V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux

- Move documentation for usb v4l devices from
  Documentation/usb to Documentation/video4linux.
- Removed trailing whitespace.
- Update Kconfig help text links to reflect the new file locations.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

8 files changed, 0 insertions, 2269 deletions

diff --git a/Documentation/usb/et61x251.txt b/Documentation/usb/et61x251.txt
deleted file mode 100644
index 29340282ab5f..000000000000
--- a/Documentation/usb/et61x251.txt
+++ /dev/null
@@ -1,314 +0,0 @@
-
-                       ET61X[12]51 PC Camera Controllers
-                                Driver for Linux
-                       =================================
-
-                               - Documentation -
-
-
-Index
-=====
-1.  Copyright
-2.  Disclaimer
-3.  License
-4.  Overview and features
-5.  Module dependencies
-6.  Module loading
-7.  Module parameters
-8.  Optional device control through "sysfs"
-9.  Supported devices
-10. Notes for V4L2 application developers
-11. Contact information
-
-
-1. Copyright
-============
-Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
-
-
-2. Disclaimer
-=============
-Etoms is a trademark of Etoms Electronics Corp.
-This software is not developed or sponsored by Etoms Electronics.
-
-
-3. License
-==========
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-
-4. Overview and features
-========================
-This driver supports the video interface of the devices mounting the ET61X151
-or ET61X251 PC Camera Controllers.
-
-It's worth to note that Etoms Electronics has never collaborated with the
-author during the development of this project; despite several requests,
-Etoms Electronics also refused to release enough detailed specifications of
-the video compression engine.
-
-The driver relies on the Video4Linux2 and USB core modules. It has been
-designed to run properly on SMP systems as well.
-
-The latest version of the ET61X[12]51 driver can be found at the following URL:
-http://www.linux-projects.org/
-
-Some of the features of the driver are:
-
-- full compliance with the Video4Linux2 API (see also "Notes for V4L2
-  application developers" paragraph);
-- available mmap or read/poll methods for video streaming through isochronous
-  data transfers;
-- automatic detection of image sensor;
-- support for any window resolutions and optional panning within the maximum
-  pixel area of image sensor;
-- image downscaling with arbitrary scaling factors from 1 and 2 in both
-  directions (see "Notes for V4L2 application developers" paragraph);
-- two different video formats for uncompressed or compressed data in low or
-  high compression quality (see also "Notes for V4L2 application developers"
-  paragraph);
-- full support for the capabilities of every possible image sensors that can
-  be connected to the ET61X[12]51 bridges, including, for istance, red, green,
-  blue and global gain adjustments and exposure control (see "Supported
-  devices" paragraph for details);
-- use of default color settings for sunlight conditions;
-- dynamic I/O interface for both ET61X[12]51 and image sensor control (see
-  "Optional device control through 'sysfs'" paragraph);
-- dynamic driver control thanks to various module parameters (see "Module
-  parameters" paragraph);
-- up to 64 cameras can be handled at the same time; they can be connected and
-  disconnected from the host many times without turning off the computer, if
-  the system supports hotplugging;
-- no known bugs.
-
-
-5. Module dependencies
-======================
-For it to work properly, the driver needs kernel support for Video4Linux and
-USB.
-
-The following options of the kernel configuration file must be enabled and
-corresponding modules must be compiled:
-
-	# Multimedia devices
-	#
-	CONFIG_VIDEO_DEV=m
-
-To enable advanced debugging functionality on the device through /sysfs:
-
-	# Multimedia devices
-	#
-	CONFIG_VIDEO_ADV_DEBUG=y
-
-	# USB support
-	#
-	CONFIG_USB=m
-
-In addition, depending on the hardware being used, the modules below are
-necessary:
-
-	# USB Host Controller Drivers
-	#
-	CONFIG_USB_EHCI_HCD=m
-	CONFIG_USB_UHCI_HCD=m
-	CONFIG_USB_OHCI_HCD=m
-
-And finally:
-
-	# USB Multimedia devices
-	#
-	CONFIG_USB_ET61X251=m
-
-
-6. Module loading
-=================
-To use the driver, it is necessary to load the "et61x251" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
-
-Loading can be done as shown below:
-
-	[root@localhost home]# modprobe et61x251
-
-At this point the devices should be recognized. You can invoke "dmesg" to
-analyze kernel messages and verify that the loading process has gone well:
-
-	[user@localhost home]$ dmesg
-
-
-7. Module parameters
-====================
-Module parameters are listed below:
--------------------------------------------------------------------------------
-Name:           video_nr
-Type:           short array (min = 0, max = 64)
-Syntax:         <-1|n[,...]>
-Description:    Specify V4L2 minor mode number:
-                -1 = use next available
-                 n = use minor number n
-                You can specify up to 64 cameras this way.
-                For example:
-                video_nr=-1,2,-1 would assign minor number 2 to the second
-                registered camera and use auto for the first one and for every
-                other camera.
-Default:        -1
--------------------------------------------------------------------------------
-Name:           force_munmap
-Type:           bool array (min = 0, max = 64)
-Syntax:         <0|1[,...]>
-Description:    Force the application to unmap previously mapped buffer memory
-                before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
-                all the applications support this feature. This parameter is
-                specific for each detected camera.
-                0 = do not force memory unmapping
-                1 = force memory unmapping (save memory)
-Default:        0
--------------------------------------------------------------------------------
-Name:           frame_timeout
-Type:           uint array (min = 0, max = 64)
-Syntax:         <n[,...]>
-Description:    Timeout for a video frame in seconds. This parameter is
-                specific for each detected camera. This parameter can be
-                changed at runtime thanks to the /sys filesystem interface.
-Default:        2
--------------------------------------------------------------------------------
-Name:           debug
-Type:           ushort
-Syntax:         <n>
-Description:    Debugging information level, from 0 to 3:
-                0 = none (use carefully)
-                1 = critical errors
-                2 = significant informations
-                3 = more verbose messages
-                Level 3 is useful for testing only, when only one device
-                is used at the same time. It also shows some more informations
-                about the hardware being detected. This module parameter can be
-                changed at runtime thanks to the /sys filesystem interface.
-Default:        2
--------------------------------------------------------------------------------
-
-
-8. Optional device control through "sysfs"
-==========================================
-If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
-it is possible to read and write both the ET61X[12]51 and the image sensor
-registers by using the "sysfs" filesystem interface.
-
-There are four files in the /sys/class/video4linux/videoX directory for each
-registered camera: "reg", "val", "i2c_reg" and "i2c_val". The first two files
-control the ET61X[12]51 bridge, while the other two control the sensor chip.
-"reg" and "i2c_reg" hold the values of the current register index where the
-following reading/writing operations are addressed at through "val" and
-"i2c_val". Their use is not intended for end-users, unless you know what you
-are doing. Remember that you must be logged in as root before writing to them.
-
-As an example, suppose we were to want to read the value contained in the
-register number 1 of the sensor register table - which is usually the product
-identifier - of the camera registered as "/dev/video0":
-
-	[root@localhost #] cd /sys/class/video4linux/video0
-	[root@localhost #] echo 1 > i2c_reg
-	[root@localhost #] cat i2c_val
-
-Note that if the sensor registers can not be read, "cat" will fail.
-To avoid race conditions, all the I/O accesses to the files are serialized.
-
-
-9. Supported devices
-====================
-None of the names of the companies as well as their products will be mentioned
-here. They have never collaborated with the author, so no advertising.
-
-From the point of view of a driver, what unambiguously identify a device are
-its vendor and product USB identifiers. Below is a list of known identifiers of
-devices mounting the ET61X[12]51 PC camera controllers:
-
-Vendor ID  Product ID
----------  ----------
-0x102c     0x6151
-0x102c     0x6251
-0x102c     0x6253
-0x102c     0x6254
-0x102c     0x6255
-0x102c     0x6256
-0x102c     0x6257
-0x102c     0x6258
-0x102c     0x6259
-0x102c     0x625a
-0x102c     0x625b
-0x102c     0x625c
-0x102c     0x625d
-0x102c     0x625e
-0x102c     0x625f
-0x102c     0x6260
-0x102c     0x6261
-0x102c     0x6262
-0x102c     0x6263
-0x102c     0x6264
-0x102c     0x6265
-0x102c     0x6266
-0x102c     0x6267
-0x102c     0x6268
-0x102c     0x6269
-
-The following image sensors are supported:
-
-Model       Manufacturer
------       ------------
-TAS5130D1B  Taiwan Advanced Sensor Corporation
-
-All the available control settings of each image sensor are supported through
-the V4L2 interface.
-
-
-10. Notes for V4L2 application developers
-=========================================
-This driver follows the V4L2 API specifications. In particular, it enforces two
-rules:
-
-- exactly one I/O method, either "mmap" or "read", is associated with each
-file descriptor. Once it is selected, the application must close and reopen the
-device to switch to the other I/O method;
-
-- although it is not mandatory, previously mapped buffer memory should always
-be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
-The same number of buffers as before will be allocated again to match the size
-of the new video frames, so you have to map the buffers again before any I/O
-attempts on them.
-
-Consistently with the hardware limits, this driver also supports image
-downscaling with arbitrary scaling factors from 1 and 2 in both directions.
-However, the V4L2 API specifications don't correctly define how the scaling
-factor can be chosen arbitrarily by the "negotiation" of the "source" and
-"target" rectangles. To work around this flaw, we have added the convention
-that, during the negotiation, whenever the "VIDIOC_S_CROP" ioctl is issued, the
-scaling factor is restored to 1.
-
-This driver supports two different video formats: the first one is the "8-bit
-Sequential Bayer" format and can be used to obtain uncompressed video data
-from the device through the current I/O method, while the second one provides
-"raw" compressed video data (without frame headers not related to the
-compressed data). The current compression quality may vary from 0 to 1 and can
-be selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP
-V4L2 ioctl's.
