Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...

12 files changed, 556 insertions, 83 deletions

diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
new file mode 100644
index 000000000000..281ecc5f9709
--- /dev/null
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -0,0 +1,90 @@
+What:		/dev/kmsg
+Date:		Mai 2012
+KernelVersion:	3.5
+Contact:	Kay Sievers <kay@vrfy.org>
+Description:	The /dev/kmsg character device node provides userspace access
+		to the kernel's printk buffer.
+
+		Injecting messages:
+		Every write() to the opened device node places a log entry in
+		the kernel's printk buffer.
+
+		The logged line can be prefixed with a <N> syslog prefix, which
+		carries the syslog priority and facility. The single decimal
+		prefix number is composed of the 3 lowest bits being the syslog
+		priority and the higher bits the syslog facility number.
+
+		If no prefix is given, the priority number is the default kernel
+		log priority and the facility number is set to LOG_USER (1). It
+		is not possible to inject messages from userspace with the
+		facility number LOG_KERN (0), to make sure that the origin of
+		the messages can always be reliably determined.
+
+		Accessing the buffer:
+		Every read() from the opened device node receives one record
+		of the kernel's printk buffer.
+
+		The first read() directly following an open() always returns
+		first message in the buffer; there is no kernel-internal
+		persistent state; many readers can concurrently open the device
+		and read from it, without affecting other readers.
+
+		Every read() will receive the next available record. If no more
+		records are available read() will block, or if O_NONBLOCK is
+		used -EAGAIN returned.
+
+		Messages in the record ring buffer get overwritten as whole,
+		there are never partial messages received by read().
+
+		In case messages get overwritten in the circular buffer while
+		the device is kept open, the next read() will return -EPIPE,
+		and the seek position be updated to the next available record.
+		Subsequent reads() will return available records again.
+
+		Unlike the classic syslog() interface, the 64 bit record
+		sequence numbers allow to calculate the amount of lost
+		messages, in case the buffer gets overwritten. And they allow
+		to reconnect to the buffer and reconstruct the read position
+		if needed, without limiting the interface to a single reader.
+
+		The device supports seek with the following parameters:
+		SEEK_SET, 0
+		  seek to the first entry in the buffer
+		SEEK_END, 0
+		  seek after the last entry in the buffer
+		SEEK_DATA, 0
+		  seek after the last record available at the time
+		  the last SYSLOG_ACTION_CLEAR was issued.
+
+		The output format consists of a prefix carrying the syslog
+		prefix including priority and facility, the 64 bit message
+		sequence number and the monotonic timestamp in microseconds.
+		The values are separated by a ','. Future extensions might
+		add more comma separated values before the terminating ';'.
+		Unknown values should be gracefully ignored.
+
+		The human readable text string starts directly after the ';'
+		and is terminated by a '\n'. Untrusted values derived from
+		hardware or other facilities are printed, therefore
+		all non-printable characters in the log message are escaped
+		by "\x00" C-style hex encoding.
+
+		A line starting with ' ', is a continuation line, adding
+		key/value pairs to the log message, which provide the machine
+		readable context of the message, for reliable processing in
+		userspace.
+
+		Example:
+		7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		 SUBSYSTEM=acpi
+		 DEVICE=+acpi:PNP0A03:00
+		6,339,5140900;NET: Registered protocol family 10
+		30,340,5690716;udevd[80]: starting version 181
+
+		The DEVICE= key uniquely identifies devices the following way:
+		  b12:8        - block dev_t
+		  c127:3       - char dev_t
