Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt

7 files changed, 555 insertions, 482 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index e638e15a8895..97ad190e13af 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -41,6 +41,49 @@ Description:
 		for the device and attempt to bind to it.  For example:
 		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
 
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+		Depends on CONFIG_HOTPLUG.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>
@@ -52,3 +95,30 @@ Description:
 		that some devices may have malformatted data.  If the
 		underlying VPD has a writable section then the
 		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index bc962cda6504..58c194572c76 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -199,6 +199,7 @@ X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
 !Edrivers/pci/rom.c
+!Edrivers/pci/iov.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 256defd7e174..dcf7acc720e1 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -4,506 +4,356 @@
 	Revised Feb 12, 2004 by Martine Silbermann
 		email: Martine.Silbermann@hp.com
 	Revised Jun 25, 2004 by Tom L Nguyen
+	Revised Jul  9, 2008 by Matthew Wilcox <willy@linux.intel.com>
+		Copyright 2003, 2008 Intel Corporation
 
 1. About this guide
 
-This guide describes the basics of Message Signaled Interrupts (MSI),
-the advantages of using MSI over traditional interrupt mechanisms,
-and how to enable your driver to use MSI or MSI-X. Also included is
-a Frequently Asked Questions (FAQ) section.
-
-1.1 Terminology
-
-PCI devices can be single-function or multi-function.  In either case,
-when this text talks about enabling or disabling MSI on a "device
-function," it is referring to one specific PCI device and function and
-not to all functions on a PCI device (unless the PCI device has only
-one function).
-
-2. Copyright 2003 Intel Corporation
-
-3. What is MSI/MSI-X?
-
-Message Signaled Interrupt (MSI), as described in the PCI Local Bus
-Specification Revision 2.3 or later, is an optional feature, and a
-required feature for PCI Express devices. MSI enables a device function
-to request service by sending an Inbound Memory Write on its PCI bus to
-the FSB as a Message Signal Interrupt transaction. Because MSI is
-generated in the form of a Memory Write, all transaction conditions,
-such as a Retry, Master-Abort, Target-Abort or normal completion, are
-supported.
-
-A PCI device that supports MSI must also support pin IRQ assertion
-interrupt mechanism to provide backward compatibility for systems that
-do not support MSI. In systems which support MSI, the bus driver is
-responsible for initializing the message address and message data of
-the device function's MSI/MSI-X capability structure during device
-initial configuration.
-
-An MSI capable device function indicates MSI support by implementing
-the MSI/MSI-X capability structure in its PCI capability list. The
-device function may implement both the MSI capability structure and
-the MSI-X capability structure; however, the bus driver should not
-enable both.
-
-The MSI capability structure contains Message Control register,
-Message Address register and Message Data register. These registers
-provide the bus driver control over MSI. The Message Control register
-indicates the MSI capability supported by the device. The Message
-Address register specifies the target address and the Message Data