-
-
-11. Contact information
-=======================
-The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
-
-GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
-'FCE635A4'; the public 1024-bit key should be available at any keyserver;
-the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
diff --git a/Documentation/usb/ibmcam.txt b/Documentation/usb/ibmcam.txt
deleted file mode 100644
index c25003644131..000000000000
--- a/Documentation/usb/ibmcam.txt
+++ /dev/null
@@ -1,324 +0,0 @@
-README for Linux device driver for the IBM "C-It" USB video camera
-
-INTRODUCTION:
-
-This driver does not use all features known to exist in
-the IBM camera. However most of needed features work well.
-
-This driver was developed using logs of observed USB traffic
-which was produced by standard Windows driver (c-it98.sys).
-I did not have data sheets from Xirlink.
-
-Video formats:
-      128x96  [model 1]
-      176x144
-      320x240 [model 2]
-      352x240 [model 2]
-      352x288
-Frame rate: 3 - 30 frames per second (FPS)
-External interface: USB
-Internal interface: Video For Linux (V4L)
-Supported controls:
-- by V4L: Contrast,  Brightness, Color, Hue
-- by driver options: frame rate, lighting conditions, video format,
-                     default picture settings, sharpness.
-
-SUPPORTED CAMERAS:
-
-Xirlink "C-It" camera, also known as "IBM PC Camera".
-The device uses proprietary ASIC (and compression method);
-it is manufactured by Xirlink. See http://www.xirlink.com/
-(renamed to http://www.veo.com), http://www.ibmpccamera.com,
-or http://www.c-itnow.com/ for details and pictures.
-
-This very chipset ("X Chip", as marked at the factory)
-is used in several other cameras, and they are supported
-as well:
-
-- IBM NetCamera
-- Veo Stingray
-
-The Linux driver was developed with camera with following
-model number (or FCC ID): KSX-XVP510. This camera has three
-interfaces, each with one endpoint (control, iso, iso). This
-type of cameras is referred to as "model 1". These cameras are
-no longer manufactured.
-
-Xirlink now manufactures new cameras which are somewhat different.
-In particular, following models [FCC ID] belong to that category:
-
-XVP300 [KSX-X9903]
-XVP600 [KSX-X9902]
-XVP610 [KSX-X9902]
-
-(see http://www.xirlink.com/ibmpccamera/ for updates, they refer
-to these new cameras by Windows driver dated 12-27-99, v3005 BETA)
-These cameras have two interfaces, one endpoint in each (iso, bulk).
-Such type of cameras is referred to as "model 2". They are supported
-(with exception of 352x288 native mode).
-
-Some IBM NetCameras (Model 4) are made to generate only compressed
-video streams. This is great for performance, but unfortunately
-nobody knows how to decompress the stream :-( Therefore, these
-cameras are *unsupported* and if you try to use one of those, all
-you get is random colored horizontal streaks, not the image!
-If you have one of those cameras, you probably should return it
-to the store and get something that is supported.
-
-Tell me more about all that "model" business
---------------------------------------------
-
-I just invented model numbers to uniquely identify flavors of the
-hardware/firmware that were sold. It was very confusing to use
-brand names or some other internal numbering schemes. So I found
-by experimentation that all Xirlink chipsets fall into four big
-classes, and I called them "models". Each model is programmed in
-its own way, and each model sends back the video in its own way.
-
-Quirks of Model 2 cameras:
--------------------------
-
-Model 2 does not have hardware contrast control. Corresponding V4L
-control is implemented in software, which is not very nice to your
-CPU, but at least it works.
-
-This driver provides 352x288 mode by switching the camera into
-quasi-352x288 RGB mode (800 Kbits per frame) essentially limiting
-this mode to 10 frames per second or less, in ideal conditions on
-the bus (USB is shared, after all). The frame rate
-has to be programmed very conservatively. Additional concern is that
-frame rate depends on brightness setting; therefore the picture can
-be good at one brightness and broken at another! I did not want to fix
-the frame rate at slowest setting, but I had to move it pretty much down
-the scale (so that framerate option barely matters). I also noticed that
-camera after first powering up produces frames slightly faster than during
-consecutive uses. All this means that if you use 352x288 (which is
-default), be warned - you may encounter broken picture on first connect;
-try to adjust brightness - brighter image is slower, so USB will be able
-to send all data. However if you regularly use Model 2 cameras you may
-prefer 176x144 which makes perfectly good I420, with no scaling and
-lesser demands on USB (300 Kbits per second, or 26 frames per second).
-
-Another strange effect of 352x288 mode is the fine vertical grid visible
-on some colored surfaces. I am sure it is caused by me not understanding
-what the camera is trying to say. Blame trade secrets for that.
-
-The camera that I had also has a hardware quirk: if disconnected,
-it needs few minutes to "relax" before it can be plugged in again
-(poorly designed USB processor reset circuit?)
-
-[Veo Stingray with Product ID 0x800C is also Model 2, but I haven't
-observed this particular flaw in it.]
-
-Model 2 camera can be programmed for very high sensitivity (even starlight
-may be enough), this makes it convenient for tinkering with. The driver
-code has enough comments to help a programmer to tweak the camera
-as s/he feels necessary.
-
-WHAT YOU NEED:
-
-- A supported IBM PC (C-it) camera (model 1 or 2)
-
-- A Linux box with USB support (2.3/2.4; 2.2 w/backport may work)
-
-- A Video4Linux compatible frame grabber program such as xawtv.
-  
-HOW TO COMPILE THE DRIVER:
-
-You need to compile the driver only if you are a developer
-or if you want to make changes to the code. Most distributions
-precompile all modules, so you can go directly to the next
-section "HOW TO USE THE DRIVER".
-
-The ibmcam driver uses usbvideo helper library (module),
-so if you are studying the ibmcam code you will be led there.
-
-The driver itself consists of only one file in usb/ directory:
-ibmcam.c. This file is included into the Linux kernel build
-process if you configure the kernel for CONFIG_USB_IBMCAM.
-Run "make xconfig" and in USB section you will find the IBM
-camera driver. Select it, save the configuration and recompile.
-
-HOW TO USE THE DRIVER:
-
-I recommend to compile driver as a module. This gives you an
-easier access to its configuration. The camera has many more
-settings than V4L can operate, so some settings are done using
-module options.
-
-To begin with, on most modern Linux distributions the driver
-will be automatically loaded whenever you plug the supported
-camera in. Therefore, you don't need to do anything. However
-if you want to experiment with some module parameters then
-you can load and unload the driver manually, with camera
-plugged in or unplugged.
-
-Typically module is installed with command 'modprobe', like this:
-
-# modprobe ibmcam framerate=1
-
-Alternatively you can use 'insmod' in similar fashion:
-
-# insmod /lib/modules/2.x.y/usb/ibmcam.o framerate=1
-
-Module can be inserted with camera connected or disconnected.
-
-The driver can have options, though some defaults are provided.
-
-Driver options: (* indicates that option is model-dependent)
-
-Name            Type            Range [default] Example
---------------  --------------  --------------  ------------------
-debug           Integer         0-9 [0]         debug=1
-flags           Integer         0-0xFF [0]      flags=0x0d
-framerate       Integer         0-6 [2]         framerate=1
-hue_correction  Integer         0-255 [128]     hue_correction=115
-init_brightness Integer         0-255 [128]     init_brightness=100
-init_contrast   Integer         0-255 [192]     init_contrast=200
-init_color      Integer         0-255 [128]     init_color=130
-init_hue        Integer         0-255 [128]     init_hue=115
-lighting        Integer         0-2* [1]        lighting=2
-sharpness       Integer         0-6* [4]        sharpness=3
-size            Integer         0-2* [2]        size=1
-
-Options for Model 2 only:
-
-Name            Type            Range [default] Example
---------------  --------------  --------------  ------------------
-init_model2_rg  Integer         0..255 [0x70]   init_model2_rg=128
-init_model2_rg2 Integer         0..255 [0x2f]   init_model2_rg2=50
-init_model2_sat Integer         0..255 [0x34]   init_model2_sat=65
-init_model2_yb  Integer         0..255 [0xa0]   init_model2_yb=200
-
-debug           You don't need this option unless you are a developer.
-                If you are a developer then you will see in the code
-                what values do what. 0=off.
-
-flags           This is a bit mask, and you can combine any number of
-                bits to produce what you want. Usually you don't want
-                any of extra features this option provides:
-
-                FLAGS_RETRY_VIDIOCSYNC  1  This bit allows to retry failed
-                                           VIDIOCSYNC ioctls without failing.
-                                           Will work with xawtv, will not
-                                           with xrealproducer. Default is
-                                           not set.
-                FLAGS_MONOCHROME        2  Activates monochrome (b/w) mode.
-                FLAGS_DISPLAY_HINTS     4  Shows colored pixels which have
-                                           magic meaning to developers.
-                FLAGS_OVERLAY_STATS     8  Shows tiny numbers on screen,
-                                           useful only for debugging.
-                FLAGS_FORCE_TESTPATTERN 16 Shows blue screen with numbers.
-                FLAGS_SEPARATE_FRAMES   32 Shows each frame separately, as
-                                           it was received from the camera.
-                                           Default (not set) is to mix the
-                                           preceding frame in to compensate
-                                           for occasional loss of Isoc data
-                                           on high frame rates.
-                FLAGS_CLEAN_FRAMES      64 Forces "cleanup" of each frame
-                                           prior to use; relevant only if
-                                           FLAGS_SEPARATE_FRAMES is set.
-                                           Default is not to clean frames,
-                                           this is a little faster but may
-                                           produce flicker if frame rate is
-                                           too high and Isoc data gets lost.
-                FLAGS_NO_DECODING      128 This flag turns the video stream
-                                           decoder off, and dumps the raw
-                                           Isoc data from the camera into
-                                           the reading process. Useful to
-                                           developers, but not to users.
-
-framerate       This setting controls frame rate of the camera. This is
-                an approximate setting (in terms of "worst" ... "best")
-                because camera changes frame rate depending on amount
-                of light available. Setting 0 is slowest, 6 is fastest.