+		  n8           - netdev ifindex
+		  +sound:card0 - subsystem:devname
+
+Users:		dmesg(1), userspace kernel log consumers
diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon
new file mode 100644
index 000000000000..20ab361bd8c6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-extcon
@@ -0,0 +1,97 @@
+What:		/sys/class/extcon/.../
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the extcon objects.
+		This allows accessing extcon specific variables.
+		The name of extcon object denoted as ... is the name given
+		with extcon_dev_register.
+
+		One extcon device denotes a single external connector
+		port. An external connector may have multiple cables
+		attached simultaneously. Many of docks, cradles, and
+		accessory cables have such capability. For example,
+		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
+		may have both HDMI and Charger attached, or analog audio,
+		video, and USB cables attached simulteneously.
+
+		If there are cables mutually exclusive with each other,
+		such binary relations may be expressed with extcon_dev's
+		mutually_exclusive array.
+
+What:		/sys/class/extcon/.../name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../name shows the name of the extcon
+		object. If the extcon object has an optional callback
+		"show_name" defined, the callback will provide the name with
+		this sysfs node.
+
+What:		/sys/class/extcon/.../state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../state shows and stores the cable
+		attach/detach information of the corresponding extcon object.
+		If the extcon object has an optional callback "show_state"
+		defined, the showing function is overriden with the optional
+		callback.
+
+		If the default callback for showing function is used, the
+		format is like this:
+		# cat state
+		USB_OTG=1
+		HDMI=0
+		TA=1
+		EAR_JACK=0
+		#
+		In this example, the extcon device have USB_OTG and TA
+		cables attached and HDMI and EAR_JACK cables detached.
+
+		In order to update the state of an extcon device, enter a hex
+		state number starting with 0x.
+		 echo 0xHEX > state
+
+		This updates the whole state of the extcon dev.
+		Inputs of all the methods are required to meet the
+		mutually_exclusive contidions if they exist.
+
+		It is recommended to use this "global" state interface if
+		you need to enter the value atomically. The later state
+		interface associated with each cable cannot update
+		multiple cable states of an extcon device simultaneously.
+
+What:		/sys/class/extcon/.../cable.x/name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows the name of cable
+		"x" (integer between 0 and 31) of an extcon device.
+
+What:		/sys/class/extcon/.../cable.x/state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.x/name shows and stores the
+		state of cable "x" (integer between 0 and 31) of an extcon
+		device. The state value is either 0 (detached) or 1
+		(attached).
+
+What:		/sys/class/extcon/.../mutually_exclusive/...
+Date:		December 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Shows the relations of mutually exclusiveness. For example,
+		if the mutually_exclusive array of extcon_dev is
+		{0x3, 0x5, 0xC, 0x0}, the, the output is:
+		# ls mutually_exclusive/
+		0x3
+		0x5
+		0xc
+		#
+
+		Note that mutually_exclusive is a sub-directory of the extcon
+		device and the file names under the mutually_exclusive
+		directory show the mutually-exclusive sets, not the contents
+		of the files.
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index f7ade3b3b40d..59c080f084ef 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 2.6.x kernel tree
-  - 2.6.x.y -stable kernel tree
-  - 2.6.x -git kernel patches
+  - main 3.x kernel tree
+  - 3.x.y -stable kernel tree
+  - 3.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 2.6.x -next kernel tree for integration tests
+  - the 3.x -next kernel tree for integration tests
 
