diff options
| author | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-04-17 11:46:28 +0200 |
|---|---|---|
| committer | Guenter Roeck <linux@roeck-us.net> | 2019-04-17 19:36:05 +0200 |
| commit | b04f2f7d387b3160883c2a1f5e2285483a791e82 (patch) | |
| tree | b834fd1570d09542b32408c5b1a03d57db6f9dd5 /Documentation/hwmon/ltc4151 | |
| parent | docs: hwmon: misc files: convert to ReST format (diff) | |
| download | linux-b04f2f7d387b3160883c2a1f5e2285483a791e82.tar.xz linux-b04f2f7d387b3160883c2a1f5e2285483a791e82.zip | |
docs: hwmon: convert remaining files to ReST format
Convert all other hwmon files to ReST format, in order to allow
them to be parsed by Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'Documentation/hwmon/ltc4151')
| -rw-r--r-- | Documentation/hwmon/ltc4151 | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/Documentation/hwmon/ltc4151 b/Documentation/hwmon/ltc4151 index 43c667e6677a..c39229b19624 100644 --- a/Documentation/hwmon/ltc4151 +++ b/Documentation/hwmon/ltc4151 @@ -2,11 +2,16 @@ Kernel driver ltc4151 ===================== Supported chips: + * Linear Technology LTC4151 + Prefix: 'ltc4151' + Addresses scanned: - + Datasheet: - http://www.linear.com/docs/Datasheet/4151fc.pdf + + http://www.linear.com/docs/Datasheet/4151fc.pdf Author: Per Dalen <per.dalen@appeartv.com> @@ -25,9 +30,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4151 at address 0x6f -on I2C bus #0: -# modprobe ltc4151 -# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device +on I2C bus #0:: + + # modprobe ltc4151 + # echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device Sysfs entries @@ -40,8 +46,10 @@ Current reading provided by this driver is reported as obtained from the Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. +======================= ================== in1_input VDIN voltage (mV) in2_input ADIN voltage (mV) curr1_input SENSE current (mA) +======================= ================== |