Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Documentation for digital TV (both kAPI and uAPI) are now in sync
   with the implementation (except for legacy/deprecated ioctls). This
   is a major step, as there were always a gap there

 - New sensor driver: imx274

 - New cec driver: cec-gpio

 - New platform driver for rockship rga and tegra CEC

 - New RC driver: tango-ir

 - Several cleanups at atomisp driver

 - Core improvements for RC, CEC, V4L2 async probing support and DVB

 - Lots of drivers cleanup, fixes and improvements.

* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
  dvb_frontend: don't use-after-free the frontend struct
  media: dib0700: fix invalid dvb_detach argument
  media: v4l2-ctrls: Don't validate BITMASK twice
  media: s5p-mfc: fix lockdep warning
  media: dvb-core: always call invoke_release() in fe_free()
  media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
  media: au0828: make const array addr_list static
  media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
  media: drxd: make const array fastIncrDecLUT static
  media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
  media: ddbridge: fix build warnings
  media: av7110: avoid 2038 overflow in debug print
  media: Don't do DMA on stack for firmware upload in the AS102 driver
  media: v4l: async: fix unregister for implicitly registered sub-device notifiers
  media: v4l: async: fix return of unitialized variable ret
  media: imx274: fix missing return assignment from call to imx274_mode_regs
  media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
  media: atomisp: make function calls cleaner
  media: atomisp: get rid of storage_class.h
  media: atomisp: get rid of wrong stddef.h include
  ...

5 files changed, 37 insertions, 382 deletions

diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
index a5c821809cc6..b6fd86424fbb 100644
--- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
@@ -161,6 +161,24 @@ it is guaranteed that the state did change in between the two events.
       - Generated if the CEC pin goes from a low voltage to a high voltage.
         Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
 	capability set.
+    * .. _`CEC-EVENT-PIN-HPD-LOW`:
+
+      - ``CEC_EVENT_PIN_HPD_LOW``
+      - 5
+      - Generated if the HPD pin goes from a high voltage to a low voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the HPD pin can be read and
+	if the HPD is low, then an initial event will be generated for that
+	filehandle.
+    * .. _`CEC-EVENT-PIN-HPD-HIGH`:
+
+      - ``CEC_EVENT_PIN_HPD_HIGH``
+      - 6
+      - Generated if the HPD pin goes from a low voltage to a high voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the HPD pin can be read and
+	if the HPD is high, then an initial event will be generated for that
+	filehandle.
 
 
 .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
@@ -172,9 +190,9 @@ it is guaranteed that the state did change in between the two events.
     :stub-columns: 0
     :widths:       3 1 8
 
-    * .. _`CEC-EVENT-FL-INITIAL-VALUE`:
+    * .. _`CEC-EVENT-FL-INITIAL-STATE`:
 
-      - ``CEC_EVENT_FL_INITIAL_VALUE``
+      - ``CEC_EVENT_FL_INITIAL_STATE``
       - 1
       - Set for the initial events that are generated when the device is
 	opened. See the table above for which events do this. This allows
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index 0f397c535a4c..bdad4b197bcd 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -131,7 +131,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - ``tx_status``
       - The status bits of the transmitted message. See
 	:ref:`cec-tx-status` for the possible status values. It is 0 if
-	this messages was received, not transmitted.
+	this message was received, not transmitted.
     * - __u8
       - ``msg[16]``
       - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the
@@ -168,7 +168,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - ``tx_status``
       - The status bits of the transmitted message. See
 	:ref:`cec-tx-status` for the possible status values. It is 0 if
-	this messages was received, not transmitted.
+	this message was received, not transmitted.
     * - __u8
       - ``tx_arb_lost_cnt``
       - A counter of the number of transmit attempts that resulted in the
@@ -256,9 +256,9 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - ``CEC_TX_STATUS_ERROR``
       - 0x10
       - Some error occurred. This is used for any errors that do not fit
-	the previous two, either because the hardware could not tell which
-	error occurred, or because the hardware tested for other
-	conditions besides those two.
+	``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because
+	the hardware could not tell which error occurred, or because the hardware
+	tested for other conditions besides those two.
     * .. _`CEC-TX-STATUS-MAX-RETRIES`:
 
       - ``CEC_TX_STATUS_MAX_RETRIES``
diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst
index e0f627ca2e4d..16dd90fa9e94 100644
--- a/Documentation/media/uapi/dvb/examples.rst
+++ b/Documentation/media/uapi/dvb/examples.rst
@@ -6,377 +6,11 @@
 Examples
 ********
 
-In this section we would like to present some examples for using the Digital
-TV API.
+In the past, we used to have a set of examples here. However, those
+examples got out of date and doesn't even compile nowadays.
 