-2.6.x kernel tree
+3.x kernel tree
 -----------------
-2.6.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+3.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-2.6.x.y -stable kernel tree
+3.x.y -stable kernel tree
 ---------------------------
-Kernels with 4-part versions are -stable kernels. They contain
+Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 2.6.x kernel.
+regressions discovered in a given 3.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+If no 3.x.y kernel is available, then the highest numbered 3.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-2.6.x -git patches
+3.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,13 +317,13 @@ revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-2.6.x -next kernel tree for integration tests
+3.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 2.6.x
+Before updates from subsystem trees are merged into the mainline 3.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:
-	http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+	http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
 	http://linux.f-seidel.de/linux-next/pmwiki/
 
 This way, the -next kernel gives a summary outlook onto what will be
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 00383186d8fb..5941f5136c6b 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -98,7 +98,8 @@ Your cooperation is appreciated.
 		  8 = /dev/random	Nondeterministic random number gen.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asynchronous I/O notification interface
-		 11 = /dev/kmsg		Writes to this come out as printk's
+		 11 = /dev/kmsg		Writes to this come out as printk's, reads
+					export the buffered printk records.
 		 12 = /dev/oldmem	Used by crashdump kernels to access
 					the memory of the kernel that crashed.
 
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
new file mode 100644
index 000000000000..c25a0a55151d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -0,0 +1,16 @@
+NVIDIA Tegra20 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra20-mc"
+- reg : Should contain 2 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  GART registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	mc {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <0 77 0x04>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
new file mode 100644
index 000000000000..e47e73f612f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
@@ -0,0 +1,18 @@
+NVIDIA Tegra30 MC(Memory Controller)
+
+Required properties:
+- compatible : "nvidia,tegra30-mc"
+- reg : Should contain 4 register ranges(address and length); see the
+  example below. Note that the MC registers are interleaved with the
+  SMMU registers, and hence must be represented as multiple ranges.
+- interrupts : Should contain MC General interrupt.
+
+Example:
+	mc {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x010
+		       0x7000f03c 0x1b4
+		       0x7000f200 0x028
+		       0x7000f284 0x17c>;
+		interrupts = <0 77 0x04>;
+	};
diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
index 74e6c7782678..6e1684981da2 100644
--- a/Documentation/dynamic-debug-howto.txt
+++ b/Documentation/dynamic-debug-howto.txt
@@ -2,17 +2,17 @@
 Introduction
 ============
 
-This document describes how to use the dynamic debug (ddebug) feature.
+This document describes how to use the dynamic debug (dyndbg) feature.
 
-Dynamic debug is designed to allow you to dynamically enable/disable kernel
-code to obtain additional kernel information. Currently, if
-CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can be
-dynamically enabled per-callsite.
+Dynamic debug is designed to allow you to dynamically enable/disable
+kernel code to obtain additional kernel information.  Currently, if
+CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() calls can
+be dynamically enabled per-callsite.
 
 Dynamic debug has even more useful features:
 
- * Simple query language allows turning on and off debugging statements by
-   matching any combination of 0 or 1 of:
+ * Simple query language allows turning on and off debugging
+   statements by matching any combination of 0 or 1 of:
 
    - source filename
    - function name
@@ -20,17 +20,19 @@ Dynamic debug has even more useful features:
    - module name
    - format string
 
- * Provides a debugfs control file: <debugfs>/dynamic_debug/control which can be
-   read to display the complete list of known debug statements, to help guide you
+ * Provides a debugfs control file: <debugfs>/dynamic_debug/control
+   which can be read to display the complete list of known debug
+   statements, to help guide you
 
 Controlling dynamic debug Behaviour
 ===================================
 
 The behaviour of pr_debug()/dev_dbg()s are controlled via writing to a
-control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
-filesystem, in order to make use of this feature. Subsequently, we refer to the
-control file as: <debugfs>/dynamic_debug/control. For example, if you want to
-enable printing from source file 'svcsock.c', line 1603 you simply do:
+control file in the 'debugfs' filesystem. Thus, you must first mount
+the debugfs filesystem, in order to make use of this feature.
+Subsequently, we refer to the control file as:
+<debugfs>/dynamic_debug/control. For example, if you want to enable
+printing from source file 'svcsock.c', line 1603 you simply do:
 
 nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
@@ -44,15 +46,15 @@ nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
 Viewing Dynamic Debug Behaviour
 ===========================
 
-You can view the currently configured behaviour of all the debug statements
-via:
+You can view the currently configured behaviour of all the debug
+statements via:
 
 nullarbor:~ # cat <debugfs>/dynamic_debug/control
 # filename:lineno [module]function flags format
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline       : %d\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth         : %d\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests     : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline       : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth         : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests     : %d\012"
 ...
 
 
@@ -65,12 +67,12 @@ nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
 nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
 42
 
-Note in particular that the third column shows the enabled behaviour
-flags for each debug statement callsite (see below for definitions of the
-flags).  The default value, no extra behaviour enabled, is "-".  So
-you can view all the debug statement callsites with any non-default flags:
+The third column shows the currently enabled flags for each debug
+statement callsite (see below for definitions of the flags).  The
+default value, with no flags enabled, is "=_".  So you can view all
+the debug statement callsites with any non-default flags:
 
-nullarbor:~ # awk '$3 != "-"' <debugfs>/dynamic_debug/control
+nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
 # filename:lineno [module]function flags format
 /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
 
@@ -103,15 +105,14 @@ specifications, followed by a flags change specification.
 
 command ::= match-spec* flags-spec
 
-The match-spec's are used to choose a subset of the known dprintk()
+The match-spec's are used to choose a subset of the known pr_debug()
 callsites to which to apply the flags-spec.  Think of them as a query
 with implicit ANDs between each pair.  Note that an empty list of
-match-specs is possible, but is not very useful because it will not
-match any debug statement callsites.
+match-specs will select all debug statement callsites.
 
