summaryrefslogtreecommitdiffstats
path: root/Documentation/media/uapi
diff options
context:
space:
mode:
authorPaul Kocialkowski <paul.kocialkowski@bootlin.com>2019-10-22 17:26:52 +0200
committerMauro Carvalho Chehab <mchehab+samsung@kernel.org>2019-10-24 23:09:18 +0200
commit256fa3920874b0f1f4cb79ad6766493a22187153 (patch)
tree36a8bd6a9644a68eabdfde5cc1cab88174893ff7 /Documentation/media/uapi
parentmedia: cedrus: Remove unnecessary parenthesis around DIV_ROUND_UP (diff)
downloadlinux-256fa3920874b0f1f4cb79ad6766493a22187153.tar.xz
linux-256fa3920874b0f1f4cb79ad6766493a22187153.zip
media: v4l: Add definitions for HEVC stateless decoding
This introduces the required definitions for HEVC decoding support with stateless VPUs. The controls associated to the HEVC slice format provide the required meta-data for decoding slices extracted from the bitstream. They are not exported to the public V4L2 API since reworking this API will likely be needed for covering various use-cases and new hardware. Multi-slice decoding is exposed as a valid decoding mode to match current H.264 support but it is not yet implemented. The interface comes with the following limitations: * No custom quantization matrices (scaling lists); * Support for a single temporal layer only; * No slice entry point offsets support; * No conformance window support; * No VUI parameters support; * No support for SPS extensions: range, multilayer, 3d, scc, 4 bits; * No support for PPS extensions: range, multilayer, 3d, scc, 4 bits. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> [hverkuil-cisco@xs4all.nl: use 1ULL in flags defines in hevc-ctrls.h] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Diffstat (limited to 'Documentation/media/uapi')
-rw-r--r--Documentation/media/uapi/v4l/biblio.rst9
-rw-r--r--Documentation/media/uapi/v4l/ext-ctrls-codec.rst553
-rw-r--r--Documentation/media/uapi/v4l/vidioc-queryctrl.rst18
3 files changed, 577 insertions, 3 deletions
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
index ad2ff258afa8..8095f57d3d75 100644
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ b/Documentation/media/uapi/v4l/biblio.rst
@@ -131,6 +131,15 @@ ITU-T Rec. H.264 Specification (04/2017 Edition)
:author: International Telecommunication Union (http://www.itu.ch)
+.. _hevc:
+
+ITU H.265/HEVC
+==============
+
+:title: ITU-T Rec. H.265 | ISO/IEC 23008-2 "High Efficiency Video Coding"
+
+:author: International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch)
+
.. _jfif:
JFIF
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
index 6bb901de0939..a1209f68c5e8 100644
--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
+++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
@@ -1985,9 +1985,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
- ``reference_ts``
- Timestamp of the V4L2 capture buffer to use as reference, used
with B-coded and P-coded frames. The timestamp refers to the
- ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
- :c:func:`v4l2_timeval_to_ns()` function to convert the struct
- :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+ ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+ :c:func:`v4l2_timeval_to_ns()` function to convert the struct
+ :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
* - __u16
- ``frame_num``
-
@@ -3695,3 +3695,550 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
disables generating SPS and PPS at every IDR. Setting it to one enables
generating SPS and PPS at every IDR.
+
+.. _v4l2-mpeg-hevc:
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)``
+ Specifies the Sequence Parameter Set fields (as extracted from the
+ bitstream) for the associated HEVC slice data.
+ These bitstream parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.3.2 "Sequence parameter set RBSP
+ semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_sps
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u16
+ - ``pic_width_in_luma_samples``
+ -
+ * - __u16
+ - ``pic_height_in_luma_samples``
+ -
+ * - __u8
+ - ``bit_depth_luma_minus8``
+ -
+ * - __u8
+ - ``bit_depth_chroma_minus8``
+ -
+ * - __u8
+ - ``log2_max_pic_order_cnt_lsb_minus4``
+ -
+ * - __u8
+ - ``sps_max_dec_pic_buffering_minus1``
+ -
+ * - __u8
+ - ``sps_max_num_reorder_pics``
+ -
+ * - __u8
+ - ``sps_max_latency_increase_plus1``
+ -
+ * - __u8
+ - ``log2_min_luma_coding_block_size_minus3``
+ -
+ * - __u8
+ - ``log2_diff_max_min_luma_coding_block_size``
+ -
+ * - __u8
+ - ``log2_min_luma_transform_block_size_minus2``
+ -
+ * - __u8
+ - ``log2_diff_max_min_luma_transform_block_size``
+ -
+ * - __u8
+ - ``max_transform_hierarchy_depth_inter``
+ -
+ * - __u8
+ - ``max_transform_hierarchy_depth_intra``
+ -
+ * - __u8
+ - ``pcm_sample_bit_depth_luma_minus1``
+ -
+ * - __u8
+ - ``pcm_sample_bit_depth_chroma_minus1``
+ -
+ * - __u8
+ - ``log2_min_pcm_luma_coding_block_size_minus3``
+ -
+ * - __u8
+ - ``log2_diff_max_min_pcm_luma_coding_block_size``
+ -
+ * - __u8
+ - ``num_short_term_ref_pic_sets``
+ -
+ * - __u8
+ - ``num_long_term_ref_pics_sps``
+ -
+ * - __u8
+ - ``chroma_format_idc``
+ -
+ * - __u64
+ - ``flags``
+ - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
+
+.. _hevc_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED``
+ - 0x00000004
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET``
+ - 0x00000008
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED``
+ - 0x00000010
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED``
+ - 0x00000020
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT``
+ - 0x00000040
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED``
+ - 0x00000080
+ -
+ * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED``
+ - 0x00000100
+ -
+
+``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)``
+ Specifies the Picture Parameter Set fields (as extracted from the
+ bitstream) for the associated HEVC slice data.
