diff options
author | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-06-12 19:52:59 +0200 |
---|---|---|
committer | Jonathan Corbet <corbet@lwn.net> | 2019-06-14 22:31:36 +0200 |
commit | 4ca9bc225e46eb7bc040dd948be7cb68975d80d3 (patch) | |
tree | 9da0a501a84850b63ff00a4c5ba5a578a1b17fd5 /Documentation/target/tcmu-design.rst | |
parent | docs: riscv: convert docs to ReST and rename to *.rst (diff) | |
download | linux-4ca9bc225e46eb7bc040dd948be7cb68975d80d3.tar.xz linux-4ca9bc225e46eb7bc040dd948be7cb68975d80d3.zip |
docs: target: convert docs to ReST and rename to *.rst
Convert the TCM docs to ReST format and add them to the
bookset.
This has a mix of userspace-faced and Kernelspace faced
docs. Still, it sounds a better candidate to be added at
the kernel API set of docs.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/target/tcmu-design.rst')
-rw-r--r-- | Documentation/target/tcmu-design.rst | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/Documentation/target/tcmu-design.rst b/Documentation/target/tcmu-design.rst new file mode 100644 index 000000000000..a7b426707bf6 --- /dev/null +++ b/Documentation/target/tcmu-design.rst @@ -0,0 +1,405 @@ +==================== +TCM Userspace Design +==================== + + +.. Contents: + + 1) TCM Userspace Design + a) Background + b) Benefits + c) Design constraints + d) Implementation overview + i. Mailbox + ii. Command ring + iii. Data Area + e) Device discovery + f) Device events + g) Other contingencies + 2) Writing a user pass-through handler + a) Discovering and configuring TCMU uio devices + b) Waiting for events on the device(s) + c) Managing the command ring + 3) A final note + + +TCM Userspace Design +==================== + +TCM is another name for LIO, an in-kernel iSCSI target (server). +Existing TCM targets run in the kernel. TCMU (TCM in Userspace) +allows userspace programs to be written which act as iSCSI targets. +This document describes the design. + +The existing kernel provides modules for different SCSI transport +protocols. TCM also modularizes the data storage. There are existing +modules for file, block device, RAM or using another SCSI device as +storage. These are called "backstores" or "storage engines". These +built-in modules are implemented entirely as kernel code. + +Background +---------- + +In addition to modularizing the transport protocol used for carrying +SCSI commands ("fabrics"), the Linux kernel target, LIO, also modularizes +the actual data storage as well. These are referred to as "backstores" +or "storage engines". The target comes with backstores that allow a +file, a block device, RAM, or another SCSI device to be used for the +local storage needed for the exported SCSI LUN. Like the rest of LIO, +these are implemented entirely as kernel code. + +These backstores cover the most common use cases, but not all. One new +use case that other non-kernel target solutions, such as tgt, are able +to support is using Gluster's GLFS or Ceph's RBD as a backstore. The +target then serves as a translator, allowing initiators to store data +in these non-traditional networked storage systems, while still only +using standard protocols themselves. + +If the target is a userspace process, supporting these is easy. tgt, +for example, needs only a small adapter module for each, because the +modules just use the available userspace libraries for RBD and GLFS. + +Adding support for these backstores in LIO is considerably more +difficult, because LIO is entirely kernel code. Instead of undertaking +the significant work to port the GLFS or RBD APIs and protocols to the +kernel, another approach is to create a userspace pass-through +backstore for LIO, "TCMU". + + +Benefits +-------- + +In addition to allowing relatively easy support for RBD and GLFS, TCMU +will also allow easier development of new backstores. TCMU combines +with the LIO loopback fabric to become something similar to FUSE +(Filesystem in Userspace), but at the SCSI layer instead of the +filesystem layer. A SUSE, if you will. + +The disadvantage is there are more distinct components to configure, and +potentially to malfunction. This is unavoidable, but hopefully not +fatal if we're careful to keep things as simple as possible. + +Design constraints +------------------ + +- Good performance: high throughput, low latency +- Cleanly handle if userspace: + + 1) never attaches + 2) hangs + 3) dies + 4) misbehaves + +- Allow future flexibility in user & kernel implementations +- Be reasonably memory-efficient +- Simple to configure & run +- Simple to write a userspace backend + + +Implementation overview +----------------------- + +The core of the TCMU interface is a memory region that is shared +between kernel and userspace. Within this region is: a control area +(mailbox); a lockless producer/consumer circular buffer for commands +to be passed up, and status returned; and an in/out data buffer area. + +TCMU uses the pre-existing UIO subsystem. UIO allows device driver +development in userspace, and this is conceptually very close to the +TCMU use case, except instead of a physical device, TCMU