-A match specification comprises a keyword, which controls the attribute
-of the callsite to be compared, and a value to compare against.  Possible
-keywords are:
+A match specification comprises a keyword, which controls the
+attribute of the callsite to be compared, and a value to compare
+against.  Possible keywords are:
 
 match-spec ::= 'func' string |
 	       'file' string |
@@ -164,15 +165,15 @@ format
     characters (") or single quote characters (').
     Examples:
 
-    format svcrdma:	    // many of the NFS/RDMA server dprintks
-    format readahead	    // some dprintks in the readahead cache
+    format svcrdma:	    // many of the NFS/RDMA server pr_debugs
+    format readahead	    // some pr_debugs in the readahead cache
     format nfsd:\040SETATTR // one way to match a format with whitespace
     format "nfsd: SETATTR"  // a neater way to match a format with whitespace
     format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
 
 line
     The given line number or range of line numbers is compared
-    against the line number of each dprintk() callsite.  A single
+    against the line number of each pr_debug() callsite.  A single
     line number matches the callsite line number exactly.  A
     range of line numbers matches any callsite between the first
     and last line number inclusive.  An empty first number means
@@ -188,51 +189,93 @@ The flags specification comprises a change operation followed
 by one or more flag characters.  The change operation is one
 of the characters:
 
--
-    remove the given flags
-
-+
-    add the given flags
-
-=
-    set the flags to the given flags
+  -    remove the given flags
+  +    add the given flags
+  =    set the flags to the given flags
 
 The flags are:
 
-f
-    Include the function name in the printed message
-l
-    Include line number in the printed message
-m
-    Include module name in the printed message
-p
-    Causes a printk() message to be emitted to dmesg
-t
-    Include thread ID in messages not generated from interrupt context
+  p    enables the pr_debug() callsite.
+  f    Include the function name in the printed message
+  l    Include line number in the printed message
+  m    Include module name in the printed message
+  t    Include thread ID in messages not generated from interrupt context
+  _    No flags are set. (Or'd with others on input)
+
+For display, the flags are preceded by '='
+(mnemonic: what the flags are currently equal to).
 
-Note the regexp ^[-+=][flmpt]+$ matches a flags specification.
-Note also that there is no convenient syntax to remove all
-the flags at once, you need to use "-flmpt".
+Note the regexp ^[-+=][flmpt_]+$ matches a flags specification.
+To clear all flags at once, use "=_" or "-flmpt".
 
 
-Debug messages during boot process
+Debug messages during Boot Process
 ==================================
 
-To be able to activate debug messages during the boot process,
-even before userspace and debugfs exists, use the boot parameter:
-ddebug_query="QUERY"
+To activate debug messages for core code and built-in modules during
+the boot process, even before userspace and debugfs exists, use
+dyndbg="QUERY", module.dyndbg="QUERY", or ddebug_query="QUERY"
+(ddebug_query is obsoleted by dyndbg, and deprecated).  QUERY follows
+the syntax described above, but must not exceed 1023 characters.  Your
+bootloader may impose lower limits.
+
+These dyndbg params are processed just after the ddebug tables are
+processed, as part of the arch_initcall.  Thus you can enable debug
+messages in all code run after this arch_initcall via this boot
+parameter.
 
-QUERY follows the syntax described above, but must not exceed 1023
-characters. The enablement of debug messages is done as an arch_initcall.
-Thus you can enable debug messages in all code processed after this
-arch_initcall via this boot parameter.
 On an x86 system for example ACPI enablement is a subsys_initcall and
-ddebug_query="file ec.c +p"
+   dyndbg="file ec.c +p"
 will show early Embedded Controller transactions during ACPI setup if
 your machine (typically a laptop) has an Embedded Controller.
 PCI (or other devices) initialization also is a hot candidate for using
 this boot parameter for debugging purposes.
 