-                Beware - fast settings are very demanding and may not
-                work well with all video sizes. Be conservative.
-
-hue_correction  This highly optional setting allows to adjust the
-                hue of the image in a way slightly different from
-                what usual "hue" control does. Both controls affect
-                YUV colorspace: regular "hue" control adjusts only
-                U component, and this "hue_correction" option similarly
-                adjusts only V component. However usually it is enough
-                to tweak only U or V to compensate for colored light or
-                color temperature; this option simply allows more
-                complicated correction when and if it is necessary.
-
-init_brightness These settings specify _initial_ values which will be
-init_contrast   used to set up the camera. If your V4L application has
-init_color      its own controls to adjust the picture then these
-init_hue        controls will be used too. These options allow you to
-                preconfigure the camera when it gets connected, before
-                any V4L application connects to it. Good for webcams.
-
-init_model2_rg  These initial settings alter color balance of the
-init_model2_rg2 camera on hardware level. All four settings may be used
-init_model2_sat to tune the camera to specific lighting conditions. These
-init_model2_yb  settings only apply to Model 2 cameras.
-
-lighting        This option selects one of three hardware-defined
-                photosensitivity settings of the camera. 0=bright light,
-                1=Medium (default), 2=Low light. This setting affects
-                frame rate: the dimmer the lighting the lower the frame
-                rate (because longer exposition time is needed). The
-                Model 2 cameras allow values more than 2 for this option,
-                thus enabling extremely high sensitivity at cost of frame
-                rate, color saturation and imaging sensor noise.
-
-sharpness       This option controls smoothing (noise reduction)
-                made by camera. Setting 0 is most smooth, setting 6
-                is most sharp. Be aware that CMOS sensor used in the
-                camera is pretty noisy, so if you choose 6 you will
-                be greeted with "snowy" image. Default is 4. Model 2
-                cameras do not support this feature.
-
-size            This setting chooses one of several image sizes that are
-                supported by this driver. Cameras may support more, but
-                it's difficult to reverse-engineer all formats.
-                Following video sizes are supported:
-
-                size=0     128x96  (Model 1 only)
-                size=1     160x120
-                size=2     176x144
-                size=3     320x240 (Model 2 only)
-                size=4     352x240 (Model 2 only)
-                size=5     352x288
-                size=6     640x480 (Model 3 only)
-
-                The 352x288 is the native size of the Model 1 sensor
-                array, so it's the best resolution the camera can
-                yield. The best resolution of Model 2 is 176x144, and
-                larger images are produced by stretching the bitmap.
-                Model 3 has sensor with 640x480 grid, and it works too,
-                but the frame rate will be exceptionally low (1-2 FPS);
-                it may be still OK for some applications, like security.
-                Choose the image size you need. The smaller image can
-                support faster frame rate. Default is 352x288.
-
-For more information and the Troubleshooting FAQ visit this URL:
-
-                http://www.linux-usb.org/ibmcam/
-
-WHAT NEEDS TO BE DONE:
-
-- The button on the camera is not used. I don't know how to get to it.
-  I know now how to read button on Model 2, but what to do with it?
-
-- Camera reports its status back to the driver; however I don't know
-  what returned data means. If camera fails at some initialization
-  stage then something should be done, and I don't do that because
-  I don't even know that some command failed. This is mostly Model 1
-  concern because Model 2 uses different commands which do not return
-  status (and seem to complete successfully every time).
-
-- Some flavors of Model 4 NetCameras produce only compressed video
-  streams, and I don't know how to decode them.
-
-CREDITS:
-
-The code is based in no small part on the CPiA driver by Johannes Erdfelt,
-Randy Dunlap, and others. Big thanks to them for their pioneering work on that
-and the USB stack.
-
-I also thank John Lightsey for his donation of the Veo Stingray camera.
diff --git a/Documentation/usb/ov511.txt b/Documentation/usb/ov511.txt
deleted file mode 100644
index a7fc0432bff1..000000000000
--- a/Documentation/usb/ov511.txt
+++ /dev/null
@@ -1,289 +0,0 @@
--------------------------------------------------------------------------------
-Readme for Linux device driver for the OmniVision OV511 USB to camera bridge IC
--------------------------------------------------------------------------------
-
-Author: Mark McClelland
-Homepage: http://alpha.dyndns.org/ov511
-
-INTRODUCTION:
-
-This is a driver for the OV511, a USB-only chip used in many "webcam" devices.
-Any camera using the OV511/OV511+ and the OV6620/OV7610/20/20AE should work.
-Video capture devices that use the Philips SAA7111A decoder also work. It 
-supports streaming and capture of color or monochrome video via the Video4Linux
-API. Most V4L apps are compatible with it. Most resolutions with a width and
-height that are a multiple of 8 are supported.
-
-If you need more information, please visit the OV511 homepage at the above URL.
-
-WHAT YOU NEED:
-
-- If you want to help with the development, get the chip's specification docs at
-  http://www.ovt.com/omniusbp.html
-
-- A Video4Linux compatible frame grabber program (I recommend vidcat and xawtv)
-    vidcat is part of the w3cam package:  http://mpx.freeshell.net/
-    xawtv is available at:  http://linux.bytesex.org/xawtv/
-
-HOW TO USE IT:
-
-Note: These are simplified instructions. For complete instructions see:
-	http://alpha.dyndns.org/ov511/install.html
-
-You must have first compiled USB support, support for your specific USB host
-controller (UHCI or OHCI), and Video4Linux support for your kernel (I recommend
-making them modules.) Make sure "Enforce bandwidth allocation" is NOT enabled.
-
-Next, (as root):
-
-	modprobe usbcore
-	modprobe usb-uhci  <OR>  modprobe usb-ohci
-	modprobe videodev
-	modprobe ov511
-
-If it is not already there (it usually is), create the video device:
-
-	mknod /dev/video0 c 81 0
-
-Optionally, symlink /dev/video to /dev/video0
-
-You will have to set permissions on this device to allow you to read/write
-from it:
-
-	chmod 666 /dev/video
-	chmod 666 /dev/video0 (if necessary)
-	
-Now you are ready to run a video app! Both vidcat and xawtv work well for me
-at 640x480.
-	
-[Using vidcat:]
-
-	vidcat -s 640x480 -p c > test.jpg
-	xview test.jpg
-	
-[Using xawtv:]
-
-From the main xawtv directory:
-
-	make clean
-	./configure
-	make
-	make install
-
-Now you should be able to run xawtv. Right click for the options dialog. 
-
-MODULE PARAMETERS:
-
-  You can set these with:  insmod ov511 NAME=VALUE
-  There is currently no way to set these on a per-camera basis.
-
-  NAME: autobright
-  TYPE: integer (Boolean)
-  DEFAULT: 1
-  DESC: Brightness is normally under automatic control and can't be set
-        manually by the video app. Set to 0 for manual control.
-
-  NAME: autogain
-  TYPE: integer (Boolean)
-  DEFAULT: 1
-  DESC: Auto Gain Control enable. This feature is not yet implemented.
-
-  NAME: autoexp
-  TYPE: integer (Boolean)
-  DEFAULT: 1
-  DESC: Auto Exposure Control enable. This feature is not yet implemented.
-
-  NAME: debug
-  TYPE: integer (0-6)
-  DEFAULT: 3
-  DESC: Sets the threshold for printing debug messages. The higher the value,
-        the more is printed. The levels are cumulative, and are as follows:
-          0=no debug messages
-          1=init/detection/unload and other significant messages
-          2=some warning messages
-          3=config/control function calls
-          4=most function calls and data parsing messages
-          5=highly repetitive mesgs
-
-  NAME: snapshot
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Set to 1 to enable snapshot mode. read()/VIDIOCSYNC will block until
-	the snapshot button is pressed. Note: enabling this mode disables
-	/proc/video/ov511/<minor#>/button
-
-  NAME: cams
-  TYPE: integer (1-4 for OV511, 1-31 for OV511+)
-  DEFAULT: 1
-  DESC: Number of cameras allowed to stream simultaneously on a single bus.
-        Values higher than 1 reduce the data rate of each camera, allowing two
-        or more to be used at once. If you have a complicated setup involving
-        both OV511 and OV511+ cameras, trial-and-error may be necessary for
-        finding the optimum setting.
-
-  NAME: compress
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Set this to 1 to turn on the camera's compression engine. This can
-        potentially increase the frame rate at the expense of quality, if you
-        have a fast CPU. You must load the proper compression module for your
-        camera before starting your application (ov511_decomp or ov518_decomp).
-
-  NAME: testpat
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: This configures the camera's sensor to transmit a colored test-pattern
-        instead of an image. This does not work correctly yet.
-
-  NAME: dumppix
-  TYPE: integer (0-2)
-  DEFAULT: 0
-  DESC: Dumps raw pixel data and skips post-processing and format conversion.
-	It is for debugging purposes only. Options are:
-		0: Disable (default)
-		1: Dump raw data from camera, excluding headers and trailers
-		2: Dumps data exactly as received from camera
-
-  NAME: led
-  TYPE: integer (0-2)
-  DEFAULT: 1 (Always on)
-  DESC: Controls whether the LED (the little light) on the front of the camera
-	is always off (0), always on (1), or only on when driver is open (2).
-	This is not supported with the OV511, and might only work with certain
-	cameras (ones that actually have the LED wired to the control pin, and
-	not just hard-wired to be on all the time).
-
-  NAME: dump_bridge
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Dumps the bridge (OV511[+] or OV518[+]) register values to the system
-	log. Only useful for serious debugging/development purposes.
-
-  NAME: dump_sensor
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Dumps the sensor register values to the system log. Only useful for
-	serious debugging/development purposes.
-
-  NAME: printph
-  TYPE: integer (Boolean)
-  DEFAULT: 0
-  DESC: Setting this to 1 will dump the first 12 bytes of each isoc frame. This
-	is only useful if you are trying to debug problems with the isoc data
-	stream (i.e.: camera initializes, but vidcat hangs until Ctrl-C). Be
-	warned that this dumps a large number of messages to your kernel log.