-register specifies the characteristics of the message. To request
-service, the device function writes the content of the Message Data
-register to the target address. The device and its software driver
-are prohibited from writing to these registers.
-
-The MSI-X capability structure is an optional extension to MSI. It
-uses an independent and separate capability structure. There are
-some key advantages to implementing the MSI-X capability structure
-over the MSI capability structure as described below.
-
-	- Support a larger maximum number of vectors per function.
-
-	- Provide the ability for system software to configure
-	each vector with an independent message address and message
-	data, specified by a table that resides in Memory Space.
-
-        - MSI and MSI-X both support per-vector masking. Per-vector
-	masking is an optional extension of MSI but a required
-	feature for MSI-X. Per-vector masking provides the kernel the
-	ability to mask/unmask a single MSI while running its
-	interrupt service routine. If per-vector masking is
-	not supported, then the device driver should provide the
-	hardware/software synchronization to ensure that the device
-	generates MSI when the driver wants it to do so.
-
-4. Why use MSI?
-
-As a benefit to the simplification of board design, MSI allows board
-designers to remove out-of-band interrupt routing. MSI is another
-step towards a legacy-free environment.
-
-Due to increasing pressure on chipset and processor packages to
-reduce pin count, the need for interrupt pins is expected to
-diminish over time. Devices, due to pin constraints, may implement
-messages to increase performance.
-
-PCI Express endpoints uses INTx emulation (in-band messages) instead
-of IRQ pin assertion. Using INTx emulation requires interrupt
-sharing among devices connected to the same node (PCI bridge) while
-MSI is unique (non-shared) and does not require BIOS configuration
-support. As a result, the PCI Express technology requires MSI
-support for better interrupt performance.
-
-Using MSI enables the device functions to support two or more
-vectors, which can be configured to target different CPUs to
-increase scalability.
-
-5. Configuring a driver to use MSI/MSI-X
-
-By default, the kernel will not enable MSI/MSI-X on all devices that
-support this capability. The CONFIG_PCI_MSI kernel option
-must be selected to enable MSI/MSI-X support.
-
-5.1 Including MSI/MSI-X support into the kernel
-
-To allow MSI/MSI-X capable device drivers to selectively enable
-MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described
-below), the VECTOR based scheme needs to be enabled by setting
-CONFIG_PCI_MSI during kernel config.
-
-Since the target of the inbound message is the local APIC, providing
-CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI.
-
-5.2 Configuring for MSI support
-
-Due to the non-contiguous fashion in vector assignment of the
-existing Linux kernel, this version does not support multiple
-messages regardless of a device function is capable of supporting
-more than one vector. To enable MSI on a device function's MSI
-capability structure requires a device driver to call the function
-pci_enable_msi() explicitly.
-
-5.2.1 API pci_enable_msi
+This guide describes the basics of Message Signaled Interrupts (MSIs),
+the advantages of using MSI over traditional interrupt mechanisms, how
+to change your driver to use MSI or MSI-X and some basic diagnostics to
+try if a device doesn't support MSIs.
 