+ These bitstream parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.3.3 "Picture parameter set RBSP
+ semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_pps
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``num_extra_slice_header_bits``
+ -
+ * - __s8
+ - ``init_qp_minus26``
+ -
+ * - __u8
+ - ``diff_cu_qp_delta_depth``
+ -
+ * - __s8
+ - ``pps_cb_qp_offset``
+ -
+ * - __s8
+ - ``pps_cr_qp_offset``
+ -
+ * - __u8
+ - ``num_tile_columns_minus1``
+ -
+ * - __u8
+ - ``num_tile_rows_minus1``
+ -
+ * - __u8
+ - ``column_width_minus1[20]``
+ -
+ * - __u8
+ - ``row_height_minus1[22]``
+ -
+ * - __s8
+ - ``pps_beta_offset_div2``
+ -
+ * - __s8
+ - ``pps_tc_offset_div2``
+ -
+ * - __u8
+ - ``log2_parallel_merge_level_minus2``
+ -
+ * - __u8
+ - ``padding[4]``
+ - Applications and drivers must set this to zero.
+ * - __u64
+ - ``flags``
+ - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>`
+
+.. _hevc_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED``
+ - 0x00000004
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT``
+ - 0x00000008
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+ - 0x00000010
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED``
+ - 0x00000020
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED``
+ - 0x00000040
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT``
+ - 0x00000080
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED``
+ - 0x00000100
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED``
+ - 0x00000200
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED``
+ - 0x00000400
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED``
+ - 0x00000800
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED``
+ - 0x00001000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED``
+ - 0x00002000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED``
+ - 0x00004000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED``
+ - 0x00008000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER``
+ - 0x00010000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT``
+ - 0x00020000
+ -
+ * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
+ - 0x00040000
+ -
+
+``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
+ Specifies various slice-specific parameters, especially from the NAL unit
+ header, general slice segment header and weighted prediction parameter
+ parts of the bitstream.
+ These bitstream parameters are defined according to :ref:`hevc`.
+ They are described in section 7.4.7 "General slice segment header
+ semantics" of the specification.
+
+.. c:type:: v4l2_ctrl_hevc_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_hevc_slice_params
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``bit_size``
+ - Size (in bits) of the current slice data.
+ * - __u32
+ - ``data_bit_offset``
+ - Offset (in bits) to the video data in the current slice data.
+ * - __u8
+ - ``nal_unit_type``
+ -
+ * - __u8
+ - ``nuh_temporal_id_plus1``
+ -
+ * - __u8
+ - ``slice_type``
+ -
+ (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or
+ V4L2_HEVC_SLICE_TYPE_B).
+ * - __u8
+ - ``colour_plane_id``
+ -
+ * - __u16
+ - ``slice_pic_order_cnt``
+ -
+ * - __u8
+ - ``num_ref_idx_l0_active_minus1``
+ -
+ * - __u8
+ - ``num_ref_idx_l1_active_minus1``
+ -
+ * - __u8
+ - ``collocated_ref_idx``
+ -
+ * - __u8
+ - ``five_minus_max_num_merge_cand``
+ -
+ * - __s8
+ - ``slice_qp_delta``
+ -
+ * - __s8
+ - ``slice_cb_qp_offset``
+ -
+ * - __s8
+ - ``slice_cr_qp_offset``
+ -
+ * - __s8
+ - ``slice_act_y_qp_offset``
+ -
+ * - __s8
+ - ``slice_act_cb_qp_offset``
+ -
+ * - __s8
+ - ``slice_act_cr_qp_offset``
+ -
+ * - __s8
+ - ``slice_beta_offset_div2``
+ -
+ * - __s8
+ - ``slice_tc_offset_div2``
+ -
+ * - __u8
+ - ``pic_struct``
+ -
+ * - __u8
+ - ``num_active_dpb_entries``
+ - The number of entries in ``dpb``.
+ * - __u8
+ - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The list of L0 reference elements as indices in the DPB.
+ * - __u8
+ - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The list of L1 reference elements as indices in the DPB.
+ * - __u8
+ - ``num_rps_poc_st_curr_before``
+ - The number of reference pictures in the short-term set that come before
+ the current frame.
+ * - __u8
+ - ``num_rps_poc_st_curr_after``
+ - The number of reference pictures in the short-term set that come after
+ the current frame.
