ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master

Use for struct pxa2xx_spi_master clock_enable field was removed years ago
from the pxa2xx-spi driver by the commit 2f1a74e5a2de ("[ARM] pxa: make
pxa2xx_spi driver use ssp_request()/ssp_free()").

Therefore remove it from structure definition, documentation and from
couple affected board files.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

1 files changed, 0 insertions, 6 deletions

diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 3352f97430e4..13a0b7fb192f 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -22,15 +22,10 @@ Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 found in include/linux/spi/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
-	u32 clock_enable;
 	u16 num_chipselect;
 	u8 enable_dma;
 };
 
-The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
-corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
-the "PXA2xx Developer Manual" section "Clocks and Power Management".
-
 The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
 slave device (chips) attached to this SPI master.
 
@@ -57,7 +52,6 @@ static struct resource pxa_spi_nssp_resources[] = {
 };
 
 static struct pxa2xx_spi_master pxa_nssp_master_info = {
-	.clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
 	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
 	.enable_dma = 1, /* Enables NSSP DMA */
 };