+If foo module is not built-in, foo.dyndbg will still be processed at
+boot time, without effect, but will be reprocessed when module is
+loaded later.  dyndbg_query= and bare dyndbg= are only processed at
+boot.
+
+
+Debug Messages at Module Initialization Time
+============================================
+
+When "modprobe foo" is called, modprobe scans /proc/cmdline for
+foo.params, strips "foo.", and passes them to the kernel along with
+params given in modprobe args or /etc/modprob.d/*.conf files,
+in the following order:
+
+1. # parameters given via /etc/modprobe.d/*.conf
+   options foo dyndbg=+pt
+   options foo dyndbg # defaults to +p
+
+2. # foo.dyndbg as given in boot args, "foo." is stripped and passed
+   foo.dyndbg=" func bar +p; func buz +mp"
+
+3. # args to modprobe
+   modprobe foo dyndbg==pmf # override previous settings
+
+These dyndbg queries are applied in order, with last having final say.
+This allows boot args to override or modify those from /etc/modprobe.d
+(sensible, since 1 is system wide, 2 is kernel or boot specific), and
+modprobe args to override both.
+
+In the foo.dyndbg="QUERY" form, the query must exclude "module foo".
+"foo" is extracted from the param-name, and applied to each query in
+"QUERY", and only 1 match-spec of each type is allowed.
+
+The dyndbg option is a "fake" module parameter, which means:
+
+- modules do not need to define it explicitly
+- every module gets it tacitly, whether they use pr_debug or not
+- it doesnt appear in /sys/module/$module/parameters/
+  To see it, grep the control file, or inspect /proc/cmdline.
+
+For CONFIG_DYNAMIC_DEBUG kernels, any settings given at boot-time (or
+enabled by -DDEBUG flag during compilation) can be disabled later via
+the sysfs interface if the debug messages are no longer needed:
+
+   echo "module module_name -p" > <debugfs>/dynamic_debug/control
 
