Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

2 files changed, 235 insertions, 0 deletions

diff --git a/Documentation/driver-api/auxiliary_bus.rst b/Documentation/driver-api/auxiliary_bus.rst
new file mode 100644
index 000000000000..2312506b0674
--- /dev/null
+++ b/Documentation/driver-api/auxiliary_bus.rst
@@ -0,0 +1,234 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=============
+Auxiliary Bus
+=============
+
+In some subsystems, the functionality of the core device (PCI/ACPI/other) is
+too complex for a single device to be managed by a monolithic driver
+(e.g. Sound Open Firmware), multiple devices might implement a common
+intersection of functionality (e.g. NICs + RDMA), or a driver may want to
+export an interface for another subsystem to drive (e.g. SIOV Physical Function
+export Virtual Function management).  A split of the functinoality into child-
+devices representing sub-domains of functionality makes it possible to
+compartmentalize, layer, and distribute domain-specific concerns via a Linux
+device-driver model.
+
+An example for this kind of requirement is the audio subsystem where a single
+IP is handling multiple entities such as HDMI, Soundwire, local devices such as
+mics/speakers etc. The split for the core's functionality can be arbitrary or
+be defined by the DSP firmware topology and include hooks for test/debug. This
+allows for the audio core device to be minimal and focused on hardware-specific
+control and communication.
+
+Each auxiliary_device represents a part of its parent functionality. The
+generic behavior can be extended and specialized as needed by encapsulating an
+auxiliary_device within other domain-specific structures and the use of .ops
+callbacks. Devices on the auxiliary bus do not share any structures and the use
+of a communication channel with the parent is domain-specific.
+
+Note that ops are intended as a way to augment instance behavior within a class
+of auxiliary devices, it is not the mechanism for exporting common
+infrastructure from the parent. Consider EXPORT_SYMBOL_NS() to convey
+infrastructure from the parent module to the auxiliary module(s).
+
+
+When Should the Auxiliary Bus Be Used
+=====================================
+
+The auxiliary bus is to be used when a driver and one or more kernel modules,
+who share a common header file with the driver, need a mechanism to connect and
+provide access to a shared object allocated by the auxiliary_device's
+registering driver.  The registering driver for the auxiliary_device(s) and the
+kernel module(s) registering auxiliary_drivers can be from the same subsystem,
+or from multiple subsystems.
+
+The emphasis here is on a common generic interface that keeps subsystem
+customization out of the bus infrastructure.
+
+One example is a PCI network device that is RDMA-capable and exports a child
+device to be driven by an auxiliary_driver in the RDMA subsystem.  The PCI
+driver allocates and registers an auxiliary_device for each physical
+function on the NIC.  The RDMA driver registers an auxiliary_driver that claims
+each of these auxiliary_devices.  This conveys data/ops published by the parent
+PCI device/driver to the RDMA auxiliary_driver.
+
+Another use case is for the PCI device to be split out into multiple sub
+functions.  For each sub function an auxiliary_device is created.  A PCI sub
+function driver binds to such devices that creates its own one or more class
+devices.  A PCI sub function auxiliary device is likely to be contained in a
+struct with additional attributes such as user defined sub function number and
+optional attributes such as resources and a link to the parent device.  These
+attributes could be used by systemd/udev; and hence should be initialized
+before a driver binds to an auxiliary_device.
+
+A key requirement for utilizing the auxiliary bus is that there is no
+dependency on a physical bus, device, register accesses or regmap support.
+These individual devices split from the core cannot live on the platform bus as
+they are not physical devices that are controlled by DT/ACPI.  The same
+argument applies for not using MFD in this scenario as MFD relies on individual
+function devices being physical devices.
+
+Auxiliary Device
+================
+
+An auxiliary_device represents a part of its parent device's functionality. It
+is given a name that, combined with the registering drivers KBUILD_MODNAME,
+creates a match_name that is used for driver binding, and an id that combined
+with the match_name provide a unique name to register with the bus subsystem.
+
+Registering an auxiliary_device is a two-step process.  First call
+auxiliary_device_init(), which checks several aspects of the auxiliary_device
+struct and performs a device_initialize().  After this step completes, any
+error state must have a call to auxiliary_device_uninit() in its resolution path.
+The second step in registering an auxiliary_device is to perform a call to
+auxiliary_device_add(), which sets the name of the device and add the device to
+the bus.
+
+Unregistering an auxiliary_device is also a two-step process to mirror the
+register process.  First call auxiliary_device_delete(), then call
+auxiliary_device_uninit().
+
+.. code-block:: c
+
+	struct auxiliary_device {
+		struct device dev;
+                const char *name;
+		u32 id;
+	};
+
+If two auxiliary_devices both with a match_name "mod.foo" are registered onto
+the bus, they must have unique id values (e.g. "x" and "y") so that the
+registered devices names are "mod.foo.x" and "mod.foo.y".  If match_name + id
+are not unique, then the device_add fails and generates an error message.