-
-  NAME: phy, phuv, pvy, pvuv, qhy, qhuv, qvy, qvuv
-  TYPE: integer (0-63 for phy and phuv, 0-255 for rest)
-  DEFAULT: OV511 default values
-  DESC: These are registers 70h - 77h of the OV511, which control the
-	prediction ranges and quantization thresholds of the compressor, for
-	the Y and UV channels in the horizontal and vertical directions. See
-	the OV511 or OV511+ data sheet for more detailed descriptions. These
-	normally do not need to be changed.
-
-  NAME: lightfreq
-  TYPE: integer (0, 50, or 60)
-  DEFAULT: 0 (use sensor default)
-  DESC: Sets the sensor to match your lighting frequency. This can reduce the
-	appearance of "banding", i.e. horizontal lines or waves of light and
-	dark that are often caused by artificial lighting. Valid values are:
-		0 - Use default (depends on sensor, most likely 60 Hz)
-		50 - For European and Asian 50 Hz power
-		60 - For American 60 Hz power
-
-  NAME: bandingfilter
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (off)
-  DESC: Enables the sensorīs banding filter exposure algorithm. This reduces
-	or stabilizes the "banding" caused by some artificial light sources
-	(especially fluorescent). You might have to set lightfreq correctly for
-	this to work right. As an added bonus, this sometimes makes it
-	possible to capture your monitorīs output.
-
-  NAME: fastset
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (off)
-  DESC: Allows picture settings (brightness, contrast, color, and hue) to take
-	effect immediately, even in the middle of a frame. This reduces the
-	time to change settings, but can ruin frames during the change. Only
-	affects OmniVision sensors.
-
-  NAME: force_palette
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (off)
-  DESC: Forces the palette (color format) to a specific value. If an
-	application requests a different palette, it will be rejected, thereby
-	forcing it to try others until it succeeds. This is useful for forcing
-	greyscale mode with a color camera, for example. Supported modes are:
-		0                           (Allows all the following formats)
-		1   VIDEO_PALETTE_GREY      (Linear greyscale)
-		10  VIDEO_PALETTE_YUV420    (YUV 4:2:0 Planar)
-		15  VIDEO_PALETTE_YUV420P   (YUV 4:2:0 Planar, same as 10)
-
-  NAME: backlight
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (off)
-  DESC: Setting this flag changes the exposure algorithm for OmniVision sensors
-	such that objects in the camera's view (i.e. your head) can be clearly
-	seen when they are illuminated from behind. It reduces or eliminates
-	the sensor's auto-exposure function, so it should only be used when
-	needed. Additionally, it is only supported with the OV6620 and OV7620.
-
-  NAME: unit_video
-  TYPE: Up to 16 comma-separated integers
-  DEFAULT: 0,0,0... (automatically assign the next available minor(s))
-  DESC: You can specify up to 16 minor numbers to be assigned to ov511 devices.
-	For example, "unit_video=1,3" will make the driver use /dev/video1 and
-	/dev/video3 for the first two devices it detects. Additional devices
-	will be assigned automatically starting at the first available device
-	node (/dev/video0 in this case). Note that you cannot specify 0 as a
-	minor number. This feature requires kernel version 2.4.5 or higher.
-
-  NAME: remove_zeros
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (do not skip any incoming data)
-  DESC: Setting this to 1 will remove zero-padding from incoming data. This
-	will compensate for the blocks of corruption that can appear when the
-	camera cannot keep up with the speed of the USB bus (eg. at low frame
-	resolutions). This feature is always enabled when compression is on.
-
-  NAME: mirror
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (off)
-  DESC: Setting this to 1 will reverse ("mirror") the image horizontally. This
-	might be necessary if your camera has a custom lens assembly. This has
-	no effect with video capture devices.
-
-  NAME: ov518_color
-  TYPE: integer (Boolean)
-  DEFAULT: 0 (off)
-  DESC: Enable OV518 color support. This is off by default since it doesn't
-	work most of the time. If you want to try it, you must also load
-	ov518_decomp with the "nouv=0" parameter. If you get improper colors or
-	diagonal lines through the image, restart your video app and try again.
-	Repeat as necessary.
-
-WORKING FEATURES:
- o Color streaming/capture at most widths and heights that are multiples of 8.
- o Monochrome (use force_palette=1 to enable)
- o Setting/getting of saturation, contrast, brightness, and hue (only some of
-   them work the OV7620 and OV7620AE)
- o /proc status reporting
- o SAA7111A video capture support at 320x240 and 640x480
- o Compression support
- o SMP compatibility
-
-HOW TO CONTACT ME:
-
-You can email me at mark@alpha.dyndns.org . Please prefix the subject line
-with "OV511: " so that I am certain to notice your message.
-
-CREDITS:
-
-The code is based in no small part on the CPiA driver by Johannes Erdfelt,
-Randy Dunlap, and others. Big thanks to them for their pioneering work on that
-and the USB stack. Thanks to Bret Wallach for getting camera reg IO, ISOC, and
-image capture working. Thanks to Orion Sky Lawlor, Kevin Moore, and Claudio
-Matsuoka for their work as well.
-
diff --git a/Documentation/usb/se401.txt b/Documentation/usb/se401.txt
deleted file mode 100644
index 7b9d1c960a10..000000000000
--- a/Documentation/usb/se401.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Linux driver for SE401 based USB cameras
-
-Copyright, 2001, Jeroen Vreeken
-
-
-INTRODUCTION:
-
-The SE401 chip is the used in low-cost usb webcams.
-It is produced by Endpoints Inc. (www.endpoints.com).
-It interfaces directly to a cmos image sensor and USB. The only other major
-part in a se401 based camera is a dram chip.
-
-The following cameras are known to work with this driver:
-
-Aox se401 (non-branded) cameras
-Philips PVCV665 USB VGA webcam 'Vesta Fun'
-Kensington VideoCAM PC Camera Model 67014
-Kensington VideoCAM PC Camera Model 67015
-Kensington VideoCAM PC Camera Model 67016
-Kensington VideoCAM PC Camera Model 67017
-
-
-WHAT YOU NEED:
-
--	USB support
--	VIDEO4LINUX support
-
-More information about USB support for linux can be found at:
-http://www.linux-usb.org
-
-
-MODULE OPTIONS:
-
-When the driver is compiled as a module you can also use the 'flickerless'
-option. With it exposure is limited to values that do not interfere with the
-net frequency. Valid options for this option are 0, 50 and 60. (0=disable,
-50=50hz, 60=60hz)
-
-
-KNOWN PROBLEMS:
-
-The driver works fine with the usb-ohci and uhci host controller drivers,
-the default settings also work with usb-uhci. But sending more than one bulk
-transfer at a time with usb-uhci doesn't work yet.
-Users of usb-ohci and uhci can safely enlarge SE401_NUMSBUF in se401.h in
-order to increase the throughput (and thus framerate).
-
-
-HELP:
-
-The latest info on this driver can be found at:
-http://www.chello.nl/~j.vreeken/se401/
-And questions to me can be send to:
-pe1rxq@amsat.org
diff --git a/Documentation/usb/sn9c102.txt b/Documentation/usb/sn9c102.txt
deleted file mode 100644
index b957beae5607..000000000000
--- a/Documentation/usb/sn9c102.txt
+++ /dev/null
@@ -1,518 +0,0 @@
-
-                         SN9C10x PC Camera Controllers
-                                Driver for Linux
-                         =============================
-
-                               - Documentation -
-
-
-Index
-=====
-1.  Copyright
-2.  Disclaimer
-3.  License
-4.  Overview and features
-5.  Module dependencies
-6.  Module loading
-7.  Module parameters
-8.  Optional device control through "sysfs"
-9.  Supported devices
-10. Notes for V4L2 application developers
-11. Video frame formats
-12. Contact information
-13. Credits
-
-
-1. Copyright
-============
-Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>
-
-
-2. Disclaimer
-=============
-SONiX is a trademark of SONiX Technology Company Limited, inc.
-This software is not sponsored or developed by SONiX.
-
-
-3. License
-==========
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-
-4. Overview and features
-========================
-This driver attempts to support the video interface of the devices mounting the
-SONiX SN9C101, SN9C102 and SN9C103 PC Camera Controllers.
-
-It's worth to note that SONiX has never collaborated with the author during the
-development of this project, despite several requests for enough detailed
-specifications of the register tables, compression engine and video data format
-of the above chips. Nevertheless, these informations are no longer necessary,
-becouse all the aspects related to these chips are known and have been
-described in detail in this documentation.
-
-The driver relies on the Video4Linux2 and USB core modules. It has been
-designed to run properly on SMP systems as well.
-
-The latest version of the SN9C10x driver can be found at the following URL:
-http://www.linux-projects.org/
-
-Some of the features of the driver are:
-
-- full compliance with the Video4Linux2 API (see also "Notes for V4L2
-  application developers" paragraph);
-- available mmap or read/poll methods for video streaming through isochronous
-  data transfers;
-- automatic detection of image sensor;
-- support for built-in microphone interface;
-- support for any window resolutions and optional panning within the maximum
-  pixel area of image sensor;
-- image downscaling with arbitrary scaling factors from 1, 2 and 4 in both
-  directions (see "Notes for V4L2 application developers" paragraph);
-- two different video formats for uncompressed or compressed data in low or
-  high compression quality (see also "Notes for V4L2 application developers"
-  and "Video frame formats" paragraphs);
-- full support for the capabilities of many of the possible image sensors that
-  can be connected to the SN9C10x bridges, including, for istance, red, green,
-  blue and global gain adjustments and exposure (see "Supported devices"
-  paragraph for details);
-- use of default color settings for sunlight conditions;
-- dynamic I/O interface for both SN9C10x and image sensor control and
-  monitoring (see "Optional device control through 'sysfs'" paragraph);
-- dynamic driver control thanks to various module parameters (see "Module
-  parameters" paragraph);
-- up to 64 cameras can be handled at the same time; they can be connected and
-  disconnected from the host many times without turning off the computer, if
-  the system supports hotplugging;
-- no known bugs.