 Examples
 ========
@@ -260,3 +303,18 @@ nullarbor:~ # echo -n 'func svc_process -p' >
 // enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
 nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
 				<debugfs>/dynamic_debug/control
+
+// enable all messages
+nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control
+
+// add module, function to all enabled messages
+nullarbor:~ # echo -n '+mf' > <debugfs>/dynamic_debug/control
+
+// boot-args example, with newlines and comments for readability
+Kernel command line: ...
+  // see whats going on in dyndbg=value processing
+  dynamic_debug.verbose=1
+  // enable pr_debugs in 2 builtins, #cmt is stripped
+  dyndbg="module params +p #cmt ; module sys +p"
+  // enable pr_debugs in 2 functions in a module loaded later
+  pc87360.dyndbg="func pc87360_init_device +p; func pc87360_find +p"
diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class
new file mode 100644
index 000000000000..eb0fa5f4fe88
--- /dev/null
+++ b/Documentation/extcon/porting-android-switch-class
@@ -0,0 +1,124 @@
+
+	Staging/Android Switch Class Porting Guide
+	(linux/drivers/staging/android/switch)
+	(c) Copyright 2012 Samsung Electronics
+
+AUTHORS
+MyungJoo Ham <myungjoo.ham@samsung.com>
+
+/*****************************************************************
+ * CHAPTER 1.                                                    *
+ * PORTING SWITCH CLASS DEVICE DRIVERS                           *
+ *****************************************************************/
+
+****** STEP 1. Basic Functionality
+	No extcon extended feature, but switch features only.
+
+- struct switch_dev (fed to switch_dev_register/unregister)
+    @name: no change
+    @dev: no change
+    @index: drop (not used in switch device driver side anyway)
+    @state: no change
+	If you have used @state with magic numbers, keep it
+	at this step.
+    @print_name: no change but type change (switch_dev->extcon_dev)
+    @print_state: no change but type change (switch_dev->extcon_dev)
+
+- switch_dev_register(sdev, dev)
+	=> extcon_dev_register(edev, dev)
+	: no change but type change (sdev->edev)
+- switch_dev_unregister(sdev)
+	=> extcon_dev_unregister(edev)
+	: no change but type change (sdev->edev)
+- switch_get_state(sdev)
+	=> extcon_get_state(edev)
+	: no change but type change (sdev->edev) and (return: int->u32)
+- switch_set_state(sdev, state)
+	=> extcon_set_state(edev, state)
+	: no change but type change (sdev->edev) and (state: int->u32)
+
+With this changes, the ex-switch extcon class device works as it once
+worked as switch class device. However, it will now have additional
+interfaces (both ABI and in-kernel API) and different ABI locations.
+However, if CONFIG_ANDROID is enabled without CONFIG_ANDROID_SWITCH,
+/sys/class/switch/* will be symbolically linked to /sys/class/extcon/
+so that they are still compatible with legacy userspace processes.
+
+****** STEP 2. Multistate (no more magic numbers in state value)
+	Extcon's extended features for switch device drivers with
+	complex features usually required magic numbers in state
+	value of switch_dev. With extcon, such magic numbers that
+	support multiple cables (
+
+  1. Define cable names at edev->supported_cable.
+  2. (Recommended) remove print_state callback.
+  3. Use extcon_get_cable_state_(edev, index) or
+   extcon_get_cable_state(edev, cable_name) instead of
+   extcon_get_state(edev) if you intend to get a state of a specific
+   cable. Same for set_state. This way, you can remove the usage of
+   magic numbers in state value.
+  4. Use extcon_update_state() if you are updating specific bits of
+   the state value.
+
+Example: a switch device driver w/ magic numbers for two cables.
+	"0x00": no cables connected.
+	"0x01": cable 1 connected
+	"0x02": cable 2 connected
+	"0x03": cable 1 and 2 connected
+  1. edev->supported_cable = {"1", "2", NULL};
+  2. edev->print_state = NULL;
+  3. extcon_get_cable_state_(edev, 0) shows cable 1's state.
+     extcon_get_cable_state(edev, "1") shows cable 1's state.
+     extcon_set_cable_state_(edev, 1) sets cable 2's state.
+     extcon_set_cable_state(edev, "2") sets cable 2's state
+  4. extcon_update_state(edev, 0x01, 0) sets the least bit's 0.
+
+****** STEP 3. Notify other device drivers
+
+  You can notify others of the cable attach/detach events with
+notifier chains.
+
+  At the side of other device drivers (the extcon device itself
+does not need to get notified of its own events), there are two
+methods to register notifier_block for cable events:
+(a) for a specific cable or (b) for every cable.
+
+  (a) extcon_register_interest(obj, extcon_name, cable_name, nb)
+	Example: want to get news of "MAX8997_MUIC"'s "USB" cable
+
+	obj = kzalloc(sizeof(struct extcon_specific_cable_nb),
+		      GFP_KERNEL);
+	nb->notifier_call = the_callback_to_handle_usb;
+
+	extcon_register_intereset(obj, "MAX8997_MUIC", "USB", nb);
+
+  (b) extcon_register_notifier(edev, nb)
+	Call nb for any changes in edev.
+
+  Please note that in order to properly behave with method (a),
+the extcon device driver should support multistate feature (STEP 2).
+
+****** STEP 4. Inter-cable relation (mutually exclusive)
+
+  You can provide inter-cable mutually exclusiveness information
+for an extcon device. When cables A and B are declared to be mutually
+exclusive, the two cables cannot be in ATTACHED state simulteneously.
+
+
+/*****************************************************************
+ * CHAPTER 2.                                                    *
+ * PORTING USERSPACE w/ SWITCH CLASS DEVICE SUPPORT              *
+ *****************************************************************/
+
+****** ABI Location
+
+  If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is
+disabled, /sys/class/switch/* are created as symbolic links to
+/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates
+/sys/class/switch directory, we disable symboling linking if
+CONFIG_ANDROID_SWITCH is enabled.
+
+  The two files of switch class, name and state, are provided with
+extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is
+not enabled or print_state callback is supplied, the output of
+state ABI is same with switch class.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index e4b57756b9f5..e9abede594e1 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -2,7 +2,14 @@ The following is a list of files and features that are going to be
 removed in the kernel source tree.  Every entry should contain what
 exactly is going away, why it is happening, and who is going to be doing
 the work.  When the feature is removed from the kernel, it should also
-be removed from this file.
+be removed from this file.  The suggested deprecation period is 3 releases.
+
+---------------------------
+
+What:	ddebug_query="query" boot cmdline param
+When:	v3.8
+Why:	obsoleted by dyndbg="query" and module.dyndbg="query"
+Who:	Jim Cromie <jim.cromie@gmail.com>, Jason Baron <jbaron@redhat.com>
 