-int pci_enable_msi(struct pci_dev *dev)
 
-With this new API, a device driver that wants to have MSI
-enabled on its device function must call this API to enable MSI.
-A successful call will initialize the MSI capability structure
-with ONE vector, regardless of whether a device function is
-capable of supporting multiple messages. This vector replaces the
-pre-assigned dev->irq with a new MSI vector. To avoid a conflict
-of the new assigned vector with existing pre-assigned vector requires
-a device driver to call this API before calling request_irq().
+2. What are MSIs?
 
-5.2.2 API pci_disable_msi
+A Message Signaled Interrupt is a write from the device to a special
+address which causes an interrupt to be received by the CPU.
 
-void pci_disable_msi(struct pci_dev *dev)
+The MSI capability was first specified in PCI 2.2 and was later enhanced
+in PCI 3.0 to allow each interrupt to be masked individually.  The MSI-X
+capability was also introduced with PCI 3.0.  It supports more interrupts
+per device than MSI and allows interrupts to be independently configured.
 
-This API should always be used to undo the effect of pci_enable_msi()
-when a device driver is unloading. This API restores dev->irq with
-the pre-assigned IOAPIC vector and switches a device's interrupt
-mode to PCI pin-irq assertion/INTx emulation mode.
-
-Note that a device driver should always call free_irq() on the MSI vector
-that it has done request_irq() on before calling this API. Failure to do
-so results in a BUG_ON() and a device will be left with MSI enabled and
-leaks its vector.
-
-5.2.3 MSI mode vs. legacy mode diagram
-
-The below diagram shows the events which switch the interrupt
-mode on the MSI-capable device function between MSI mode and
-PIN-IRQ assertion mode.
-
-	 ------------   pci_enable_msi 	 ------------------------
-	|	     | <===============	| 			 |
-	| MSI MODE   |	  	     	| PIN-IRQ ASSERTION MODE |
-	| 	     | ===============>	|			 |
- 	 ------------	pci_disable_msi  ------------------------
-
-
-Figure 1. MSI Mode vs. Legacy Mode
-
-In Figure 1, a device operates by default in legacy mode. Legacy
-in this context means PCI pin-irq assertion or PCI-Express INTx
-emulation. A successful MSI request (using pci_enable_msi()) switches
-a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector
-stored in dev->irq will be saved by the PCI subsystem and a new
-assigned MSI vector will replace dev->irq.
-
-To return back to its default mode, a device driver should always call
-pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a
-device driver should always call free_irq() on the MSI vector it has
-done request_irq() on before calling pci_disable_msi(). Failure to do
-so results in a BUG_ON() and a device will be left with MSI enabled and
-leaks its vector. Otherwise, the PCI subsystem restores a device's
-dev->irq with a pre-assigned IOAPIC vector and marks the released
-MSI vector as unused.
-
-Once being marked as unused, there is no guarantee that the PCI
-subsystem will reserve this MSI vector for a device. Depending on
-the availability of current PCI vector resources and the number of
-MSI/MSI-X requests from other drivers, this MSI may be re-assigned.
-
-For the case where the PCI subsystem re-assigns this MSI vector to
-another driver, a request to switch back to MSI mode may result
-in being assigned a different MSI vector or a failure if no more
-vectors are available.
-
-5.3 Configuring for MSI-X support
-
-Due to the ability of the system software to configure each vector of
-the MSI-X capability structure with an independent message address
-and message data, the non-contiguous fashion in vector assignment of
-the existing Linux kernel has no impact on supporting multiple
-messages on an MSI-X capable device functions. To enable MSI-X on
-a device function's MSI-X capability structure requires its device
-driver to call the function pci_enable_msix() explicitly.
-
-The function pci_enable_msix(), once invoked, enables either
-all or nothing, depending on the current availability of PCI vector
-resources. If the PCI vector resources are available for the number
-of vectors requested by a device driver, this function will configure
-the MSI-X table of the MSI-X capability structure of a device with
-requested messages. To emphasize this reason, for example, a device
-may be capable for supporting the maximum of 32 vectors while its
-software driver usually may request 4 vectors. It is recommended
-that the device driver should call this function once during the
-initialization phase of the device driver.
-
-Unlike the function pci_enable_msi(), the function pci_enable_msix()
-does not replace the pre-assigned IOAPIC dev->irq with a new MSI
-vector because the PCI subsystem writes the 1:1 vector-to-entry mapping
-into the field vector of each element contained in a second argument.
-Note that the pre-assigned IOAPIC dev->irq is valid only if the device
-operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at
-using dev->irq by the device driver to request for interrupt service
-may result in unpredictable behavior.
-
-For each MSI-X vector granted, a device driver is responsible for calling
-other functions like request_irq(), enable_irq(), etc. to enable
-this vector with its corresponding interrupt service handler. It is
-a device driver's choice to assign all vectors with the same
-interrupt service handler or each vector with a unique interrupt
-service handler.
-
-5.3.1 Handling MMIO address space of MSI-X Table
-
-The PCI 3.0 specification has implementation notes that MMIO address
-space for a device's MSI-X structure should be isolated so that the
-software system can set different pages for controlling accesses to the
-MSI-X structure. The implementation of MSI support requires the PCI
-subsystem, not a device driver, to maintain full control of the MSI-X
-table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X
-table/MSI-X PBA.  A device driver should not access the MMIO address
-space of the MSI-X table/MSI-X PBA.
-
-5.3.2 API pci_enable_msix
+Devices may support both MSI and MSI-X, but only one can be enabled at
+a time.
 