implements a +memory-mapped layout designed for SCSI commands. Using UIO also +benefits TCMU by handling device introspection (e.g. a way for +userspace to determine how large the shared region is) and signaling +mechanisms in both directions. + +There are no embedded pointers in the memory region. Everything is +expressed as an offset from the region's starting address. This allows +the ring to still work if the user process dies and is restarted with +the region mapped at a different virtual address. + +See target_core_user.h for the struct definitions. + +The Mailbox +----------- + +The mailbox is always at the start of the shared memory region, and +contains a version, details about the starting offset and size of the +command ring, and head and tail pointers to be used by the kernel and +userspace (respectively) to put commands on the ring, and indicate +when the commands are completed. + +version - 1 (userspace should abort if otherwise) + +flags: + - TCMU_MAILBOX_FLAG_CAP_OOOC: + indicates out-of-order completion is supported. + See "The Command Ring" for details. + +cmdr_off + The offset of the start of the command ring from the start + of the memory region, to account for the mailbox size. +cmdr_size + The size of the command ring. This does *not* need to be a + power of two. +cmd_head + Modified by the kernel to indicate when a command has been + placed on the ring. +cmd_tail + Modified by userspace to indicate when it has completed + processing of a command. + +The Command Ring +---------------- + +Commands are placed on the ring by the kernel incrementing +mailbox.cmd_head by the size of the command, modulo cmdr_size, and +then signaling userspace via uio_event_notify(). Once the command is +completed, userspace updates mailbox.cmd_tail in the same way and +signals the kernel via a 4-byte write(). When cmd_head equals +cmd_tail, the ring is empty -- no commands are currently waiting to be +processed by userspace. + +TCMU commands are 8-byte aligned. They start with a common header +containing "len_op", a 32-bit value that stores the length, as well as +the opcode in the lowest unused bits. It also contains cmd_id and +flags fields for setting by the kernel (kflags) and userspace +(uflags). + +Currently only two opcodes are defined, TCMU_OP_CMD and TCMU_OP_PAD. + +When the opcode is CMD, the entry in the command ring is a struct +tcmu_cmd_entry. Userspace finds the SCSI CDB (Command Data Block) via +tcmu_cmd_entry.req.cdb_off. This is an offset from the start of the +overall shared memory region, not the entry. The data in/out buffers +are accessible via tht req.iov[] array. iov_cnt contains the number of +entries in iov[] needed to describe either the Data-In or Data-Out +buffers. For bidirectional commands, iov_cnt specifies how many iovec +entries cover the Data-Out area, and iov_bidi_cnt specifies how many +iovec entries immediately after that in iov[] cover the Data-In +area. Just like other fields, iov.iov_base is an offset from the start +of the region. + +When completing a command, userspace sets rsp.scsi_status, and +rsp.sense_buffer if necessary. Userspace then increments +mailbox.cmd_tail by entry.hdr.length (mod cmdr_size) and signals the +kernel via the UIO method, a 4-byte write to the file descriptor. + +If TCMU_MAILBOX_FLAG_CAP_OOOC is set for mailbox->flags, kernel is +capable of handling out-of-order completions. In this case, userspace can +handle command in different order other than original. Since kernel would +still process the commands in the same order it appeared in the command +ring, userspace need to update the cmd->id when completing the +command(a.k.a steal the original command's entry). + +When the opcode is PAD, userspace only updates cmd_tail as above -- +it's a no-op. (The kernel inserts PAD entries to ensure each CMD entry +is contiguous within the command ring.) + +More opcodes may be added in the future. If userspace encounters an +opcode it does not handle, it must set UNKNOWN_OP bit (bit 0) in +hdr.uflags, update cmd_tail, and proceed with processing additional +commands, if any. + +The Data Area +------------- + +This is shared-memory space after the command ring. The organization +of this area is not defined in the TCMU interface, and userspace +should access only the parts referenced by pending iovs. + + +Device Discovery +---------------- + +Other devices may be using UIO besides TCMU. Unrelated user processes +may also be handling different sets of TCMU devices. TCMU userspace +processes must find their devices by scanning sysfs +class/uio/uio*/name. For TCMU devices, these names will be of the +format:: + + tcm-user/<hba_num>/<device_name>/<subtype>/<path> + +where "tcm-user" is common for all TCMU-backed UIO devices. <hba_num> +and <device_name> allow userspace to find the device's path in the +kernel target's configfs tree. Assuming the usual mount point, it is +found at:: + + /sys/kernel/config/target/core/user_<hba_num>/<device_name> + +This location contains attributes such as "hw_block_size", that +userspace needs to know for correct operation. + +<subtype> will be a