docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 90 deletions

diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
deleted file mode 100644
index e0951c4e57bb..000000000000
--- a/Documentation/hwmon/ads1015
+++ /dev/null
@@ -1,90 +0,0 @@
-Kernel driver ads1015
-=====================
-
-Supported chips:
-
-  * Texas Instruments ADS1015
-
-    Prefix: 'ads1015'
-
-    Datasheet: Publicly available at the Texas Instruments website:
-
-	       http://focus.ti.com/lit/ds/symlink/ads1015.pdf
-
-  * Texas Instruments ADS1115
-
-    Prefix: 'ads1115'
-
-    Datasheet: Publicly available at the Texas Instruments website:
-
-	       http://focus.ti.com/lit/ds/symlink/ads1115.pdf
-
-Authors:
-	Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
-
-Description
------------
-
-This driver implements support for the Texas Instruments ADS1015/ADS1115.
-
-This device is a 12/16-bit A-D converter with 4 inputs.
-
-The inputs can be used single ended or in certain differential combinations.
-
-The inputs can be made available by 8 sysfs input files in0_input - in7_input:
-
-  - in0: Voltage over AIN0 and AIN1.
-  - in1: Voltage over AIN0 and AIN3.
-  - in2: Voltage over AIN1 and AIN3.
-  - in3: Voltage over AIN2 and AIN3.
-  - in4: Voltage over AIN0 and GND.
-  - in5: Voltage over AIN1 and GND.
-  - in6: Voltage over AIN2 and GND.
-  - in7: Voltage over AIN3 and GND.
-
-Which inputs are available can be configured using platform data or devicetree.
-
-By default all inputs are exported.
-
-Platform Data
--------------
-
-In linux/platform_data/ads1015.h platform data is defined, channel_data contains
-configuration data for the used input combinations:
-
-- pga is the programmable gain amplifier (values are full scale)
-
-    - 0: +/- 6.144 V
-    - 1: +/- 4.096 V
-    - 2: +/- 2.048 V
-    - 3: +/- 1.024 V
-    - 4: +/- 0.512 V
-    - 5: +/- 0.256 V
-
-- data_rate in samples per second
-
-    - 0: 128
-    - 1: 250
-    - 2: 490
-    - 3: 920
-    - 4: 1600
-    - 5: 2400
-    - 6: 3300
-
-Example::
-
-  struct ads1015_platform_data data = {
-	.channel_data = {
-		[2] = { .enabled = true, .pga = 1, .data_rate = 0 },
-		[4] = { .enabled = true, .pga = 4, .data_rate = 5 },
-	}
-  };
-
-In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
-(FS +/- 0.512 V, 2400 SPS) would be created.
-
-Devicetree
-----------
-
-Configuration is also possible via devicetree:
-Documentation/devicetree/bindings/hwmon/ads1015.txt