-int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
 
-This API enables a device driver to request the PCI subsystem
-to enable MSI-X messages on its hardware device. Depending on
-the availability of PCI vectors resources, the PCI subsystem enables
-either all or none of the requested vectors.
+3. Why use MSIs?
+
+There are three reasons why using MSIs can give an advantage over
+traditional pin-based interrupts.
+
+Pin-based PCI interrupts are often shared amongst several devices.
+To support this, the kernel must call each interrupt handler associated
+with an interrupt, which leads to reduced performance for the system as
+a whole.  MSIs are never shared, so this problem cannot arise.
+
+When a device writes data to memory, then raises a pin-based interrupt,
+it is possible that the interrupt may arrive before all the data has
+arrived in memory (this becomes more likely with devices behind PCI-PCI
+bridges).  In order to ensure that all the data has arrived in memory,
+the interrupt handler must read a register on the device which raised
+the interrupt.  PCI transaction ordering rules require that all the data
+arrives in memory before the value can be returned from the register.
+Using MSIs avoids this problem as the interrupt-generating write cannot
+pass the data writes, so by the time the interrupt is raised, the driver
+knows that all the data has arrived in memory.
+
+PCI devices can only support a single pin-based interrupt per function.
+Often drivers have to query the device to find out what event has
+occurred, slowing down interrupt handling for the common case.  With
+MSIs, a device can support more interrupts, allowing each interrupt
+to be specialised to a different purpose.  One possible design gives
+infrequent conditions (such as errors) their own interrupt which allows
+the driver to handle the normal interrupt handling path more efficiently.
+Other possible designs include giving one interrupt to each packet queue
+in a network card or each port in a storage controller.
+
+
+4. How to use MSIs
+
+PCI devices are initialised to use pin-based interrupts.  The device
+driver has to set up the device to use MSI or MSI-X.  Not all machines
+support MSIs correctly, and for those machines, the APIs described below
+will simply fail and the device will continue to use pin-based interrupts.
+
+4.1 Include kernel support for MSIs
+
+To support MSI or MSI-X, the kernel must be built with the CONFIG_PCI_MSI
+option enabled.  This option is only available on some architectures,
+and it may depend on some other options also being set.  For example,
+on x86, you must also enable X86_UP_APIC or SMP in order to see the
+CONFIG_PCI_MSI option.
+
+4.2 Using MSI
+
+Most of the hard work is done for the driver in the PCI layer.  It simply
+has to request that the PCI layer set up the MSI capability for this
+device.
+
+4.2.1 pci_enable_msi
+
+int pci_enable_msi(struct pci_dev *dev)
+
+A successful call will allocate ONE interrupt to the device, regardless
+of how many MSIs the device supports.  The device will be switched from
+pin-based interrupt mode to MSI mode.  The dev->irq number is changed
+to a new number which represents the message signaled interrupt.
+This function should be called before the driver calls request_irq()
+since enabling MSIs disables the pin-based IRQ and the driver will not
+receive interrupts on the old interrupt.
+
+4.2.2 pci_enable_msi_block
+
+int pci_enable_msi_block(struct pci_dev *dev, int count)
+
+This variation on the above call allows a device driver to request multiple
+MSIs.  The MSI specification only allows interrupts to be allocated in
+powers of two, up to a maximum of 2^5 (32).
+
+If this function returns 0, it has succeeded in allocating at least as many
+interrupts as the driver requested (it may have allocated more in order
+to satisfy the power-of-two requirement).  In this case, the function
+enables MSI on this device and updates dev->irq to be the lowest of
+the new interrupts assigned to it.  The other interrupts assigned to
+the device are in the range dev->irq to dev->irq + count - 1.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.  If this function returns a positive number, it will be
+less than 'count' and indicate the number of interrupts that could have
+been allocated.  In neither case will the irq value have been
+updated, nor will the device have been switched into MSI mode.
+
+The device driver must decide what action to take if
+pci_enable_msi_block() returns a value less than the number asked for.
+Some devices can make use of fewer interrupts than the maximum they
+request; in this case the driver should call pci_enable_msi_block()
+again.  Note that it is not guaranteed to succeed, even when the
+'count' has been reduced to the value returned from a previous call to
+pci_enable_msi_block().  This is because there are multiple constraints
+on the number of vectors that can be allocated; pci_enable_msi_block()
+will return as soon as it finds any constraint that doesn't allow the
+call to succeed.
+
+4.2.3 pci_disable_msi
+
+void pci_disable_msi(struct pci_dev *dev)
 
-Argument 'dev' points to the device (pci_dev) structure.
+This function should be used to undo the effect of pci_enable_msi() or
+pci_enable_msi_block().  Calling it restores dev->irq to the pin-based
+interrupt number and frees the previously allocated message signaled
+interrupt(s).  The interrupt may subsequently be assigned to another
+device, so drivers should not cache the value of dev->irq.
 