userspace-process-unique string to identify the +TCMU device as expecting to be backed by a certain handler, and <path> +will be an additional handler-specific string for the user process to +configure the device, if needed. The name cannot contain ':', due to +LIO limitations. + +For all devices so discovered, the user handler opens /dev/uioX and +calls mmap():: + + mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0) + +where size must be equal to the value read from +/sys/class/uio/uioX/maps/map0/size. + + +Device Events +------------- + +If a new device is added or removed, a notification will be broadcast +over netlink, using a generic netlink family name of "TCM-USER" and a +multicast group named "config". This will include the UIO name as +described in the previous section, as well as the UIO minor +number. This should allow userspace to identify both the UIO device and +the LIO device, so that after determining the device is supported +(based on subtype) it can take the appropriate action. + + +Other contingencies +------------------- + +Userspace handler process never attaches: + +- TCMU will post commands, and then abort them after a timeout period + (30 seconds.) + +Userspace handler process is killed: + +- It is still possible to restart and re-connect to TCMU + devices. Command ring is preserved. However, after the timeout period, + the kernel will abort pending tasks. + +Userspace handler process hangs: + +- The kernel will abort pending tasks after a timeout period. + +Userspace handler process is malicious: + +- The process can trivially break the handling of devices it controls, + but should not be able to access kernel memory outside its shared + memory areas. + + +Writing a user pass-through handler (with example code) +======================================================= + +A user process handing a TCMU device must support the following: + +a) Discovering and configuring TCMU uio devices +b) Waiting for events on the device(s) +c) Managing the command ring: Parsing operations and commands, + performing work as needed, setting response fields (scsi_status and + possibly sense_buffer), updating cmd_tail, and notifying the kernel + that work has been finished + +First, consider instead writing a plugin for tcmu-runner. tcmu-runner +implements all of this, and provides a higher-level API for plugin +authors. + +TCMU is designed so that multiple unrelated processes can manage TCMU +devices separately. All handlers should make sure to only open their +devices, based opon a known subtype string. + +a) Discovering and configuring TCMU UIO devices:: + + /* error checking omitted for brevity */ + + int fd, dev_fd; + char buf[256]; + unsigned long long map_len; + void *map; + + fd = open("/sys/class/uio/uio0/name", O_RDONLY); + ret = read(fd, buf, sizeof(buf)); + close(fd); + buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + + /* we only want uio devices whose name is a format we expect */ + if (strncmp(buf, "tcm-user", 8)) + exit(-1); + + /* Further checking for subtype also needed here */ + + fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY); + ret = read(fd, buf, sizeof(buf)); + close(fd); + str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + + map_len = strtoull(buf, NULL, 0); + + dev_fd = open("/dev/uio0", O_RDWR); + map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0); + + + b) Waiting for events on the device(s) + + while (1) { + char buf[4]; + + int ret = read(dev_fd, buf, 4); /* will block */ + + handle_device_events(dev_fd, map); + } + + +c) Managing the command ring:: + + #include <linux/target_core_user.h> + + int handle_device_events(int fd, void *map) + { + struct tcmu_mailbox *mb = map; + struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + int did_some_work = 0; + + /* Process events from cmd ring until we catch up with cmd_head */ + while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) { + + if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) { + uint8_t *cdb = (void *)mb + ent->req.cdb_off; + bool success = true; + + /* Handle command here. */ + printf("SCSI opcode: 0x%x\n", cdb[0]); + + /* Set response fields */ + if (success) + ent->rsp.scsi_status = SCSI_NO_SENSE; + else { + /* Also fill in rsp->sense_buffer here */ + ent->rsp.scsi_status = SCSI_CHECK_CONDITION; + } + } + else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) { + /* Tell the kernel we didn't handle unknown opcodes */ + ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP; + } + else { + /* Do nothing for PAD entries except update cmd_tail */ + } + + /* update cmd_tail */ + mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size; + ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + did_some_work = 1; + } + + /* Notify the kernel that work has been finished */ + if (did_some_work) { + uint32_t buf = 0; + + write(fd, &buf, 4); + } + + return 0; + } + + +A final note +============ + +Please be careful to return codes as defined by the SCSI +specifications. These are different than some values defined in the +scsi/scsi.h include file. For example, CHECK CONDITION's status code +is 2, not 1. |