-
-
-5. Module dependencies
-======================
-For it to work properly, the driver needs kernel support for Video4Linux and
-USB.
-
-The following options of the kernel configuration file must be enabled and
-corresponding modules must be compiled:
-
-	# Multimedia devices
-	#
-	CONFIG_VIDEO_DEV=m
-
-To enable advanced debugging functionality on the device through /sysfs:
-
-	# Multimedia devices
-	#
-	CONFIG_VIDEO_ADV_DEBUG=y
-
-	# USB support
-	#
-	CONFIG_USB=m
-
-In addition, depending on the hardware being used, the modules below are
-necessary:
-
-	# USB Host Controller Drivers
-	#
-	CONFIG_USB_EHCI_HCD=m
-	CONFIG_USB_UHCI_HCD=m
-	CONFIG_USB_OHCI_HCD=m
-
-The SN9C103 controller also provides a built-in microphone interface. It is
-supported by the USB Audio driver thanks to the ALSA API:
-
-	# Sound
-	#
-	CONFIG_SOUND=y
-
-	# Advanced Linux Sound Architecture
-	#
-	CONFIG_SND=m
-
-	# USB devices
-	#
-	CONFIG_SND_USB_AUDIO=m
-
-And finally:
-
-	# USB Multimedia devices
-	#
-	CONFIG_USB_SN9C102=m
-
-
-6. Module loading
-=================
-To use the driver, it is necessary to load the "sn9c102" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
-
-Loading can be done as shown below:
-
-	[root@localhost home]# modprobe sn9c102
-
-At this point the devices should be recognized. You can invoke "dmesg" to
-analyze kernel messages and verify that the loading process has gone well:
-
-	[user@localhost home]$ dmesg
-
-
-7. Module parameters
-====================
-Module parameters are listed below:
--------------------------------------------------------------------------------
-Name:           video_nr
-Type:           short array (min = 0, max = 64)
-Syntax:         <-1|n[,...]> 
-Description:    Specify V4L2 minor mode number:
-                -1 = use next available
-                 n = use minor number n
-                You can specify up to 64 cameras this way.
-                For example:
-                video_nr=-1,2,-1 would assign minor number 2 to the second
-                recognized camera and use auto for the first one and for every
-                other camera.
-Default:        -1
--------------------------------------------------------------------------------
-Name:           force_munmap
-Type:           bool array (min = 0, max = 64)
-Syntax:         <0|1[,...]> 
-Description:    Force the application to unmap previously mapped buffer memory
-                before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
-                all the applications support this feature. This parameter is
-                specific for each detected camera.
-                0 = do not force memory unmapping
-                1 = force memory unmapping (save memory)
-Default:        0
--------------------------------------------------------------------------------
-Name:           frame_timeout
-Type:           uint array (min = 0, max = 64)
-Syntax:         <n[,...]>
-Description:    Timeout for a video frame in seconds. This parameter is
-                specific for each detected camera. This parameter can be
-                changed at runtime thanks to the /sys filesystem interface.
-Default:        2
--------------------------------------------------------------------------------
-Name:           debug
-Type:           ushort
-Syntax:         <n> 
-Description:    Debugging information level, from 0 to 3:
-                0 = none (use carefully)
-                1 = critical errors
-                2 = significant informations
-                3 = more verbose messages
-                Level 3 is useful for testing only, when only one device
-                is used. It also shows some more informations about the
-                hardware being detected. This parameter can be changed at
-                runtime thanks to the /sys filesystem interface.
-Default:        2
--------------------------------------------------------------------------------
-
-
-8. Optional device control through "sysfs" [1]
-==========================================
-If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
-it is possible to read and write both the SN9C10x and the image sensor
-registers by using the "sysfs" filesystem interface.
-
-Every time a supported device is recognized, a write-only file named "green" is
-created in the /sys/class/video4linux/videoX directory. You can set the green
-channel's gain by writing the desired value to it. The value may range from 0
-to 15 for SN9C101 or SN9C102 bridges, from 0 to 127 for SN9C103 bridges.
-Similarly, only for SN9C103 controllers, blue and red gain control files are
-available in the same directory, for which accepted values may range from 0 to
-127.
-
-There are other four entries in the directory above for each registered camera:
-"reg", "val", "i2c_reg" and "i2c_val". The first two files control the
-SN9C10x bridge, while the other two control the sensor chip. "reg" and
-"i2c_reg" hold the values of the current register index where the following
-reading/writing operations are addressed at through "val" and "i2c_val". Their
-use is not intended for end-users. Note that "i2c_reg" and "i2c_val" will not
-be created if the sensor does not actually support the standard I2C protocol or
-its registers are not 8-bit long. Also, remember that you must be logged in as
-root before writing to them.
-
-As an example, suppose we were to want to read the value contained in the
-register number 1 of the sensor register table - which is usually the product
-identifier - of the camera registered as "/dev/video0":
-
-	[root@localhost #] cd /sys/class/video4linux/video0
-	[root@localhost #] echo 1 > i2c_reg
-	[root@localhost #] cat i2c_val
-
-Note that "cat" will fail if sensor registers cannot be read.
-
-Now let's set the green gain's register of the SN9C101 or SN9C102 chips to 2:
-
-	[root@localhost #] echo 0x11 > reg
-	[root@localhost #] echo 2 > val
-
-Note that the SN9C10x always returns 0 when some of its registers are read.
-To avoid race conditions, all the I/O accesses to the above files are
-serialized.
-
-The sysfs interface also provides the "frame_header" entry, which exports the
-frame header of the most recent requested and captured video frame. The header
-is always 18-bytes long and is appended to every video frame by the SN9C10x
-controllers. As an example, this additional information can be used by the user
-application for implementing auto-exposure features via software. 
-
-The following table describes the frame header:
-
-Byte #  Value         Description
-------  -----         -----------
-0x00    0xFF          Frame synchronisation pattern.
-0x01    0xFF          Frame synchronisation pattern.
-0x02    0x00          Frame synchronisation pattern.
-0x03    0xC4          Frame synchronisation pattern.
-0x04    0xC4          Frame synchronisation pattern.
-0x05    0x96          Frame synchronisation pattern.
-0x06    0xXX          Unknown meaning. The exact value depends on the chip;
-                      possible values are 0x00, 0x01 and 0x20.
-0x07    0xXX          Variable value, whose bits are ff00uzzc, where ff is a
-                      frame counter, u is unknown, zz is a size indicator
-                      (00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
-                      "compression enabled" (1 = yes, 0 = no).
-0x08    0xXX          Brightness sum inside Auto-Exposure area (low-byte).
-0x09    0xXX          Brightness sum inside Auto-Exposure area (high-byte).
-                      For a pure white image, this number will be equal to 500
-                      times the area of the specified AE area. For images
-                      that are not pure white, the value scales down according
-                      to relative whiteness.
-0x0A    0xXX          Brightness sum outside Auto-Exposure area (low-byte).
-0x0B    0xXX          Brightness sum outside Auto-Exposure area (high-byte).
-                      For a pure white image, this number will be equal to 125
-                      times the area outside of the specified AE area. For
-                      images that are not pure white, the value scales down
-                      according to relative whiteness.
-                      according to relative whiteness.
-
-The following bytes are used by the SN9C103 bridge only:
-
-0x0C    0xXX          Unknown meaning
-0x0D    0xXX          Unknown meaning
-0x0E    0xXX          Unknown meaning
-0x0F    0xXX          Unknown meaning
-0x10    0xXX          Unknown meaning
-0x11    0xXX          Unknown meaning
-
-The AE area (sx, sy, ex, ey) in the active window can be set by programming the
-registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C10x controllers, where one unit
-corresponds to 32 pixels.
-
-[1] Part of the meaning of the frame header has been documented by Bertrik
-    Sikken.
-
-
-9. Supported devices
-====================
-None of the names of the companies as well as their products will be mentioned
-here. They have never collaborated with the author, so no advertising.
-
-From the point of view of a driver, what unambiguously identify a device are
-its vendor and product USB identifiers. Below is a list of known identifiers of
-devices mounting the SN9C10x PC camera controllers:
-
-Vendor ID  Product ID
----------  ----------
-0x0c45     0x6001
-0x0c45     0x6005
-0x0c45     0x6007
-0x0c45     0x6009
-0x0c45     0x600d
-0x0c45     0x6024
-0x0c45     0x6025
-0x0c45     0x6028
-0x0c45     0x6029
-0x0c45     0x602a
-0x0c45     0x602b
-0x0c45     0x602c
-0x0c45     0x602d
-0x0c45     0x602e
-0x0c45     0x6030
-0x0c45     0x6080
-0x0c45     0x6082
-0x0c45     0x6083
-0x0c45     0x6088
-0x0c45     0x608a
-0x0c45     0x608b
-0x0c45     0x608c
-0x0c45     0x608e
-0x0c45     0x608f
-0x0c45     0x60a0
-0x0c45     0x60a2
-0x0c45     0x60a3
-0x0c45     0x60a8
-0x0c45     0x60aa
-0x0c45     0x60ab
-0x0c45     0x60ac
-0x0c45     0x60ae
-0x0c45     0x60af
-0x0c45     0x60b0
-0x0c45     0x60b2
-0x0c45     0x60b3
-0x0c45     0x60b8
-0x0c45     0x60ba
-0x0c45     0x60bb
-0x0c45     0x60bc
-0x0c45     0x60be
-
-The list above does not imply that all those devices work with this driver: up
-until now only the ones that mount the following image sensors are supported;
-kernel messages will always tell you whether this is the case:
-
-Model       Manufacturer
------       ------------
-HV7131D     Hynix Semiconductor, Inc.
-MI-0343     Micron Technology, Inc.
-OV7630      OmniVision Technologies, Inc.
-PAS106B     PixArt Imaging, Inc.
-PAS202BCA   PixArt Imaging, Inc.
-PAS202BCB   PixArt Imaging, Inc.
