HID: Move hiddev.txt to the new Documentation/hid directory

With the new Documentation/hid directory, it makes sense to have
hiddev.txt here as well.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

1 files changed, 0 insertions, 205 deletions

diff --git a/Documentation/usb/hiddev.txt b/Documentation/usb/hiddev.txt
deleted file mode 100644
index 6e8c9f1d2f22..000000000000
--- a/Documentation/usb/hiddev.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-Care and feeding of your Human Interface Devices
-
-INTRODUCTION
-
-In addition to the normal input type HID devices, USB also uses the
-human interface device protocols for things that are not really human
-interfaces, but have similar sorts of communication needs. The two big
-examples for this are power devices (especially uninterruptable power
-supplies) and monitor control on higher end monitors.
-
-To support these disparate requirements, the Linux USB system provides
-HID events to two separate interfaces:
-* the input subsystem, which converts HID events into normal input
-device interfaces (such as keyboard, mouse and joystick) and a
-normalised event interface - see Documentation/input/input.txt
-* the hiddev interface, which provides fairly raw HID events
-
-The data flow for a HID event produced by a device is something like
-the following :
-
- usb.c ---> hid-core.c  ----> hid-input.c ----> [keyboard/mouse/joystick/event]
-                         |
-                         |
-                          --> hiddev.c ----> POWER / MONITOR CONTROL 
-
-In addition, other subsystems (apart from USB) can potentially feed
-events into the input subsystem, but these have no effect on the hid
-device interface.
-
-USING THE HID DEVICE INTERFACE
-
-The hiddev interface is a char interface using the normal USB major,
-with the minor numbers starting at 96 and finishing at 111. Therefore,
-you need the following commands:
-mknod /dev/usb/hiddev0 c 180 96
-mknod /dev/usb/hiddev1 c 180 97
-mknod /dev/usb/hiddev2 c 180 98
-mknod /dev/usb/hiddev3 c 180 99
-mknod /dev/usb/hiddev4 c 180 100
-mknod /dev/usb/hiddev5 c 180 101
-mknod /dev/usb/hiddev6 c 180 102
-mknod /dev/usb/hiddev7 c 180 103
-mknod /dev/usb/hiddev8 c 180 104
-mknod /dev/usb/hiddev9 c 180 105
-mknod /dev/usb/hiddev10 c 180 106
-mknod /dev/usb/hiddev11 c 180 107
-mknod /dev/usb/hiddev12 c 180 108
-mknod /dev/usb/hiddev13 c 180 109
-mknod /dev/usb/hiddev14 c 180 110
-mknod /dev/usb/hiddev15 c 180 111
-
-So you point your hiddev compliant user-space program at the correct
-interface for your device, and it all just works.
-
-Assuming that you have a hiddev compliant user-space program, of
-course. If you need to write one, read on.
-
-
-THE HIDDEV API
-This description should be read in conjunction with the HID
-specification, freely available from http://www.usb.org, and
-conveniently linked of http://www.linux-usb.org.
-
-The hiddev API uses a read() interface, and a set of ioctl() calls.
-
-HID devices exchange data with the host computer using data
-bundles called "reports".  Each report is divided into "fields",
-each of which can have one or more "usages".  In the hid-core,
-each one of these usages has a single signed 32 bit value.
-
-read():
-This is the event interface.  When the HID device's state changes,
-it performs an interrupt transfer containing a report which contains
-the changed value.  The hid-core.c module parses the report, and
-returns to hiddev.c the individual usages that have changed within
-the report.  In its basic mode, the hiddev will make these individual
-usage changes available to the reader using a struct hiddev_event:
-
-       struct hiddev_event {
-           unsigned hid;
-           signed int value;
-       };
-
-containing the HID usage identifier for the status that changed, and
-the value that it was changed to. Note that the structure is defined
-within <linux/hiddev.h>, along with some other useful #defines and
-structures.  The HID usage identifier is a composite of the HID usage
-page shifted to the 16 high order bits ORed with the usage code.  The
-behavior of the read() function can be modified using the HIDIOCSFLAG
-ioctl() described below.
-
-
-ioctl(): 
-This is the control interface. There are a number of controls: 
-
-HIDIOCGVERSION - int (read)
-Gets the version code out of the hiddev driver.
-
-HIDIOCAPPLICATION - (none)
-This ioctl call returns the HID application usage associated with the
-hid device. The third argument to ioctl() specifies which application
-index to get. This is useful when the device has more than one
-application collection. If the index is invalid (greater or equal to
-the number of application collections this device has) the ioctl
-returns -1. You can find out beforehand how many application
-collections the device has from the num_applications field from the
-hiddev_devinfo structure. 
