docs: networking: convert ray_cs.txt to ReST

- add SPDX header;
- use copyright symbol;
- add a document title;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 150 deletions

diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt
deleted file mode 100644
index c0c12307ed9d..000000000000
--- a/Documentation/networking/ray_cs.txt
+++ /dev/null
@@ -1,150 +0,0 @@
-September 21, 1999
-
-Copyright (c) 1998  Corey Thomas (corey@world.std.com)
-
-This file is the documentation for the Raylink Wireless LAN card driver for
-Linux.  The Raylink wireless LAN card is a PCMCIA card which provides IEEE
-802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
-See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
-card.  This driver is in early development and does have bugs.  See the known
-bugs and limitations at the end of this document for more information.
-This driver also works with WebGear's Aviator 2.4 and Aviator Pro
-wireless LAN cards.
-
-As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
-source.  My web page for the development of ray_cs is at
-http://web.ralinktech.com/ralink/Home/Support/Linux.html 
-and I can be emailed at corey@world.std.com
-
-The kernel driver is based on ray_cs-1.62.tgz
-
-The driver at my web page is intended to be used as an add on to
-David Hinds pcmcia package.  All the command line parameters are
-available when compiled as a module.  When built into the kernel, only
-the essid= string parameter is available via the kernel command line.
-This will change after the method of sorting out parameters for all
-the PCMCIA drivers is agreed upon.  If you must have a built in driver
-with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
-will find them all.
-
-Information on card services is available at:
-	http://pcmcia-cs.sourceforge.net/
-
-
-Card services user programs are still required for PCMCIA devices.
-pcmcia-cs-3.1.1 or greater is required for the kernel version of
-the driver.
-
-Currently, ray_cs is not part of David Hinds card services package,
-so the following magic is required.
-
-At the end of the /etc/pcmcia/config.opts file, add the line: 
-source ./ray_cs.opts 
-This will make card services read the ray_cs.opts file
-when starting.  Create the file /etc/pcmcia/ray_cs.opts containing the
-following:
-
-#### start of /etc/pcmcia/ray_cs.opts ###################
-# Configuration options for Raylink Wireless LAN PCMCIA card
-device "ray_cs"
-  class "network" module "misc/ray_cs"
-
-card "RayLink PC Card WLAN Adapter"
-  manfid 0x01a6, 0x0000
-  bind "ray_cs"
-
-module "misc/ray_cs" opts ""
-#### end of /etc/pcmcia/ray_cs.opts #####################
-
-
-To join an existing network with
-different parameters, contact the network administrator for the 
-configuration information, and edit /etc/pcmcia/ray_cs.opts.
-Add the parameters below between the empty quotes.
-
-Parameters for ray_cs driver which may be specified in ray_cs.opts:
-
-bc              integer         0 = normal mode (802.11 timing)
-                                1 = slow down inter frame timing to allow
-                                    operation with older breezecom access
-                                    points.
-
-beacon_period	integer         beacon period in Kilo-microseconds
-				legal values = must be integer multiple 
-                                               of hop dwell
-                                default = 256
-
-country         integer         1 = USA (default)
-                                2 = Europe
-                                3 = Japan
-                                4 = Korea
-                                5 = Spain
-                                6 = France
-                                7 = Israel
-                                8 = Australia
-
-essid		string		ESS ID - network name to join
-				string with maximum length of 32 chars
-				default value = "ADHOC_ESSID"
-
-hop_dwell	integer         hop dwell time in Kilo-microseconds 
-				legal values = 16,32,64,128(default),256
-
-irq_mask	integer         linux standard 16 bit value 1bit/IRQ
-				lsb is IRQ 0, bit 1 is IRQ 1 etc.
-				Used to restrict choice of IRQ's to use.
-                                Recommended method for controlling
-                                interrupts is in /etc/pcmcia/config.opts
-
-net_type	integer		0 (default) = adhoc network, 
-				1 = infrastructure
-
-phy_addr	string          string containing new MAC address in
-				hex, must start with x eg
-				x00008f123456
-
-psm		integer         0 = continuously active
-				1 = power save mode (not useful yet)
-
-pc_debug	integer		(0-5) larger values for more verbose
-				logging.  Replaces ray_debug.
-
-ray_debug	integer		Replaced with pc_debug
-
-ray_mem_speed   integer         defaults to 500
-
-sniffer         integer         0 = not sniffer (default)
-                                1 = sniffer which can be used to record all
-                                    network traffic using tcpdump or similar, 
-                                    but no normal network use is allowed.
-
-translate	integer		0 = no translation (encapsulate frames)
-				1 = translation    (RFC1042/802.1)
-
-
-More on sniffer mode:
-
-tcpdump does not understand 802.11 headers, so it can't
-interpret the contents, but it can record to a file.  This is only
-useful for debugging 802.11 lowlevel protocols that are not visible to
-linux.  If you want to watch ftp xfers, or do similar things, you
-don't need to use sniffer mode.  Also, some packet types are never
-sent up by the card, so you will never see them (ack, rts, cts, probe
-etc.)  There is a simple program (showcap) included in the ray_cs
-package which parses the 802.11 headers.
-
-Known Problems and missing features
-
-        Does not work with non x86
-
-	Does not work with SMP
-
-	Support for defragmenting frames is not yet debugged, and in
-	fact is known to not work.  I have never encountered a net set
-	up to fragment, but still, it should be fixed.
-
-	The ioctl support is incomplete.  The hardware address cannot be set
-	using ifconfig yet.  If a different hardware address is needed, it may
-	be set using the phy_addr parameter in ray_cs.opts.  This requires
-	a card insertion to take effect.