-TAS5110C1B  Taiwan Advanced Sensor Corporation
-TAS5130D1B  Taiwan Advanced Sensor Corporation
-
-All the available control settings of each image sensor are supported through
-the V4L2 interface.
-
-Donations of new models for further testing and support would be much
-appreciated. Non-available hardware will not be supported by the author of this
-driver.
-
-
-10. Notes for V4L2 application developers
-=========================================
-This driver follows the V4L2 API specifications. In particular, it enforces two
-rules:
-
-- exactly one I/O method, either "mmap" or "read", is associated with each
-file descriptor. Once it is selected, the application must close and reopen the
-device to switch to the other I/O method;
-
-- although it is not mandatory, previously mapped buffer memory should always
-be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
-The same number of buffers as before will be allocated again to match the size
-of the new video frames, so you have to map the buffers again before any I/O
-attempts on them.
-
-Consistently with the hardware limits, this driver also supports image
-downscaling with arbitrary scaling factors from 1, 2 and 4 in both directions.
-However, the V4L2 API specifications don't correctly define how the scaling
-factor can be chosen arbitrarily by the "negotiation" of the "source" and
-"target" rectangles. To work around this flaw, we have added the convention
-that, during the negotiation, whenever the "VIDIOC_S_CROP" ioctl is issued, the
-scaling factor is restored to 1.
-
-This driver supports two different video formats: the first one is the "8-bit
-Sequential Bayer" format and can be used to obtain uncompressed video data
-from the device through the current I/O method, while the second one provides
-"raw" compressed video data (without frame headers not related to the
-compressed data). The compression quality may vary from 0 to 1 and can be
-selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2
-ioctl's. For maximum flexibility, both the default active video format and the
-default compression quality depend on how the image sensor being used is
-initialized (as described in the documentation of the API for the image sensors
-supplied by this driver).
-
-
-11. Video frame formats [1]
-=======================
-The SN9C10x PC Camera Controllers can send images in two possible video
-formats over the USB: either native "Sequential RGB Bayer" or Huffman
-compressed. The latter is used to achieve high frame rates. The current video
-format may be selected or queried from the user application by calling the
-VIDIOC_S_FMT or VIDIOC_G_FMT ioctl's, as described in the V4L2 API
-specifications.
-
-The name "Sequential Bayer" indicates the organization of the red, green and
-blue pixels in one video frame. Each pixel is associated with a 8-bit long
-value and is disposed in memory according to the pattern shown below:
-
-B[0]   G[1]    B[2]    G[3]    ...   B[m-2]         G[m-1]
-G[m]   R[m+1]  G[m+2]  R[m+2]  ...   G[2m-2]        R[2m-1] 
-...
-...                                  B[(n-1)(m-2)]  G[(n-1)(m-1)]
-...                                  G[n(m-2)]      R[n(m-1)]
-
-The above matrix also represents the sequential or progressive read-out mode of
-the (n, m) Bayer color filter array used in many CCD/CMOS image sensors.
-
-One compressed video frame consists of a bitstream that encodes for every R, G,
-or B pixel the difference between the value of the pixel itself and some
-reference pixel value. Pixels are organised in the Bayer pattern and the Bayer
-sub-pixels are tracked individually and alternatingly. For example, in the
-first line values for the B and G1 pixels are alternatingly encoded, while in
-the second line values for the G2 and R pixels are alternatingly encoded.
-
-The pixel reference value is calculated as follows:
-- the 4 top left pixels are encoded in raw uncompressed 8-bit format;
-- the value in the top two rows is the value of the pixel left of the current
-  pixel;
-- the value in the left column is the value of the pixel above the current
-  pixel;
-- for all other pixels, the reference value is the average of the value of the
-  pixel on the left and the value of the pixel above the current pixel;
-- there is one code in the bitstream that specifies the value of a pixel
-  directly (in 4-bit resolution);
-- pixel values need to be clamped inside the range [0..255] for proper
-  decoding.
-
-The algorithm purely describes the conversion from compressed Bayer code used
-in the SN9C10x chips to uncompressed Bayer. Additional steps are required to
-convert this to a color image (i.e. a color interpolation algorithm).
- 
-The following Huffman codes have been found:
-0: +0 (relative to reference pixel value) 
-100: +4
-101: -4?
-1110xxxx: set absolute value to xxxx.0000 
-1101: +11
-1111: -11
-11001: +20
-110000: -20
-110001: ??? - these codes are apparently not used
-
-[1] The Huffman compression algorithm has been reverse-engineered and
-    documented by Bertrik Sikken.
-
-
-12. Contact information
-=======================
-The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
-
-GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
-'FCE635A4'; the public 1024-bit key should be available at any keyserver;
-the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
-
-
-13. Credits
-===========
-Many thanks to following persons for their contribute (listed in alphabetical
-order):
-
-- Luca Capello for the donation of a webcam;
-- Philippe Coval for having helped testing the PAS202BCA image sensor;
-- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
-  donation of a webcam;
-- Jon Hollstrom for the donation of a webcam;
-- Carlos Eduardo Medaglia Dyonisio, who added the support for the PAS202BCB
-  image sensor;
-- Stefano Mozzi, who donated 45 EU;
-- Andrew Pearce for the donation of a webcam;
-- Bertrik Sikken, who reverse-engineered and documented the Huffman compression
-  algorithm used in the SN9C10x controllers and implemented the first decoder;
-- Mizuno Takafumi for the donation of a webcam;
-- an "anonymous" donator (who didn't want his name to be revealed) for the
-  donation of a webcam.
diff --git a/Documentation/usb/stv680.txt b/Documentation/usb/stv680.txt
deleted file mode 100644
index 6448041e7a37..000000000000
--- a/Documentation/usb/stv680.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Linux driver for STV0680 based USB cameras
-
-Copyright, 2001, Kevin Sisson
-
-
-INTRODUCTION:
-
-STMicroelectronics produces the STV0680B chip, which comes in two 
-types, -001 and -003. The -003 version allows the recording and downloading 
-of sound clips from the camera, and allows a flash attachment. Otherwise, 
-it uses the same commands as the -001 version. Both versions support a 
-variety of SDRAM sizes and sensors, allowing for a maximum of 26 VGA or 20 
-CIF pictures. The STV0680 supports either a serial or a usb interface, and 
-video is possible through the usb interface.
-
-The following cameras are known to work with this driver, although any 
-camera with Vendor/Product codes of 0553/0202 should work:
-
-Aiptek Pencam (various models)
-Nisis QuickPix 2
-Radio Shack 'Kid's digital camera' (#60-1207)
-At least one Trust Spycam model
-Several other European brand models
-
-WHAT YOU NEED:
-
--	USB support
--	VIDEO4LINUX support
-
-More information about USB support for linux can be found at:
-http://www.linux-usb.org
-
-
-MODULE OPTIONS:
-
-When the driver is compiled as a module, you can set a "swapRGB=1"
-option, if necessary, for those applications that require it 
-(such as xawtv). However, the driver should detect and set this 
-automatically, so this option should not normally be used.
-
-
-KNOWN PROBLEMS:
-
-The driver seems to work better with the usb-ohci than the usb-uhci host 
-controller driver. 
-
-HELP:
-
-The latest info on this driver can be found at:
-http://personal.clt.bellsouth.net/~kjsisson or at
-http://stv0680-usb.sourceforge.net
-
-Any questions to me can be send to:  kjsisson@bellsouth.net
-
-
diff --git a/Documentation/usb/w9968cf.txt b/Documentation/usb/w9968cf.txt
deleted file mode 100644
index 9d46cd0b19e3..000000000000
--- a/Documentation/usb/w9968cf.txt
+++ /dev/null
@@ -1,461 +0,0 @@
-
-                   W996[87]CF JPEG USB Dual Mode Camera Chip 
-                     Driver for Linux 2.6 (basic version)
-                   =========================================
-
-                               - Documentation -
-
-
-Index
-=====
-1.  Copyright
-2.  Disclaimer
-3.  License
-4.  Overview
-5.  Supported devices
-6.  Module dependencies
-7.  Module loading
-8.  Module paramaters
-9.  Contact information
-10. Credits
-
-
-1. Copyright
-============
-Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>
-
-
-2. Disclaimer
-=============
-Winbond is a trademark of Winbond Electronics Corporation.
-This software is not sponsored or developed by Winbond.
-
-
-3. License
-==========
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-
-4. Overview
-===========
-This driver supports the video streaming capabilities of the devices mounting
-Winbond W9967CF and Winbond W9968CF JPEG USB Dual Mode Camera Chips. OV681
-based cameras should be supported as well.
-
-The driver is divided into two modules: the basic one, "w9968cf", is needed for
-the supported devices to work; the second one, "w9968cf-vpp", is an optional
-module, which provides some useful video post-processing functions like video
-decoding, up-scaling and colour conversions.
-
-Note that the official kernels do neither include nor support the second
-module for performance purposes. Therefore, it is always recommended to
-download and install the latest and complete release of the driver,
-replacing the existing one, if present.
-
-The latest and full-featured version of the W996[87]CF driver can be found at:
-http://www.linux-projects.org. Please refer to the documentation included in
-that package, if you are going to use it.
-
-Up to 32 cameras can be handled at the same time. They can be connected and
-disconnected from the host many times without turning off the computer, if
-your system supports the hotplug facility.
-
-To change the default settings for each camera, many parameters can be passed
-through command line when the module is loaded into memory.
-
-The driver relies on the Video4Linux, USB and I2C core modules. It has been
-designed to run properly on SMP systems as well. An additional module,
-"ovcamchip", is mandatory; it provides support for some OmniVision image
-sensors connected to the W996[87]CF chips; if found in the system, the module
-will be automatically loaded by default (provided that the kernel has been
-compiled with the automatic module loading option).
