Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series has a huge amount of churn because it pulls in Mauro's doc
  update changing all our txt files to rst ones.

  Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
  zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
  some other minor updates.

  The major core change is Hannes moving functions out of the aacraid
  driver and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
  scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
  scsi: ufs: Do not rely on prefetched data
  scsi: dc395x: remove dc395x_bios_param
  scsi: libiscsi: Fix error count for active session
  scsi: hpsa: correct race condition in offload enabled
  scsi: message: fusion: Replace zero-length array with flexible-array member
  scsi: qedi: Add PCI shutdown handler support
  scsi: qedi: Add MFW error recovery process
  scsi: ufs: Enable block layer runtime PM for well-known logical units
  scsi: ufs-qcom: Override devfreq parameters
  scsi: ufshcd: Let vendor override devfreq parameters
  scsi: ufshcd: Update the set frequency to devfreq
  scsi: ufs: Resume ufs host before accessing ufs device
  scsi: ufs-mediatek: customize the delay for enabling host
  scsi: ufs: make HCE polling more compact to improve initialization latency
  scsi: ufs: allow custom delay prior to host enabling
  scsi: ufs-mediatek: use common delay function
  scsi: ufs: introduce common and flexible delay function
  scsi: ufs: use an enum for host capabilities
  scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  ...

1 files changed, 117 insertions, 0 deletions

diff --git a/Documentation/scsi/dc395x.rst b/Documentation/scsi/dc395x.rst
new file mode 100644
index 000000000000..d779e782b1cb
--- /dev/null
+++ b/Documentation/scsi/dc395x.rst
@@ -0,0 +1,117 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+README file for the dc395x SCSI driver
+======================================
+
+Status
+------
+The driver has been tested with CD-R and CD-R/W drives. These should
+be safe to use. Testing with hard disks has not been done to any
+great degree and caution should be exercised if you want to attempt
+to use this driver with hard disks.
+
+This is a 2.5 only driver. For a 2.4 driver please see the original
+driver (which this driver started from) at
+http://www.garloff.de/kurt/linux/dc395/
+
+Problems, questions and patches should be submitted to the mailing
+list. Details on the list, including archives, are available at
+http://lists.twibble.org/mailman/listinfo/dc395x/
+
+Parameters
+----------
+The driver uses the settings from the EEPROM set in the SCSI BIOS
+setup. If there is no EEPROM, the driver uses default values.
+Both can be overridden by command line parameters (module or kernel
+parameters).
+
+The following parameters are available:
+
+safe
+   Default: 0, Acceptable values: 0 or 1
+
+   If safe is set to 1 then the adapter will use conservative
+   ("safe") default settings. This sets:
+
+		shortcut for dc395x=7,4,9,15,2,10
+
+adapter_id
+   Default: 7, Acceptable values: 0 to 15
+
+   Sets the host adapter SCSI ID.
+
+max_speed
+   Default: 1, Acceptable value: 0 to 7
+
+   ==  ========
+   0   20   Mhz
+   1   12.2 Mhz
+   2   10   Mhz
+   3   8    Mhz
+   4   6.7  Mhz
+   5   5.8  Hhz
+   6   5    Mhz
+   7   4    Mhz
+   ==  ========
+
+dev_mode
+   Bitmap for device configuration
+
+   DevMode bit definition:
+
+      === ======== ========  =========================================
+      Bit Val(hex) Val(dec)  Meaning
+      === ======== ========  =========================================
+       0    0x01       1     Parity check
+       1    0x02       2     Synchronous Negotiation
+       2    0x04       4     Disconnection
+       3    0x08       8     Send Start command on startup. (Not used)
+       4    0x10      16     Tagged Command Queueing
+       5    0x20      32     Wide Negotiation
+      === ======== ========  =========================================
+
+adapter_mode
+   Bitmap for adapter configuration
+
+   AdaptMode bit definition
+
+    ===== ======== ========  ====================================================
+      Bit Val(hex) Val(dec)  Meaning
+    ===== ======== ========  ====================================================
+       0    0x01       1     Support more than two drives. (Not used)
+       1    0x02       2     Use DOS compatible mapping for HDs greater than 1GB.
+       2    0x04       4     Reset SCSI Bus on startup.
+       3    0x08       8     Active Negation: Improves SCSI Bus noise immunity.
+       4    0x10      16     Immediate return on BIOS seek command. (Not used)
+    (*)5    0x20      32     Check for LUNs >= 1.
+    ===== ======== ========  ====================================================
+
+tags
+   Default: 3, Acceptable values: 0-5
+
+   The number of tags is 1<<x, if x has been specified
+
+reset_delay
+   Default: 1, Acceptable values: 0-180
+
+   The seconds to not accept commands after a SCSI Reset
+
+
+For the built  in driver the parameters should be prefixed with
+dc395x. (eg "dc395x.safe=1")
+
+
+Copyright
+---------
+The driver is free software. It is protected by the GNU General Public
+License (GPL). Please read it, before using this driver. It should be
+included in your kernel sources and with your distribution. It carries the
+filename COPYING. If you don't have it, please ask me to send you one by
+email.
+
+Note: The GNU GPL says also something about warranty and liability.
+Please be aware the following: While we do my best to provide a working and
+reliable driver, there is a chance, that it will kill your valuable data.
+We refuse to take any responsibility for that. The driver is provided as-is
+and YOU USE IT AT YOUR OWN RESPONSIBILITY.