docs: fb: convert docs to ReST and rename to *.rst

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Also, removed the Maintained by, as requested by Geert.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

1 files changed, 155 insertions, 0 deletions

diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
new file mode 100644
index 000000000000..3c2397293977
--- /dev/null
+++ b/Documentation/fb/modedb.rst
@@ -0,0 +1,155 @@
+=================================
+modedb default video mode support
+=================================
+
+
+Currently all frame buffer device drivers have their own video mode databases,
+which is a mess and a waste of resources. The main idea of modedb is to have
+
+  - one routine to probe for video modes, which can be used by all frame buffer
+    devices
+  - one generic video mode database with a fair amount of standard videomodes
+    (taken from XFree86)
+  - the possibility to supply your own mode database for graphics hardware that
+    needs non-standard modes, like amifb and Mac frame buffer drivers (which
+    use macmodes.c)
+
+When a frame buffer device receives a video= option it doesn't know, it should
+consider that to be a video mode option. If no frame buffer device is specified
+in a video= option, fbmem considers that to be a global video mode option.
+
+Valid mode specifiers (mode_option argument)::
+
+    <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+    <name>[-<bpp>][@<refresh>]
+
+with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
+Things between square brackets are optional.
+
+If 'M' is specified in the mode_option argument (after <yres> and before
+<bpp> and <refresh>, if specified) the timings will be calculated using
+VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.
+If 'R' is specified, do a 'reduced blanking' calculation for digital displays.
+If 'i' is specified, calculate for an interlaced mode.  And if 'm' is
+specified, add margins to the calculation (1.8% of xres rounded down to 8
+pixels and 1.8% of yres).
+
+       Sample usage: 1024x768M@60m - CVT timing with margins
+
+DRM drivers also add options to enable or disable outputs:
+
+'e' will force the display to be enabled, i.e. it will override the detection
+if a display is connected. 'D' will force the display to be enabled and use
+digital output. This is useful for outputs that have both analog and digital
+signals (e.g. HDMI and DVI-I). For other outputs it behaves like 'e'. If 'd'
+is specified the output is disabled.
+
+You can additionally specify which output the options matches to.
+To force the VGA output to be enabled and drive a specific mode say::
+
+    video=VGA-1:1280x1024@60me
+
+Specifying the option multiple times for different ports is possible, e.g.::
+
+    video=LVDS-1:d video=HDMI-1:D
+
+-----------------------------------------------------------------------------
+
+What is the VESA(TM) Coordinated Video Timings (CVT)?
+=====================================================
+
+From the VESA(TM) Website:
+
+     "The purpose of CVT is to provide a method for generating a consistent
+      and coordinated set of standard formats, display refresh rates, and
+      timing specifications for computer display products, both those
+      employing CRTs, and those using other display technologies. The
+      intention of CVT is to give both source and display manufacturers a
+      common set of tools to enable new timings to be developed in a
+      consistent manner that ensures greater compatibility."
+
+This is the third standard approved by VESA(TM) concerning video timings.  The
+first was the Discrete Video Timings (DVT) which is  a collection of
+pre-defined modes approved by VESA(TM).  The second is the Generalized Timing
+Formula (GTF) which is an algorithm to calculate the timings, given the
+pixelclock, the horizontal sync frequency, or the vertical refresh rate.
+
+The GTF is limited by the fact that it is designed mainly for CRT displays.
+It artificially increases the pixelclock because of its high blanking
+requirement. This is inappropriate for digital display interface with its high
+data rate which requires that it conserves the pixelclock as much as possible.
+Also, GTF does not take into account the aspect ratio of the display.
+
+The CVT addresses these limitations.  If used with CRT's, the formula used
+is a derivation of GTF with a few modifications.  If used with digital
+displays, the "reduced blanking" calculation can be used.
+
+From the framebuffer subsystem perspective, new formats need not be added
+to the global mode database whenever a new mode is released by display
+manufacturers. Specifying for CVT will work for most, if not all, relatively
+new CRT displays and probably with most flatpanels, if 'reduced blanking'
+calculation is specified.  (The CVT compatibility of the display can be
+determined from its EDID. The version 1.3 of the EDID has extra 128-byte
+blocks where additional timing information is placed.  As of this time, there
+is no support yet in the layer to parse this additional blocks.)
+
+CVT also introduced a new naming convention (should be seen from dmesg output)::
+
+    <pix>M<a>[-R]
+
+    where: pix = total amount of pixels in MB (xres x yres)
+	   M   = always present
+	   a   = aspect ratio (3 - 4:3; 4 - 5:4; 9 - 15:9, 16:9; A - 16:10)
+	  -R   = reduced blanking
+
+	  example:  .48M3-R - 800x600 with reduced blanking
+
+Note: VESA(TM) has restrictions on what is a standard CVT timing:
+
+      - aspect ratio can only be one of the above values
+      - acceptable refresh rates are 50, 60, 70 or 85 Hz only
+      - if reduced blanking, the refresh rate must be at 60Hz
+
+If one of the above are not satisfied, the kernel will print a warning but the
+timings will still be calculated.
+
+-----------------------------------------------------------------------------
+
+To find a suitable video mode, you just call::
+
+  int __init fb_find_mode(struct fb_var_screeninfo *var,
+			  struct fb_info *info, const char *mode_option,
+			  const struct fb_videomode *db, unsigned int dbsize,
+			  const struct fb_videomode *default_mode,
+			  unsigned int default_bpp)
+
+with db/dbsize your non-standard video mode database, or NULL to use the
+standard video mode database.
+
+fb_find_mode() first tries the specified video mode (or any mode that matches,
+e.g. there can be multiple 640x480 modes, each of them is tried). If that
+fails, the default mode is tried. If that fails, it walks over all modes.
+
+To specify a video mode at bootup, use the following boot options::
+
+    video=<driver>:<xres>x<yres>[-<bpp>][@refresh]
+
+where <driver> is a name from the table below.  Valid default modes can be
+found in linux/drivers/video/modedb.c.  Check your driver's documentation.
+There may be more modes::
+
+    Drivers that support modedb boot options
+    Boot Name	  Cards Supported
+
+    amifb	- Amiga chipset frame buffer
+    aty128fb	- ATI Rage128 / Pro frame buffer
+    atyfb	- ATI Mach64 frame buffer
+    pm2fb	- Permedia 2/2V frame buffer
+    pm3fb	- Permedia 3 frame buffer
+    sstfb	- Voodoo 1/2 (SST1) chipset frame buffer
+    tdfxfb	- 3D Fx frame buffer
+    tridentfb	- Trident (Cyber)blade chipset frame buffer
+    vt8623fb	- VIA 8623 frame buffer
+
+BTW, only a few fb drivers use this at the moment. Others are to follow
+(feel free to send patches). The DRM drivers also support this.