-
-
-5. Supported devices
-====================
-At the moment, known W996[87]CF and OV681 based devices are:
-- Aroma Digi Pen VGA Dual Mode ADG-5000 (unknown image sensor)
-- AVerMedia AVerTV USB (SAA7111A, Philips FI1216Mk2 tuner, PT2313L audio chip)
-- Creative Labs Video Blaster WebCam Go (OmniVision OV7610 sensor)
-- Creative Labs Video Blaster WebCam Go Plus (OmniVision OV7620 sensor)
-- Lebon LDC-035A (unknown image sensor)
-- Ezonics EZ-802 EZMega Cam (OmniVision OV8610C sensor)
-- OmniVision OV8610-EDE (OmniVision OV8610 sensor)
-- OPCOM Digi Pen VGA Dual Mode Pen Camera (unknown image sensor)
-- Pretec Digi Pen-II (OmniVision OV7620 sensor)
-- Pretec DigiPen-480 (OmniVision OV8610 sensor)
-
-If you know any other W996[87]CF or OV681 based cameras, please contact me.
-
-The list above does not imply that all those devices work with this driver: up
-until now only webcams that have an image sensor supported by the "ovcamchip"
-module work. Kernel messages will always tell you whether this is case.
-
-Possible external microcontrollers of those webcams are not supported: this
-means that still images cannot be downloaded from the device memory.
-
-Furthermore, it's worth to note that I was only able to run tests on my
-"Creative Labs Video Blaster WebCam Go". Donations of other models, for
-additional testing and full support, would be much appreciated.
-
-
-6. Module dependencies
-======================
-For it to work properly, the driver needs kernel support for Video4Linux, USB
-and I2C, and the "ovcamchip" module for the image sensor. Make sure you are not
-actually using any external "ovcamchip" module, given that the W996[87]CF 
-driver depends on the version of the module present in the official kernels.
-
-The following options of the kernel configuration file must be enabled and
-corresponding modules must be compiled:
-
-	# Multimedia devices
-	#
-	CONFIG_VIDEO_DEV=m
-
-	# I2C support
-	#
-	CONFIG_I2C=m
-
-The I2C core module can be compiled statically in the kernel as well.
-
-	# OmniVision Camera Chip support
-	#
-	CONFIG_VIDEO_OVCAMCHIP=m
-
-	# USB support
-	#
-	CONFIG_USB=m
-
-In addition, depending on the hardware being used, only one of the modules
-below is necessary:
-
-	# USB Host Controller Drivers
-	#
-	CONFIG_USB_EHCI_HCD=m
-	CONFIG_USB_UHCI_HCD=m
-	CONFIG_USB_OHCI_HCD=m
-
-And finally:
-
-	# USB Multimedia devices
-	#
-	CONFIG_USB_W9968CF=m
-
-
-7. Module loading
-=================
-To use the driver, it is necessary to load the "w9968cf" module into memory
-after every other module required.
-
-Loading can be done this way, from root:
-
-	[root@localhost home]# modprobe usbcore
-	[root@localhost home]# modprobe i2c-core
-	[root@localhost home]# modprobe videodev
-	[root@localhost home]# modprobe w9968cf
-
-At this point the pertinent devices should be recognized: "dmesg" can be used
-to analyze kernel messages:
-
-	[user@localhost home]$ dmesg
-
-There are a lot of parameters the module can use to change the default
-settings for each device. To list every possible parameter with a brief
-explanation about them and which syntax to use, it is recommended to run the
-"modinfo" command:
-
-	[root@locahost home]# modinfo w9968cf
-
-
-8. Module parameters
-====================
-Module parameters are listed below:
--------------------------------------------------------------------------------
-Name:            ovmod_load
-Type:            bool
-Syntax:          <0|1>
-Description:     Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
-                 If enabled, 'insmod' searches for the required 'ovcamchip'
-                 module in the system, according to its configuration, and
-                 loads that module automatically. This action is performed as
-                 once soon as the 'w9968cf' module is loaded into memory.
-Default:         1
-Note:            The kernel must be compiled with the CONFIG_KMOD option
-                 enabled for the 'ovcamchip' module to be loaded and for
-                 this parameter to be present.
--------------------------------------------------------------------------------
-Name:           simcams 
-Type:           int 
-Syntax:         <n> 
-Description:    Number of cameras allowed to stream simultaneously.
-                n may vary from 0 to 32.
-Default:        32
--------------------------------------------------------------------------------
-Name:           video_nr
-Type:           int array (min = 0, max = 32)
-Syntax:         <-1|n[,...]> 
-Description:    Specify V4L minor mode number.
-                -1 = use next available
-                 n = use minor number n
-                You can specify up to 32 cameras this way.
-                For example:
-                video_nr=-1,2,-1 would assign minor number 2 to the second
-                recognized camera and use auto for the first one and for every
-                other camera.
-Default:        -1
--------------------------------------------------------------------------------
-Name:           packet_size
-Type:           int array (min = 0, max = 32)
-Syntax:         <n[,...]> 
-Description:    Specify the maximum data payload size in bytes for alternate
-                settings, for each device. n is scaled between 63 and 1023.
-Default:        1023
--------------------------------------------------------------------------------
-Name:           max_buffers
-Type:           int array (min = 0, max = 32)
-Syntax:         <n[,...]>
-Description:    For advanced users.
-                Specify the maximum number of video frame buffers to allocate
-                for each device, from 2 to 32.
-Default:        2
--------------------------------------------------------------------------------
-Name:           double_buffer
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]> 
-Description:    Hardware double buffering: 0 disabled, 1 enabled.
-                It should be enabled if you want smooth video output: if you
-                obtain out of sync. video, disable it, or try to
-                decrease the 'clockdiv' module parameter value.
-Default:        1 for every device.
--------------------------------------------------------------------------------
-Name:           clamping
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]> 
-Description:    Video data clamping: 0 disabled, 1 enabled.
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           filter_type
-Type:           int array (min = 0, max = 32)
-Syntax:         <0|1|2[,...]> 
-Description:    Video filter type.
-                0 none, 1 (1-2-1) 3-tap filter, 2 (2-3-6-3-2) 5-tap filter.
-                The filter is used to reduce noise and aliasing artifacts
-                produced by the CCD or CMOS image sensor.
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           largeview
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]> 
-Description:    Large view: 0 disabled, 1 enabled.
-Default:        1 for every device.
--------------------------------------------------------------------------------
-Name:           upscaling
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]> 
-Description:    Software scaling (for non-compressed video only):
-                0 disabled, 1 enabled.
-                Disable it if you have a slow CPU or you don't have enough
-                memory.
-Default:        0 for every device.
-Note:           If 'w9968cf-vpp' is not present, this parameter is set to 0.
--------------------------------------------------------------------------------
-Name:           decompression
-Type:           int array (min = 0, max = 32)
-Syntax:         <0|1|2[,...]>
-Description:    Software video decompression:
-                0 = disables decompression
-                    (doesn't allow formats needing decompression).
-                1 = forces decompression
-                    (allows formats needing decompression only).
-                2 = allows any permitted formats.
-                Formats supporting (de)compressed video are YUV422P and
-                YUV420P/YUV420 in any resolutions where width and height are
-                multiples of 16.
-Default:        2 for every device.
-Note:           If 'w9968cf-vpp' is not present, forcing decompression is not
-                allowed; in this case this parameter is set to 2.
--------------------------------------------------------------------------------
-Name:           force_palette
-Type:           int array (min = 0, max = 32)
-Syntax:         <0|9|10|13|15|8|7|1|6|3|4|5[,...]>
-Description:    Force picture palette.
-                In order:
-                 0 = Off - allows any of the following formats:
-                 9 = UYVY    16 bpp - Original video, compression disabled
-                10 = YUV420  12 bpp - Original video, compression enabled
-                13 = YUV422P 16 bpp - Original video, compression enabled
-                15 = YUV420P 12 bpp - Original video, compression enabled
-                 8 = YUVY    16 bpp - Software conversion from UYVY
-                 7 = YUV422  16 bpp - Software conversion from UYVY
-                 1 = GREY     8 bpp - Software conversion from UYVY
-                 6 = RGB555  16 bpp - Software conversion from UYVY
-                 3 = RGB565  16 bpp - Software conversion from UYVY
-                 4 = RGB24   24 bpp - Software conversion from UYVY
-                 5 = RGB32   32 bpp - Software conversion from UYVY
-                When not 0, this parameter will override 'decompression'.
-Default:        0 for every device. Initial palette is 9 (UYVY).
-Note:           If 'w9968cf-vpp' is not present, this parameter is set to 9.
--------------------------------------------------------------------------------
-Name:           force_rgb
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]>
-Description:    Read RGB video data instead of BGR:
-                1 = use RGB component ordering.
-                0 = use BGR component ordering.
-                This parameter has effect when using RGBX palettes only.
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           autobright
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]>
-Description:    Image sensor automatically changes brightness:
-                0 = no, 1 = yes
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           autoexp
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]>
-Description:    Image sensor automatically changes exposure:
-                0 = no, 1 = yes
-Default:        1 for every device.
--------------------------------------------------------------------------------
-Name:           lightfreq
-Type:           int array (min = 0, max = 32)
-Syntax:         <50|60[,...]>
-Description:    Light frequency in Hz:
-                50 for European and Asian lighting, 60 for American lighting.
-Default:        50 for every device.
--------------------------------------------------------------------------------
-Name:           bandingfilter
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]> 
-Description:    Banding filter to reduce effects of fluorescent 
-                lighting:
-                0 disabled, 1 enabled.
-                This filter tries to reduce the pattern of horizontal
-                light/dark bands caused by some (usually fluorescent) lighting.
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           clockdiv
-Type:           int array (min = 0, max = 32)
-Syntax:         <-1|n[,...]>
-Description:    Force pixel clock divisor to a specific value (for experts):
-                n may vary from 0 to 127.
-                -1 for automatic value.
-                See also the 'double_buffer' module parameter.
-Default:        -1 for every device.
--------------------------------------------------------------------------------
-Name:           backlight
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]>
-Description:    Objects are lit from behind:
-                0 = no, 1 = yes
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           mirror
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]>
-Description:    Reverse image horizontally:
-                0 = no, 1 = yes
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           monochrome
-Type:           bool array (min = 0, max = 32)
-Syntax:         <0|1[,...]> 
-Description:    The image sensor is monochrome:
-                0 = no, 1 = yes
-Default:        0 for every device.