-.. note::
+Also, nowadays, the best is to use the libdvbv5 DVB API nowadays,
+with is fully documented.
 
-   This section is out of date, and the code below won't even
-   compile. Please refer to the
-   `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for
-   updated/recommended examples.
-
-
-.. _tuning:
-
-Example: Tuning
-===============
-
-We will start with a generic tuning subroutine that uses the frontend
-and SEC, as well as the demux devices. The example is given for QPSK
-tuners, but can easily be adjusted for QAM.
-
-
-.. code-block:: c
-
-     #include <sys/ioctl.h>
-     #include <stdio.h>
-     #include <stdint.h>
-     #include <sys/types.h>
-     #include <sys/stat.h>
-     #include <fcntl.h>
-     #include <time.h>
-     #include <unistd.h>
-
-     #include <linux/dvb/dmx.h>
-     #include <linux/dvb/frontend.h>
-     #include <linux/dvb/sec.h>
-     #include <sys/poll.h>
-
-     #define DMX "/dev/dvb/adapter0/demux1"
-     #define FRONT "/dev/dvb/adapter0/frontend1"
-     #define SEC "/dev/dvb/adapter0/sec1"
-
-     /* routine for checking if we have a signal and other status information*/
-     int FEReadStatus(int fd, fe_status_t *stat)
-     {
-	 int ans;
-
-	 if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){
-	     perror("FE READ STATUS: ");
-	     return -1;
-	 }
-
-	 if (*stat & FE_HAS_POWER)
-	     printf("FE HAS POWER\\n");
-
-	 if (*stat & FE_HAS_SIGNAL)
-	     printf("FE HAS SIGNAL\\n");
-
-	 if (*stat & FE_SPECTRUM_INV)
-	     printf("SPEKTRUM INV\\n");
-
-	 return 0;
-     }
-
-
-     /* tune qpsk */
-     /* freq:             frequency of transponder                      */
-     /* vpid, apid, tpid: PIDs of video, audio and teletext TS packets  */
-     /* diseqc:           DiSEqC address of the used LNB                */
-     /* pol:              Polarisation                                  */
-     /* srate:            Symbol Rate                                   */
-     /* fec.              FEC                                           */
-     /* lnb_lof1:         local frequency of lower LNB band             */
-     /* lnb_lof2:         local frequency of upper LNB band             */
-     /* lnb_slof:         switch frequency of LNB                       */
-
-     int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
-	     int diseqc, int pol, int srate, int fec, int lnb_lof1,
-	     int lnb_lof2, int lnb_slof)
-     {
-	 struct secCommand scmd;
-	 struct secCmdSequence scmds;
-	 struct dmx_pes_filter_params pesFilterParams;
-	 FrontendParameters frp;
-	 struct pollfd pfd[1];
-	 FrontendEvent event;
-	 int demux1, demux2, demux3, front;
-
-	 frequency = (uint32_t) freq;
-	 symbolrate = (uint32_t) srate;
-
-	 if((front = open(FRONT,O_RDWR)) < 0){
-	     perror("FRONTEND DEVICE: ");
-	     return -1;
-	 }
-
-	 if((sec = open(SEC,O_RDWR)) < 0){
-	     perror("SEC DEVICE: ");
-	     return -1;
-	 }
-
-	 if (demux1 < 0){
-	     if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (demux2 < 0){
-	     if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (demux3 < 0){
-	     if ((demux3=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (freq < lnb_slof) {
-	     frp.Frequency = (freq - lnb_lof1);
-	     scmds.continuousTone = SEC_TONE_OFF;
-	 } else {
-	     frp.Frequency = (freq - lnb_lof2);
-	     scmds.continuousTone = SEC_TONE_ON;
-	 }
-	 frp.Inversion = INVERSION_AUTO;
-	 if (pol) scmds.voltage = SEC_VOLTAGE_18;
-	 else scmds.voltage = SEC_VOLTAGE_13;
-
-	 scmd.type=0;
-	 scmd.u.diseqc.addr=0x10;
-	 scmd.u.diseqc.cmd=0x38;
-	 scmd.u.diseqc.numParams=1;
