Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/cadence/macb.c

Overlapping changes in macb driver, mostly fixes and cleanups
in 'net' overlapping with the integration of at91_ether into
macb in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 65 insertions, 6 deletions

diff --git a/Documentation/CodeOfConflict b/Documentation/CodeOfConflict
new file mode 100644
index 000000000000..1684d0b4efa6
--- /dev/null
+++ b/Documentation/CodeOfConflict
@@ -0,0 +1,27 @@
+Code of Conflict
+----------------
+
+The Linux kernel development effort is a very personal process compared
+to "traditional" ways of developing software.  Your code and ideas
+behind it will be carefully reviewed, often resulting in critique and
+criticism.  The review will almost always require improvements to the
+code before it can be included in the kernel.  Know that this happens
+because everyone involved wants to see the best possible solution for
+the overall success of Linux.  This development process has been proven
+to create the most robust operating system kernel ever, and we do not
+want to do anything to cause the quality of submission and eventual
+result to ever decrease.
+
+If however, anyone feels personally abused, threatened, or otherwise
+uncomfortable due to this process, that is not acceptable.  If so,
+please contact the Linux Foundation's Technical Advisory Board at
+<tab@lists.linux-foundation.org>, or the individual members, and they
+will work to resolve the issue to the best of their ability.  For more
+information on who is on the Technical Advisory Board and what their
+role is, please see:
+	http://www.linuxfoundation.org/programs/advisory-councils/tab
+
+As a reviewer of code, please strive to keep things civil and focused on
+the technical issues involved.  We are all humans, and frustrations can
+be high on both sides of the process.  Try to keep in mind the immortal
+words of Bill and Ted, "Be excellent to each other."
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index 52d37fd8d3e5..ce4311d726ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -7,6 +7,7 @@ Required properties:
   - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
 - reg : Should contain I2C/HS-I2C registers location and length
 - interrupts : Should contain I2C/HS-I2C interrupt
+- clocks : Should contain the I2C/HS-I2C clock specifier
 
 Optional properties:
 - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
index cfcc52705ed8..6151999c5dca 100644
--- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
 APM X-Gene SoC.
 
 Required properties for all the ethernet interfaces:
-- compatible: Should be "apm,xgene-enet"
+- compatible: Should state binding information from the following list,
+  - "apm,xgene-enet":    RGMII based 1G interface
+  - "apm,xgene1-sgenet": SGMII based 1G interface
+  - "apm,xgene1-xgenet": XFI based 10G interface
 - reg: Address and length of the register set for the device. It contains the
   information of registers in the same order as described by reg-names
 - reg-names: Should contain the register set names
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
index 7f76214f728a..289c40ed7470 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
@@ -21,6 +21,18 @@ Optional properties:
 - reg-io-width : the size (in bytes) of the IO accesses that should be
   performed on the device.  If this property is not present then single byte
   accesses are used.
+- dcd-override : Override the DCD modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- dsr-override : Override the DTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- cts-override : Override the CTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- ri-override : Override the RI modem status signal. This signal will always be
+  reported as inactive instead of being obtained from the modem status register.
+  Define this if your serial port does not use this pin.
 
 Example:
 
@@ -31,6 +43,10 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		dcd-override;
+		dsr-override;
+		cts-override;
+		ri-override;
 	};
 
 Example with one clock:
diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt
index 2f9c5a5fcb25..8afb29a8604a 100644
--- a/Documentation/power/suspend-and-interrupts.txt
+++ b/Documentation/power/suspend-and-interrupts.txt
@@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts.
 
 The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
 requesting a special-purpose interrupt.  It causes suspend_device_irqs() to
-leave the corresponding IRQ enabled so as to allow the interrupt to work all
-the time as expected.
+leave the corresponding IRQ enabled so as to allow the interrupt to work as
+expected during the suspend-resume cycle, but does not guarantee that the
+interrupt will wake the system from a suspended state -- for such cases it is
+necessary to use enable_irq_wake().
 
 Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
 user of it.  Thus, if the IRQ is shared, all of the interrupt handlers installed
@@ -110,8 +112,9 @@ any special interrupt handling logic for it to work.
 IRQF_NO_SUSPEND and enable_irq_wake()
 -------------------------------------
 
-There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND
-flag on the same IRQ.
+There are very few valid reasons to use both enable_irq_wake() and the
+IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
+same device.
 
 First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
 interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
@@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()).
 
 Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
 to individual interrupt handlers, so sharing an IRQ between a system wakeup
-interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
+interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
+make sense.
+
+In rare cases an IRQ can be shared between a wakeup device driver and an
+IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
+must be able to discern spurious IRQs from genuine wakeup events (signalling
+the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
+ensure that the IRQ will function as a wakeup source, and must request the IRQ
+with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
+these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.