--------------------------------------------------------------------------------
-Name:           brightness
-Type:           long array (min = 0, max = 32)
-Syntax:         <n[,...]>
-Description:    Set picture brightness (0-65535).
-                This parameter has no effect if 'autobright' is enabled.
-Default:        31000 for every device.
--------------------------------------------------------------------------------
-Name:           hue
-Type:           long array (min = 0, max = 32)
-Syntax:         <n[,...]>
-Description:    Set picture hue (0-65535).
-Default:        32768 for every device.
--------------------------------------------------------------------------------
-Name:           colour
-Type:           long array (min = 0, max = 32)
-Syntax:         <n[,...]>
-Description:    Set picture saturation (0-65535).
-Default:        32768 for every device.
--------------------------------------------------------------------------------
-Name:           contrast
-Type:           long array (min = 0, max = 32)
-Syntax:         <n[,...]> 
-Description:    Set picture contrast (0-65535).
-Default:        50000 for every device.
--------------------------------------------------------------------------------
-Name:           whiteness
-Type:           long array (min = 0, max = 32)
-Syntax:         <n[,...]> 
-Description:    Set picture whiteness (0-65535).
-Default:        32768 for every device.
--------------------------------------------------------------------------------
-Name:           debug
-Type:           int
-Syntax:         <n> 
-Description:    Debugging information level, from 0 to 6:
-                0 = none (use carefully)
-                1 = critical errors
-                2 = significant informations
-                3 = configuration or general messages
-                4 = warnings
-                5 = called functions
-                6 = function internals
-                Level 5 and 6 are useful for testing only, when only one
-                device is used.
-Default:        2
--------------------------------------------------------------------------------
-Name:           specific_debug
-Type:           bool
-Syntax:         <0|1>
-Description:    Enable or disable specific debugging messages:
-                0 = print messages concerning every level <= 'debug' level.
-                1 = print messages concerning the level indicated by 'debug'.
-Default:        0
--------------------------------------------------------------------------------
-
-
-9. Contact information
-======================
-I may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
-
-I can accept GPG/PGP encrypted e-mail. My GPG key ID is 'FCE635A4'.
-My public 1024-bit key should be available at your keyserver; the fingerprint
-is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
-
-
-10. Credits
-==========
-The development would not have proceed much further without having looked at
-the source code of other drivers and without the help of several persons; in
-particular:
-
-- the I2C interface to kernel and high-level image sensor control routines have
-  been taken from the OV511 driver by Mark McClelland;
-
-- memory management code has been copied from the bttv driver by Ralph Metzler,
-  Marcus Metzler and Gerd Knorr;
-
-- the low-level I2C read function has been written by Frederic Jouault;
-
-- the low-level I2C fast write function has been written by Piotr Czerczak.
diff --git a/Documentation/usb/zc0301.txt b/Documentation/usb/zc0301.txt
deleted file mode 100644
index f55262c6733b..000000000000
--- a/Documentation/usb/zc0301.txt
+++ /dev/null
@@ -1,254 +0,0 @@
-
-                    ZC0301 Image Processor and Control Chip
-                                Driver for Linux
-                    =======================================
-
-                               - Documentation -
-
-
-Index
-=====
-1.  Copyright
-2.  Disclaimer
-3.  License
-4.  Overview and features
-5.  Module dependencies
-6.  Module loading
-7.  Module parameters
-8.  Supported devices
-9.  Notes for V4L2 application developers
-10. Contact information
-11. Credits
-
-
-1. Copyright
-============
-Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
-
-
-2. Disclaimer
-=============
-This software is not developed or sponsored by Z-Star Microelectronics Corp.
-Trademarks are property of their respective owner.
-
-
-3. License
-==========
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-
-4. Overview and features
-========================
-This driver supports the video interface of the devices mounting the ZC0301
-Image Processor and Control Chip.
-
-The driver relies on the Video4Linux2 and USB core modules. It has been
-designed to run properly on SMP systems as well.
-
-The latest version of the ZC0301 driver can be found at the following URL:
-http://www.linux-projects.org/
-
-Some of the features of the driver are:
-
-- full compliance with the Video4Linux2 API (see also "Notes for V4L2
-  application developers" paragraph);
-- available mmap or read/poll methods for video streaming through isochronous
-  data transfers;
-- automatic detection of image sensor;
-- video format is standard JPEG;
-- dynamic driver control thanks to various module parameters (see "Module
-  parameters" paragraph);
-- up to 64 cameras can be handled at the same time; they can be connected and
-  disconnected from the host many times without turning off the computer, if
-  the system supports hotplugging;
-
-
-5. Module dependencies
-======================
-For it to work properly, the driver needs kernel support for Video4Linux and
-USB.
-
-The following options of the kernel configuration file must be enabled and
-corresponding modules must be compiled:
-
-	# Multimedia devices
-	#
-	CONFIG_VIDEO_DEV=m
-
-	# USB support
-	#
-	CONFIG_USB=m
-
-In addition, depending on the hardware being used, the modules below are
-necessary:
-
-	# USB Host Controller Drivers
-	#
-	CONFIG_USB_EHCI_HCD=m
-	CONFIG_USB_UHCI_HCD=m
-	CONFIG_USB_OHCI_HCD=m
-
-The ZC0301 controller also provides a built-in microphone interface. It is
-supported by the USB Audio driver thanks to the ALSA API:
-
-	# Sound
-	#
-	CONFIG_SOUND=y
-
-	# Advanced Linux Sound Architecture
-	#
-	CONFIG_SND=m
-
-	# USB devices
-	#
-	CONFIG_SND_USB_AUDIO=m
-
-And finally:
-
-	# USB Multimedia devices
-	#
-	CONFIG_USB_ZC0301=m
-
-
-6. Module loading
-=================
-To use the driver, it is necessary to load the "zc0301" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
-
-Loading can be done as shown below:
-
-	[root@localhost home]# modprobe zc0301
-
-At this point the devices should be recognized. You can invoke "dmesg" to
-analyze kernel messages and verify that the loading process has gone well:
-
-	[user@localhost home]$ dmesg
-
-
-7. Module parameters
-====================
-Module parameters are listed below:
--------------------------------------------------------------------------------
-Name:           video_nr
-Type:           short array (min = 0, max = 64)
-Syntax:         <-1|n[,...]>
-Description:    Specify V4L2 minor mode number:
-                -1 = use next available
-                 n = use minor number n
-                You can specify up to 64 cameras this way.
-                For example:
-                video_nr=-1,2,-1 would assign minor number 2 to the second
-                registered camera and use auto for the first one and for every
-                other camera.
-Default:        -1
--------------------------------------------------------------------------------
-Name:           force_munmap
-Type:           bool array (min = 0, max = 64)
-Syntax:         <0|1[,...]>
-Description:    Force the application to unmap previously mapped buffer memory
-                before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
-                all the applications support this feature. This parameter is
-                specific for each detected camera.
-                0 = do not force memory unmapping
-                1 = force memory unmapping (save memory)
-Default:        0
--------------------------------------------------------------------------------
-Name:           frame_timeout
-Type:           uint array (min = 0, max = 64)
-Syntax:         <n[,...]>
-Description:    Timeout for a video frame in seconds. This parameter is
-                specific for each detected camera. This parameter can be
-                changed at runtime thanks to the /sys filesystem interface.
-Default:        2
--------------------------------------------------------------------------------
-Name:           debug
-Type:           ushort
-Syntax:         <n>
-Description:    Debugging information level, from 0 to 3:
-                0 = none (use carefully)
-                1 = critical errors
-                2 = significant informations
-                3 = more verbose messages
-                Level 3 is useful for testing only, when only one device
-                is used at the same time. It also shows some more informations
-                about the hardware being detected. This module parameter can be
-                changed at runtime thanks to the /sys filesystem interface.
-Default:        2
--------------------------------------------------------------------------------
-
-
-8. Supported devices
-====================
-None of the names of the companies as well as their products will be mentioned
-here. They have never collaborated with the author, so no advertising.
-
-From the point of view of a driver, what unambiguously identify a device are
-its vendor and product USB identifiers. Below is a list of known identifiers of
-devices mounting the ZC0301 Image Processor and Control Chips:
-
-Vendor ID  Product ID
----------  ----------
-0x041e     0x4017
-0x041e     0x401c
-0x041e     0x401e
-0x041e     0x4034
-0x041e     0x4035
-0x046d     0x08ae
-0x0ac8     0x0301
-0x10fd     0x8050
-
-The list above does not imply that all those devices work with this driver: up
-until now only the ones that mount the following image sensors are supported;
-kernel messages will always tell you whether this is the case:
-
-Model       Manufacturer
------       ------------
-PAS202BCB   PixArt Imaging, Inc.
-
-
-9. Notes for V4L2 application developers
-========================================
-This driver follows the V4L2 API specifications. In particular, it enforces two
-rules:
-
-- exactly one I/O method, either "mmap" or "read", is associated with each
-file descriptor. Once it is selected, the application must close and reopen the
-device to switch to the other I/O method;
-
-- although it is not mandatory, previously mapped buffer memory should always
-be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
-The same number of buffers as before will be allocated again to match the size
-of the new video frames, so you have to map the buffers again before any I/O
-attempts on them.
-
-
-10. Contact information
-=======================
-The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
-
-GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
-'FCE635A4'; the public 1024-bit key should be available at any keyserver;
-the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
-
-
-11. Credits
-===========
-- Informations about the chip internals needed to enable the I2C protocol have
-  been taken from the documentation of the ZC030x Video4Linux1 driver written
-  by Andrew Birkett <andy@nobugs.org>;
-- The initialization values of the ZC0301 controller connected to the PAS202BCB
-  image sensor have been taken from the SPCA5XX driver maintained by
-  Michel Xhaard <mxhaard@magic.fr>.