docs: hwmon: convert remaining files to ReST format

Convert all other hwmon files to ReST format, in order to allow
them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 73 insertions, 24 deletions

diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 2329c383efe4..faa92f54431c 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -2,49 +2,85 @@ Kernel driver lm85
 ==================
 
 Supported chips:
+
   * National Semiconductor LM85 (B and C versions)
+
     Prefix: 'lm85b' or 'lm85c'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.national.com/pf/LM/LM85.html
+
   * Texas Instruments LM96000
+
     Prefix: 'lm9600'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.ti.com/lit/ds/symlink/lm96000.pdf
+
   * Analog Devices ADM1027
+
     Prefix: 'adm1027'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADM1027
+
   * Analog Devices ADT7463
+
     Prefix: 'adt7463'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
+
   * Analog Devices ADT7468
+
     Prefix: 'adt7468'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468
+
   * SMSC EMC6D100, SMSC EMC6D101
+
     Prefix: 'emc6d100'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf 
+
+    Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf
+
   * SMSC EMC6D102
+
     Prefix: 'emc6d102'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.smsc.com/main/catalog/emc6d102.html
+
   * SMSC EMC6D103
+
     Prefix: 'emc6d103'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.smsc.com/main/catalog/emc6d103.html
+
   * SMSC EMC6D103S
+
     Prefix: 'emc6d103s'
+
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+
     Datasheet: http://www.smsc.com/main/catalog/emc6d103s.html
 
 Authors:
-        Philip Pokorny <ppokorny@penguincomputing.com>,
-        Frodo Looijaard <frodol@dds.nl>,
-        Richard Barrington <rich_b_nz@clear.net.nz>,
-        Margit Schubert-While <margitsw@t-online.de>,
-        Justin Thiessen <jthiessen@penguincomputing.com>
+       - Philip Pokorny <ppokorny@penguincomputing.com>,
+       - Frodo Looijaard <frodol@dds.nl>,
+       - Richard Barrington <rich_b_nz@clear.net.nz>,
+       - Margit Schubert-While <margitsw@t-online.de>,
+       - Justin Thiessen <jthiessen@penguincomputing.com>
 
 Description
 -----------
@@ -177,38 +213,50 @@ Each temperature sensor is associated with a Zone. There are three
 sensors and therefore three zones (# 1, 2 and 3). Each zone has the following
 temperature configuration points:
 
-* temp#_auto_temp_off - temperature below which fans should be off or spinning very low.
-* temp#_auto_temp_min - temperature over which fans start to spin.
-* temp#_auto_temp_max - temperature when fans spin at full speed.
-* temp#_auto_temp_crit - temperature when all fans will run full speed.
+* temp#_auto_temp_off
+	- temperature below which fans should be off or spinning very low.
+* temp#_auto_temp_min
+	- temperature over which fans start to spin.
+* temp#_auto_temp_max
+	- temperature when fans spin at full speed.
+* temp#_auto_temp_crit
+	- temperature when all fans will run full speed.
 
-* PWM Control
+PWM Control
+^^^^^^^^^^^
 
 There are three PWM outputs. The LM85 datasheet suggests that the
 pwm3 output control both fan3 and fan4. Each PWM can be individually
 configured and assigned to a zone for its control value. Each PWM can be
 configured individually according to the following options.
 
-* pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off
-                      temperature. (PWM value from 0 to 255)
+* pwm#_auto_pwm_min
+	- this specifies the PWM value for temp#_auto_temp_off
+	  temperature. (PWM value from 0 to 255)
+
+* pwm#_auto_pwm_minctl
+	- this flags selects for temp#_auto_temp_off temperature
+	  the behaviour of fans. Write 1 to let fans spinning at
+	  pwm#_auto_pwm_min or write 0 to let them off.
 
-* pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature
-                         the behaviour of fans. Write 1 to let fans spinning at
-			 pwm#_auto_pwm_min or write 0 to let them off.
+.. note::
 
-NOTE: It has been reported that there is a bug in the LM85 that causes the flag
-to be associated with the zones not the PWMs. This contradicts all the
-published documentation. Setting pwm#_min_ctl in this case actually affects all
-PWMs controlled by zone '#'.
+	It has been reported that there is a bug in the LM85 that causes
+	the flag to be associated with the zones not the PWMs. This
+	contradicts all the published documentation. Setting pwm#_min_ctl
+	in this case actually affects all PWMs controlled by zone '#'.
 
-* PWM Controlling Zone selection
+PWM Controlling Zone selection
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-* pwm#_auto_channels - controls zone that is associated with PWM
+* pwm#_auto_channels
+	- controls zone that is associated with PWM
 
 Configuration choices:
 
-   Value     Meaning
-  ------  ------------------------------------------------
+========== =============================================
+Value      Meaning
+========== =============================================
       1    Controlled by Zone 1
       2    Controlled by Zone 2
       3    Controlled by Zone 3
@@ -217,6 +265,7 @@ Configuration choices:
       0    PWM always 0%  (off)
      -1    PWM always 100%  (full on)
      -2    Manual control (write to 'pwm#' to set)
+========== =============================================
 
 The National LM85's have two vendor specific configuration
 features. Tach. mode and Spinup Control. For more details on these,