Merge remote-tracking branch 'asoc/topic/fsl' into asoc-next

3 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
new file mode 100644
index 000000000000..f2ae335670f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -0,0 +1,54 @@
+Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Freescale S/PDIF audio block is a stereo transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+
+Required properties:
+
+  - compatible : Compatible list, must contain "fsl,imx35-spdif".
+
+  - reg : Offset and length of the register set for the device.
+
+  - interrupts : Contains the spdif interrupt.
+
+  - dmas : Generic dma devicetree binding as described in
+  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"core"		The core clock of spdif controller
+	"rxtx<0-7>"	Clock source list for tx and rx clock.
+			This clock list should be identical to
+			the source list connecting to the spdif
+			clock mux in "SPDIF Transceiver Clock
+			Diagram" of SoC reference manual. It
+			can also be referred to TxClk_Source
+			bit of register SPDIF_STC.
+
+Example:
+
+spdif: spdif@02004000 {
+	compatible = "fsl,imx35-spdif";
+	reg = <0x02004000 0x4000>;
+	interrupts = <0 52 0x04>;
+	dmas = <&sdma 14 18 0>,
+	       <&sdma 15 18 0>;
+	dma-names = "rx", "tx";
+
+	clocks = <&clks 197>, <&clks 3>,
+	       <&clks 197>, <&clks 107>,
+	       <&clks 0>, <&clks 118>,
+	       <&clks 62>, <&clks 139>,
+	       <&clks 0>;
+	clock-names = "core", "rxtx0",
+		"rxtx1", "rxtx2",
+		"rxtx3", "rxtx4",
+		"rxtx5", "rxtx6",
+		"rxtx7";
+
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 5ff76c9c57d2..4303b6ab6208 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -43,10 +43,22 @@ Required properties:
                     together.  This would still allow different sample sizes,
                     but not different sample rates.
 
+Required are also ac97 link bindings if ac97 is used. See
+Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
+bindings.
+
 Optional properties:
 - codec-handle:     Phandle to a 'codec' node that defines an audio
                     codec connected to this SSI.  This node is typically
                     a child of an I2C or other control node.
+- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
+		    filter the codec stream. This is necessary for some boards
+		    where an incompatible codec is connected to this SSI, e.g.
+		    on pca100 and pcm043.
+- dmas:		    Generic dma devicetree binding as described in
+		    Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
+		    is not defined.
 
 Child 'codec' node required properties:
 - compatible:       Compatible list, contains the name of the codec
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt
index 215aa9817213..f88a00e54c63 100644
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt
@@ -5,6 +5,15 @@ Required properties:
   or "fsl,imx31-audmux" for the version firstly used on i.MX31.
 - reg : Should contain AUDMUX registers location and length
 
+An initial configuration can be setup using child nodes.
+
+Required properties of optional child nodes:
+- fsl,audmux-port : Integer of the audmux port that is configured by this
+  child node.
+- fsl,port-config : List of configuration options for the specific port. For
+  imx31-audmux and above, it is a list of tuples <ptcr pdcr>. For
+  imx21-audmux it is a list of pcr values.
+
 Example:
 
 audmux@021d8000 {