-	 scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) |
-	     (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
-	     (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
-
-	 scmds.miniCommand=SEC_MINI_NONE;
-	 scmds.numCommands=1;
-	 scmds.commands=&scmd;
-	 if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
-	     perror("SEC SEND: ");
-	     return -1;
-	 }
-
-	 if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
-	     perror("SEC SEND: ");
-	     return -1;
-	 }
-
-	 frp.u.qpsk.SymbolRate = srate;
-	 frp.u.qpsk.FEC_inner = fec;
-
-	 if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){
-	     perror("QPSK TUNE: ");
-	     return -1;
-	 }
-
-	 pfd[0].fd = front;
-	 pfd[0].events = POLLIN;
-
-	 if (poll(pfd,1,3000)){
-	     if (pfd[0].revents & POLLIN){
-		 printf("Getting QPSK event\\n");
-		 if ( ioctl(front, FE_GET_EVENT, &event)
-
-		      == -EOVERFLOW){
-		     perror("qpsk get event");
-		     return -1;
-		 }
-		 printf("Received ");
-		 switch(event.type){
-		 case FE_UNEXPECTED_EV:
-		     printf("unexpected event\\n");
-		     return -1;
-		 case FE_FAILURE_EV:
-		     printf("failure event\\n");
-		     return -1;
-
-		 case FE_COMPLETION_EV:
-		     printf("completion event\\n");
-		 }
-	     }
-	 }
-
-
-	 pesFilterParams.pid     = vpid;
-	 pesFilterParams.input   = DMX_IN_FRONTEND;
-	 pesFilterParams.output  = DMX_OUT_DECODER;
-	 pesFilterParams.pes_type = DMX_PES_VIDEO;
-	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
-	 if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("set_vpid");
-	     return -1;
-	 }
-
-	 pesFilterParams.pid     = apid;
-	 pesFilterParams.input   = DMX_IN_FRONTEND;
-	 pesFilterParams.output  = DMX_OUT_DECODER;
-	 pesFilterParams.pes_type = DMX_PES_AUDIO;
-	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
-	 if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("set_apid");
-	     return -1;
-	 }
-
-	 pesFilterParams.pid     = tpid;
-	 pesFilterParams.input   = DMX_IN_FRONTEND;
-	 pesFilterParams.output  = DMX_OUT_DECODER;
-	 pesFilterParams.pes_type = DMX_PES_TELETEXT;
-	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
-	 if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("set_tpid");
-	     return -1;
-	 }
-
-	 return has_signal(fds);
-     }
-
-The program assumes that you are using a universal LNB and a standard
-DiSEqC switch with up to 4 addresses. Of course, you could build in some
-more checking if tuning was successful and maybe try to repeat the
-tuning process. Depending on the external hardware, i.e. LNB and DiSEqC
-switch, and weather conditions this may be necessary.
-
-
-.. _the_dvr_device:
-
-Example: The DVR device
-========================
-
-The following program code shows how to use the DVR device for
-recording.
-
-
-.. code-block:: c
-
-     #include <sys/ioctl.h>
-     #include <stdio.h>
-     #include <stdint.h>
-     #include <sys/types.h>
-     #include <sys/stat.h>
-     #include <fcntl.h>
-     #include <time.h>
-     #include <unistd.h>
-
-     #include <linux/dvb/dmx.h>
-     #include <linux/dvb/video.h>
-     #include <sys/poll.h>
-     #define DVR "/dev/dvb/adapter0/dvr1"
-     #define AUDIO "/dev/dvb/adapter0/audio1"
-     #define VIDEO "/dev/dvb/adapter0/video1"
-
-     #define BUFFY (188*20)
-     #define MAX_LENGTH (1024*1024*5) /* record 5MB */
-
-
-     /* switch the demuxes to recording, assuming the transponder is tuned */
-
-     /* demux1, demux2: file descriptor of video and audio filters */
-     /* vpid, apid:     PIDs of video and audio channels           */
-
-     int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
