hwmon: Add driver for NZXT Kraken X and Z series AIO CPU coolers

This driver enables hardware monitoring support for NZXT Kraken
X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers.

All models expose liquid temperature and pump speed (in RPM), as well as
PWM control (natively only through a temp-PWM curve, but the driver also
emulates fixed PWM control on top of that). The Z-series models
additionally expose the speed and duty of an optionally connected fan,
with the same PWM control capabilities.

Pump and fan duty control mode can be set through pwm[1-2]_enable,
where 1 is for the manual control mode and 2 is for the liquid temp
to PWM curve mode. Writing a 0 disables control of the channel through
the driver after setting its duty to 100%. As it is not possible to query
the device for the active mode, the driver keeps track of it.

The temperature of the curves relates to the fixed [20-59] C range, per
device limitations, and correlating to the detected liquid temperature.
Only PWM values (ranging from 0-255) can be set.

The addressable RGB LEDs and LCD screen, included only on Z-series models,
are not supported in this driver.

Co-developed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Co-developed-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240129111932.368232-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

2 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 0d12254c0f9e..6f8a4a7524e8 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -174,6 +174,7 @@ Hardware Monitoring Kernel Drivers
    nsa320
    ntc_thermistor
    nzxt-kraken2
+   nzxt-kraken3
    nzxt-smart2
    occ
    oxp-sensors
diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst
new file mode 100644
index 000000000000..90fd9dec15ff
--- /dev/null
+++ b/Documentation/hwmon/nzxt-kraken3.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken3
+==========================
+
+Supported devices:
+
+* NZXT Kraken X53
+* NZXT Kraken X63
+* NZXT Kraken X73
+* NZXT Kraken Z53
+* NZXT Kraken Z63
+* NZXT Kraken Z73
+
+Author: Jonas Malaco, Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and
+Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature
+and pump speed (in RPM), as well as PWM control (either as a fixed value
+or through a temp-PWM curve). The Z-series models additionally expose the speed
+and duty of an optionally connected fan, with the same PWM control capabilities.
+
+Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is
+for the manual control mode and 2 is for the liquid temp to PWM curve mode.
+Writing a 0 disables control of the channel through the driver after setting its
+duty to 100%.
+
+The temperature of the curves relates to the fixed [20-59] range, correlating to
+the detected liquid temperature. Only PWM values (ranging from 0-255) can be set.
+If in curve mode, setting point values should be done in moderation - the devices
+require complete curves to be sent for each change; they can lock up or discard
+the changes if they are too numerous at once. Suggestion is to set them while
+in an another mode, and then apply them by switching to curve.
+
+The devices can report if they are faulty. The driver supports that situation
+and will issue a warning. This can also happen when the USB cable is connected,
+but SATA power is not.
+
+The addressable RGB LEDs and LCD screen (only on Z-series models) are not
+supported in this driver, but can be controlled through existing userspace tools,
+such as `liquidctl`_.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Possible pwm_enable values are:
+
+====== ==========================================================================
+0      Set fan to 100%
+1      Direct PWM mode (applies value in corresponding PWM entry)
+2      Curve control mode (applies the temp-PWM duty curve based on coolant temp)
+====== ==========================================================================
+
+Sysfs entries
+-------------
+
+============================== ================================================================
+fan1_input                     Pump speed (in rpm)
+fan2_input                     Fan speed (in rpm)
+temp1_input                    Coolant temperature (in millidegrees Celsius)
+pwm1                           Pump duty (value between 0-255)
+pwm1_enable                    Pump duty control mode (0: disabled, 1: manual, 2: curve)
+pwm2                           Fan duty (value between 0-255)
+pwm2_enable                    Fan duty control mode (0: disabled, 1: manual, 2: curve)
+temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp
+============================== ================================================================