+
+The auxiliary_device.dev.type.release or auxiliary_device.dev.release must be
+populated with a non-NULL pointer to successfully register the auxiliary_device.
+
+The auxiliary_device.dev.parent must also be populated.
+
+Auxiliary Device Memory Model and Lifespan
+------------------------------------------
+
+The registering driver is the entity that allocates memory for the
+auxiliary_device and register it on the auxiliary bus.  It is important to note
+that, as opposed to the platform bus, the registering driver is wholly
+responsible for the management for the memory used for the driver object.
+
+A parent object, defined in the shared header file, contains the
+auxiliary_device.  It also contains a pointer to the shared object(s), which
+also is defined in the shared header.  Both the parent object and the shared
+object(s) are allocated by the registering driver.  This layout allows the
+auxiliary_driver's registering module to perform a container_of() call to go
+from the pointer to the auxiliary_device, that is passed during the call to the
+auxiliary_driver's probe function, up to the parent object, and then have
+access to the shared object(s).
+
+The memory for the auxiliary_device is freed only in its release() callback
+flow as defined by its registering driver.
+
+The memory for the shared object(s) must have a lifespan equal to, or greater
+than, the lifespan of the memory for the auxiliary_device.  The auxiliary_driver
+should only consider that this shared object is valid as long as the
+auxiliary_device is still registered on the auxiliary bus.  It is up to the
+registering driver to manage (e.g. free or keep available) the memory for the
+shared object beyond the life of the auxiliary_device.
+
+The registering driver must unregister all auxiliary devices before its own
+driver.remove() is completed.
+
+Auxiliary Drivers
+=================
+
+Auxiliary drivers follow the standard driver model convention, where
+discovery/enumeration is handled by the core, and drivers
+provide probe() and remove() methods. They support power management
+and shutdown notifications using the standard conventions.
+
+.. code-block:: c
+
+	struct auxiliary_driver {
+		int (*probe)(struct auxiliary_device *,
+                             const struct auxiliary_device_id *id);
+		void (*remove)(struct auxiliary_device *);
+		void (*shutdown)(struct auxiliary_device *);
+		int (*suspend)(struct auxiliary_device *, pm_message_t);
+		int (*resume)(struct auxiliary_device *);
+		struct device_driver driver;
+		const struct auxiliary_device_id *id_table;
+	};
+
+Auxiliary drivers register themselves with the bus by calling
+auxiliary_driver_register(). The id_table contains the match_names of auxiliary
+devices that a driver can bind with.
+
+Example Usage
+=============
+
+Auxiliary devices are created and registered by a subsystem-level core device
+that needs to break up its functionality into smaller fragments. One way to
+extend the scope of an auxiliary_device is to encapsulate it within a domain-
+pecific structure defined by the parent device. This structure contains the
+auxiliary_device and any associated shared data/callbacks needed to establish
+the connection with the parent.
+
+An example is:
+
+.. code-block:: c
+
+        struct foo {
+		struct auxiliary_device auxdev;
+		void (*connect)(struct auxiliary_device *auxdev);
+		void (*disconnect)(struct auxiliary_device *auxdev);
+		void *data;
+        };
+
+The parent device then registers the auxiliary_device by calling
+auxiliary_device_init(), and then auxiliary_device_add(), with the pointer to
+the auxdev member of the above structure. The parent provides a name for the
+auxiliary_device that, combined with the parent's KBUILD_MODNAME, creates a
+match_name that is be used for matching and binding with a driver.
+
+Whenever an auxiliary_driver is registered, based on the match_name, the
+auxiliary_driver's probe() is invoked for the matching devices.  The
+auxiliary_driver can also be encapsulated inside custom drivers that make the
+core device's functionality extensible by adding additional domain-specific ops
+as follows:
+
+.. code-block:: c
+
+	struct my_ops {
+		void (*send)(struct auxiliary_device *auxdev);
+		void (*receive)(struct auxiliary_device *auxdev);
+	};
+
+
+	struct my_driver {
+		struct auxiliary_driver auxiliary_drv;
+		const struct my_ops ops;
+	};
+
+An example of this type of usage is:
+
+.. code-block:: c
+
+	const struct auxiliary_device_id my_auxiliary_id_table[] = {
+		{ .name = "foo_mod.foo_dev" },
+		{ },
+	};
+
+	const struct my_ops my_custom_ops = {
+		.send = my_tx,
+		.receive = my_rx,
+	};
+
+	const struct my_driver my_drv = {
+		.auxiliary_drv = {
+			.name = "myauxiliarydrv",
+			.id_table = my_auxiliary_id_table,
+			.probe = my_probe,
+			.remove = my_remove,
+			.shutdown = my_shutdown,
+		},
+		.ops = my_custom_ops,
+	};
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 08c32952fce3..2456d0a97ed8 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -73,6 +73,7 @@ available subsections can be seen below.
    thermal/index
    fpga/index
    acpi/index
+   auxiliary_bus
    backlight/lp855x-driver.rst
    connector
    console