-
-HIDIOCGCOLLECTIONINFO - struct hiddev_collection_info (read/write)
-This returns a superset of the information above, providing not only
-application collections, but all the collections the device has.  It
-also returns the level the collection lives in the hierarchy.
-The user passes in a hiddev_collection_info struct with the index 
-field set to the index that should be returned.  The ioctl fills in 
-the other fields.  If the index is larger than the last collection 
-index, the ioctl returns -1 and sets errno to -EINVAL.
-
-HIDIOCGDEVINFO - struct hiddev_devinfo (read)
-Gets a hiddev_devinfo structure which describes the device.
-
-HIDIOCGSTRING - struct hiddev_string_descriptor (read/write)
-Gets a string descriptor from the device. The caller must fill in the
-"index" field to indicate which descriptor should be returned.
-
-HIDIOCINITREPORT - (none)
-Instructs the kernel to retrieve all input and feature report values
-from the device. At this point, all the usage structures will contain
-current values for the device, and will maintain it as the device
-changes.  Note that the use of this ioctl is unnecessary in general,
-since later kernels automatically initialize the reports from the
-device at attach time.
-
-HIDIOCGNAME - string (variable length)
-Gets the device name
-
-HIDIOCGREPORT - struct hiddev_report_info (write)
-Instructs the kernel to get a feature or input report from the device,
-in order to selectively update the usage structures (in contrast to
-INITREPORT).
-
-HIDIOCSREPORT - struct hiddev_report_info (write)
-Instructs the kernel to send a report to the device. This report can
-be filled in by the user through HIDIOCSUSAGE calls (below) to fill in
-individual usage values in the report before sending the report in full
-to the device. 
-
-HIDIOCGREPORTINFO - struct hiddev_report_info (read/write)
-Fills in a hiddev_report_info structure for the user. The report is
-looked up by type (input, output or feature) and id, so these fields
-must be filled in by the user. The ID can be absolute -- the actual
-report id as reported by the device -- or relative --
-HID_REPORT_ID_FIRST for the first report, and (HID_REPORT_ID_NEXT |
-report_id) for the next report after report_id. Without a-priori
-information about report ids, the right way to use this ioctl is to
-use the relative IDs above to enumerate the valid IDs. The ioctl
-returns non-zero when there is no more next ID. The real report ID is
-filled into the returned hiddev_report_info structure. 
-
-HIDIOCGFIELDINFO - struct hiddev_field_info (read/write)
-Returns the field information associated with a report in a
-hiddev_field_info structure. The user must fill in report_id and
-report_type in this structure, as above. The field_index should also
-be filled in, which should be a number from 0 and maxfield-1, as
-returned from a previous HIDIOCGREPORTINFO call. 
-
-HIDIOCGUCODE - struct hiddev_usage_ref (read/write)
-Returns the usage_code in a hiddev_usage_ref structure, given that
-given its report type, report id, field index, and index within the
-field have already been filled into the structure.
-
-HIDIOCGUSAGE - struct hiddev_usage_ref (read/write)
-Returns the value of a usage in a hiddev_usage_ref structure. The
-usage to be retrieved can be specified as above, or the user can
-choose to fill in the report_type field and specify the report_id as
-HID_REPORT_ID_UNKNOWN. In this case, the hiddev_usage_ref will be
-filled in with the report and field information associated with this
-usage if it is found. 
-
-HIDIOCSUSAGE - struct hiddev_usage_ref (write)
-Sets the value of a usage in an output report.  The user fills in
-the hiddev_usage_ref structure as above, but additionally fills in
-the value field.
-
-HIDIOGCOLLECTIONINDEX - struct hiddev_usage_ref (write)
-Returns the collection index associated with this usage.  This
-indicates where in the collection hierarchy this usage sits.
-
-HIDIOCGFLAG - int (read)
-HIDIOCSFLAG - int (write)
-These operations respectively inspect and replace the mode flags
-that influence the read() call above.  The flags are as follows:
-
-    HIDDEV_FLAG_UREF - read() calls will now return 
-        struct hiddev_usage_ref instead of struct hiddev_event.
-        This is a larger structure, but in situations where the
-        device has more than one usage in its reports with the
-        same usage code, this mode serves to resolve such
-        ambiguity.
-
-    HIDDEV_FLAG_REPORT - This flag can only be used in conjunction
-        with HIDDEV_FLAG_UREF.  With this flag set, when the device
-        sends a report, a struct hiddev_usage_ref will be returned
-        to read() filled in with the report_type and report_id, but 
-        with field_index set to FIELD_INDEX_NONE.  This serves as
-        additional notification when the device has sent a report.