-     {
-	 struct dmx_pes_filter_params pesFilterParams;
-
-	 if (demux1 < 0){
-	     if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (demux2 < 0){
-	     if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 pesFilterParams.pid = vpid;
-	 pesFilterParams.input = DMX_IN_FRONTEND;
-	 pesFilterParams.output = DMX_OUT_TS_TAP;
-	 pesFilterParams.pes_type = DMX_PES_VIDEO;
-	 pesFilterParams.flags = DMX_IMMEDIATE_START;
-	 if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("DEMUX DEVICE");
-	     return -1;
-	 }
-	 pesFilterParams.pid = apid;
-	 pesFilterParams.input = DMX_IN_FRONTEND;
-	 pesFilterParams.output = DMX_OUT_TS_TAP;
-	 pesFilterParams.pes_type = DMX_PES_AUDIO;
-	 pesFilterParams.flags = DMX_IMMEDIATE_START;
-	 if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("DEMUX DEVICE");
-	     return -1;
-	 }
-	 return 0;
-     }
-
-     /* start recording MAX_LENGTH , assuming the transponder is tuned */
-
-     /* demux1, demux2: file descriptor of video and audio filters */
-     /* vpid, apid:     PIDs of video and audio channels           */
-     int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
-     {
-	 int i;
-	 int len;
-	 int written;
-	 uint8_t buf[BUFFY];
-	 uint64_t length;
-	 struct pollfd pfd[1];
-	 int dvr, dvr_out;
-
-	 /* open dvr device */
-	 if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){
-		 perror("DVR DEVICE");
-		 return -1;
-	 }
-
-	 /* switch video and audio demuxes to dvr */
-	 printf ("Switching dvr on\\n");
-	 i = switch_to_record(demux1, demux2, vpid, apid);
-	 printf("finished: ");
-
-	 printf("Recording %2.0f MB of test file in TS format\\n",
-	    MAX_LENGTH/(1024.0*1024.0));
-	 length = 0;
-
-	 /* open output file */
-	 if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
-		      |O_TRUNC, S_IRUSR|S_IWUSR
-		      |S_IRGRP|S_IWGRP|S_IROTH|
-		      S_IWOTH)) < 0){
-	     perror("Can't open file for dvr test");
-	     return -1;
-	 }
-
-	 pfd[0].fd = dvr;
-	 pfd[0].events = POLLIN;
-
-	 /* poll for dvr data and write to file */
-	 while (length < MAX_LENGTH ) {
-	     if (poll(pfd,1,1)){
-		 if (pfd[0].revents & POLLIN){
-		     len = read(dvr, buf, BUFFY);
-		     if (len < 0){
-			 perror("recording");
-			 return -1;
-		     }
-		     if (len > 0){
-			 written = 0;
-			 while (written < len)
-			     written +=
-				 write (dvr_out,
-				    buf, len);
-			 length += len;
-			 printf("written %2.0f MB\\r",
-			    length/1024./1024.);
-		     }
-		 }
-	     }
-	 }
-	 return 0;
-     }
+Please refer to the `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__
+for updated/recommended examples.
diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst
index 948d2ba84f2c..b69741d9cedf 100644
--- a/Documentation/media/uapi/dvb/fe-get-property.rst
+++ b/Documentation/media/uapi/dvb/fe-get-property.rst
@@ -48,8 +48,11 @@ depends on the delivery system and on the device:
 
    -  This call requires read/write access to the device.
 
-   -  At return, the values are updated to reflect the actual parameters
-      used.
+.. note::
+
+   At return, the values aren't updated to reflect the actual
+   parameters used. If the actual parameters are needed, an explicit
+   call to ``FE_GET_PROPERTY`` is needed.
 
 -  ``FE_GET_PROPERTY:``
 
diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst
index e1177bdcd623..8fa3292eaa42 100644
--- a/Documentation/media/uapi/dvb/net-types.rst
+++ b/Documentation/media/uapi/dvb/net-types.rst
@@ -1,6 +1,6 @@
 .. -*- coding: utf-8; mode: rst -*-
 
-.. _dmx_types:
+.. _net_types:
 
 **************
 Net Data Types