docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 160 deletions

diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
deleted file mode 100644
index 6fd4d2df5420..000000000000
--- a/Documentation/hwmon/lm75
+++ /dev/null
@@ -1,160 +0,0 @@
-Kernel driver lm75
-==================
-
-Supported chips:
-
-  * National Semiconductor LM75
-
-    Prefix: 'lm75'
-
-    Addresses scanned: I2C 0x48 - 0x4f
-
-    Datasheet: Publicly available at the National Semiconductor website
-
-	       http://www.national.com/
-
-  * National Semiconductor LM75A
-
-    Prefix: 'lm75a'
-
-    Addresses scanned: I2C 0x48 - 0x4f
-
-    Datasheet: Publicly available at the National Semiconductor website
-
-	       http://www.national.com/
-
-  * Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505
-
-    Prefixes: 'ds75', 'ds1775', 'ds7505'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the Maxim website
-
-	       http://www.maximintegrated.com/
-
-  * Maxim MAX6625, MAX6626, MAX31725, MAX31726
-
-    Prefixes: 'max6625', 'max6626', 'max31725', 'max31726'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the Maxim website
-
-	       http://www.maxim-ic.com/
-
-  * Microchip (TelCom) TCN75
-
-    Prefix: 'tcn75'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the Microchip website
-
-	       http://www.microchip.com/
-
-  * Microchip MCP9800, MCP9801, MCP9802, MCP9803
-
-    Prefix: 'mcp980x'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the Microchip website
-
-	       http://www.microchip.com/
-
-  * Analog Devices ADT75
-
-    Prefix: 'adt75'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the Analog Devices website
-
-	       http://www.analog.com/adt75
-
-  * ST Microelectronics STDS75
-
-    Prefix: 'stds75'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the ST website
-
-	       http://www.st.com/internet/analog/product/121769.jsp
-
-  * ST Microelectronics STLM75
-
-    Prefix: 'stlm75'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the ST website
-
-	       https://www.st.com/resource/en/datasheet/stlm75.pdf
-
-  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275
-
-    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the Texas Instruments website
-
-	       http://www.ti.com/product/tmp100
-
-	       http://www.ti.com/product/tmp101
-
-	       http://www.ti.com/product/tmp105
-
-	       http://www.ti.com/product/tmp112
-
-	       http://www.ti.com/product/tmp75
-
-	       http://www.ti.com/product/tmp75c
-
-	       http://www.ti.com/product/tmp175
-
-	       http://www.ti.com/product/tmp275
-
-  * NXP LM75B
-
-    Prefix: 'lm75b'
-
-    Addresses scanned: none
-
-    Datasheet: Publicly available at the NXP website
-
-	       http://www.nxp.com/documents/data_sheet/LM75B.pdf
-
-Author: Frodo Looijaard <frodol@dds.nl>
-
-Description
------------
-
-The LM75 implements one temperature sensor. Limits can be set through the
-Overtemperature Shutdown register and Hysteresis register. Each value can be
-set and read to half-degree accuracy.
-An alarm is issued (usually to a connected LM78) when the temperature
-gets higher then the Overtemperature Shutdown value; it stays on until
-the temperature falls below the Hysteresis value.
-All temperatures are in degrees Celsius, and are guaranteed within a
-range of -55 to +125 degrees.
-
-The driver caches the values for a period varying between 1 second for the
-slowest chips and 125 ms for the fastest chips; reading it more often
-will do no harm, but will return 'old' values.
-
-The original LM75 was typically used in combination with LM78-like chips
-on PC motherboards, to measure the temperature of the processor(s). Clones
-are now used in various embedded designs.
-
-The LM75 is essentially an industry standard; there may be other
-LM75 clones not listed here, with or without various enhancements,
-that are supported. The clones are not detected by the driver, unless
-they reproduce the exact register tricks of the original LM75, and must
-therefore be instantiated explicitly. Higher resolution up to 16-bit
-is supported by this driver, other specific enhancements are not.
-
-The LM77 is not supported, contrary to what we pretended for a long time.
-Both chips are simply not compatible, value encoding differs.