 ---------------------------
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e275432ef2c7..62aba89b04a2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -611,7 +611,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
 			time. See Documentation/dynamic-debug-howto.txt for
-			details.
+			details.  Deprecated, see dyndbg.
 
 	debug		[KNL] Enable kernel debugging (events log level).
 
@@ -731,6 +731,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	dscc4.setup=	[NET]
 
+	dyndbg[="val"]		[KNL,DYNAMIC_DEBUG]
+	module.dyndbg[="val"]
+			Enable debug messages at boot time.  See
+			Documentation/dynamic-debug-howto.txt for details.
+
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
diff --git a/Documentation/memory-devices/ti-emif.txt b/Documentation/memory-devices/ti-emif.txt
new file mode 100644
index 000000000000..f4ad9a7d0f4b
--- /dev/null
+++ b/Documentation/memory-devices/ti-emif.txt
@@ -0,0 +1,57 @@
+TI EMIF SDRAM Controller Driver:
+
+Author
+========
+Aneesh V <aneesh@ti.com>
+
+Location
+============
+driver/memory/emif.c
+
+Supported SoCs:
+===================
+TI OMAP44xx
+TI OMAP54xx
+
+Menuconfig option:
+==========================
+Device Drivers
+	Memory devices
+		Texas Instruments EMIF driver
+
+Description
+===========
+This driver is for the EMIF module available in Texas Instruments
+SoCs. EMIF is an SDRAM controller that, based on its revision,
+supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+This driver takes care of only LPDDR2 memories presently. The
+functions of the driver includes re-configuring AC timing
+parameters and other settings during frequency, voltage and
+temperature changes
+
+Platform Data (see include/linux/platform_data/emif_plat.h):
+=====================================================================
+DDR device details and other board dependent and SoC dependent
+information can be passed through platform data (struct emif_platform_data)
+- DDR device details: 'struct ddr_device_info'
+- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
+- Custom configurations: customizable policy options through
+  'struct emif_custom_configs'
+- IP revision
+- PHY type
+
+Interface to the external world:
+================================
+EMIF driver registers notifiers for voltage and frequency changes
+affecting EMIF and takes appropriate actions when these are invoked.
+- freq_pre_notify_handling()
+- freq_post_notify_handling()
+- volt_notify_handling()
+
+Debugfs
+========
+The driver creates two debugfs entries per device.
+- regcache_dump : dump of register values calculated and saved for all
+  frequencies used so far.
+- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
+  indicates the current temperature level of the device.
diff --git a/Documentation/zh_CN/magic-number.txt b/Documentation/zh_CN/magic-number.txt
index f606ba8598cf..4263022f5002 100644
--- a/Documentation/zh_CN/magic-number.txt
+++ b/Documentation/zh_CN/magic-number.txt
@@ -160,7 +160,7 @@ QUEUE_MAGIC_USED      0xf7e1cc33  queue_entry       drivers/scsi/arm/queue.c
 HTB_CMAGIC            0xFEFAFEF1  htb_class         net/sched/sch_htb.c
 NMI_MAGIC             0x48414d4d455201 nmi_s        arch/mips/include/asm/sn/nmi.h
 
-请注意，在声音记忆管理中仍然有每一些被定义的驱动魔术值。查看include/sound/sndmagic.h来获取他们完整的列表信息。很多OSS声音驱动拥有自己从声卡PCI ID构建的魔术值-他们也没有被列在这里。
+请注意，在声音记忆管理中仍然有一些特殊的为每个驱动定义的魔术值。查看include/sound/sndmagic.h来获取他们完整的列表信息。很多OSS声音驱动拥有自己从声卡PCI ID构建的魔术值-他们也没有被列在这里。
 
 IrDA子系统也使用了大量的自己的魔术值，查看include/net/irda/irda.h来获取他们完整的信息。