+ * - __u8
+ - ``num_rps_poc_lt_curr``
+ - The number of reference pictures in the long-term set.
+ * - __u8
+ - ``padding[7]``
+ - Applications and drivers must set this to zero.
+ * - struct :c:type:`v4l2_hevc_dpb_entry`
+ - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ - The decoded picture buffer, for meta-data about reference frames.
+ * - struct :c:type:`v4l2_hevc_pred_weight_table`
+ - ``pred_weight_table``
+ - The prediction weight coefficients for inter-picture prediction.
+ * - __u64
+ - ``flags``
+ - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>`
+
+.. _hevc_slice_params_flags:
+
+``Slice Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA``
+ - 0x00000001
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA``
+ - 0x00000002
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED``
+ - 0x00000004
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO``
+ - 0x00000008
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT``
+ - 0x00000010
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0``
+ - 0x00000020
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV``
+ - 0x00000040
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED``
+ - 0x00000080
+ -
+ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
+ - 0x00000100
+ -
+
+.. c:type:: v4l2_hevc_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_hevc_dpb_entry
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u64
+ - ``timestamp``
+ - Timestamp of the V4L2 capture buffer to use as reference, used
+ with B-coded and P-coded frames. The timestamp refers to the
+ ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+ :c:func:`v4l2_timeval_to_ns()` function to convert the struct
+ :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+ * - __u8
+ - ``rps``
+ - The reference set for the reference frame
+ (V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE,
+ V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER or
+ V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR)
+ * - __u8
+ - ``field_pic``
+ - Whether the reference is a field picture or a frame.
+ * - __u16
+ - ``pic_order_cnt[2]``
+ - The picture order count of the reference. Only the first element of the
+ array is used for frame pictures, while the first element identifies the
+ top field and the second the bottom field in field-coded pictures.
+ * - __u8
+ - ``padding[2]``
+ - Applications and drivers must set this to zero.
+
+.. c:type:: v4l2_hevc_pred_weight_table
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_hevc_pred_weight_table
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``luma_log2_weight_denom``
+ -
+ * - __s8
+ - ``delta_chroma_log2_weight_denom``
+ -
+ * - __s8
+ - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ -
+ * - __s8
+ - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ -
+ * - __s8
+ - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ -
+ * - __s8
+ - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ -
+ * - __s8
+ - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ -
+ * - __s8
+ - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
+ -
+ * - __s8
+ - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ -
+ * - __s8
+ - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]``
+ -
+ * - __u8
+ - ``padding[6]``
+ - Applications and drivers must set this to zero.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)``
+ Specifies the decoding mode to use. Currently exposes slice-based and
+ frame-based decoding but new modes might be added later on.
+ This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
+ pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
+ are required to set this control in order to specify the decoding mode
+ that is expected for the buffer.
+ Drivers may expose a single or multiple decoding modes, depending
+ on what they can support.
+
+ .. note::
+
+ This menu control is not yet part of the public kernel API and
+ it is expected to change.
+
+.. c:type:: v4l2_mpeg_video_hevc_decode_mode
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED``
+ - 0
+ - Decoding is done at the slice granularity.
+ The OUTPUT buffer must contain a single slice.
+ * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED``
+ - 1
+ - Decoding is done at the frame granularity.
+ The OUTPUT buffer must contain all slices needed to decode the
+ frame. The OUTPUT buffer must also contain both fields.
+
+``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)``
+ Specifies the HEVC slice start code expected for each slice.
+ This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE
+ pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE
+ are required to set this control in order to specify the start code
+ that is expected for the buffer.
+ Drivers may expose a single or multiple start codes, depending
+ on what they can support.
+
+ .. note::
+
+ This menu control is not yet part of the public kernel API and
+ it is expected to change.
+
+.. c:type:: v4l2_mpeg_video_hevc_start_code
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE``
+ - 0
+ - Selecting this value specifies that HEVC slices are passed
+ to the driver without any start code.
+ * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B``
+ - 1
+ - Selecting this value specifies that HEVC slices are expected
+ to be prefixed by Annex B start codes. According to :ref:`hevc`
+ valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index 33aff21b7d11..6690928e657b 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -479,6 +479,24 @@ See also the examples in :ref:`control`.
- n/a
- A struct :c:type:`v4l2_ctrl_h264_decode_params`, containing H264
decode parameters for stateless video decoders.
+ * - ``V4L2_CTRL_TYPE_HEVC_SPS``
+ - n/a
+ - n/a
+ - n/a
+ - A struct :c:type:`v4l2_ctrl_hevc_sps`, containing HEVC Sequence
+ Parameter Set for stateless video decoders.
+ * - ``V4L2_CTRL_TYPE_HEVC_PPS``
+ - n/a
+ - n/a
+ - n/a
+ - A struct :c:type:`v4l2_ctrl_hevc_pps`, containing HEVC Picture
+ Parameter Set for stateless video decoders.
+ * - ``V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS``
+ - n/a
+ - n/a
+ - n/a
+ - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC
+ slice parameters for stateless video decoders.
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|