-Argument 'entries' is a pointer to an array of msix_entry structs.
-The number of entries is indicated in argument 'nvec'.
-struct msix_entry is defined in /driver/pci/msi.h:
+A device driver must always call free_irq() on the interrupt(s)
+for which it has called request_irq() before calling this function.
+Failure to do so will result in a BUG_ON(), the device will be left with
+MSI enabled and will leak its vector.
+
+4.3 Using MSI-X
+
+The MSI-X capability is much more flexible than the MSI capability.
+It supports up to 2048 interrupts, each of which can be controlled
+independently.  To support this flexibility, drivers must use an array of
+`struct msix_entry':
 
 struct msix_entry {
 	u16 	vector; /* kernel uses to write alloc vector */
 	u16	entry; /* driver uses to specify entry */
 };
 
-A device driver is responsible for initializing the field 'entry' of
-each element with a unique entry supported by MSI-X table. Otherwise,
--EINVAL will be returned as a result. A successful return of zero
-indicates the PCI subsystem completed initializing each of the requested
-entries of the MSI-X table with message address and message data.
-Last but not least, the PCI subsystem will write the 1:1
-vector-to-entry mapping into the field 'vector' of each element. A
-device driver is responsible for keeping track of allocated MSI-X
-vectors in its internal data structure.
-
-A return of zero indicates that the number of MSI-X vectors was
-successfully allocated. A return of greater than zero indicates
-MSI-X vector shortage. Or a return of less than zero indicates
-a failure. This failure may be a result of duplicate entries
-specified in second argument, or a result of no available vector,
-or a result of failing to initialize MSI-X table entries.
-
-5.3.3 API pci_disable_msix
+This allows for the device to use these interrupts in a sparse fashion;
+for example it could use interrupts 3 and 1027 and allocate only a
+two-element array.  The driver is expected to fill in the 'entry' value
+in each element of the array to indicate which entries it wants the kernel
+to assign interrupts for.  It is invalid to fill in two entries with the
+same number.
+
+4.3.1 pci_enable_msix
+
+int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
+
+Calling this function asks the PCI subsystem to allocate 'nvec' MSIs.
+The 'entries' argument is a pointer to an array of msix_entry structs
+which should be at least 'nvec' entries in size.  On success, the
+function will return 0 and the device will have been switched into
+MSI-X interrupt mode.  The 'vector' elements in each entry will have
+been filled in with the interrupt number.  The driver should then call
+request_irq() for each 'vector' that it decides to use.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to allocate any more MSI-X interrupts for
+this device.  If it returns a positive number, it indicates the maximum
+number of interrupt vectors that could have been allocated. See example
+below.
+
+This function, in contrast with pci_enable_msi(), does not adjust
+dev->irq.  The device will not generate interrupts for this interrupt
+number once MSI-X is enabled.  The device driver is responsible for
+keeping track of the interrupts assigned to the MSI-X vectors so it can
+free them again later.
+
+Device drivers should normally call this function once per device
+during the initialization phase.
+
+It is ideal if drivers can cope with a variable number of MSI-X interrupts,
+there are many reasons why the platform may not be able to provide the
+exact number a driver asks for.
+
+A request loop to achieve that might look like:
+
+static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
+{
+	while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
+		rc = pci_enable_msix(adapter->pdev,
+				     adapter->msix_entries, nvec);
+		if (rc > 0)
+			nvec = rc;
+		else
+			return rc;
+	}
+
+	return -ENOSPC;
+}
+
+4.3.2 pci_disable_msix
 
 void pci_disable_msix(struct pci_dev *dev)
 
-This API should always be used to undo the effect of pci_enable_msix()
-when a device driver is unloading. Note that a device driver should
-always call free_irq() on all MSI-X vectors it has done request_irq()
-on before calling this API. Failure to do so results in a BUG_ON() and
-a device will be left with MSI-X enabled and leaks its vectors.
-
-5.3.4 MSI-X mode vs. legacy mode diagram
-
-The below diagram shows the events which switch the interrupt
-mode on the MSI-X capable device function between MSI-X mode and
-PIN-IRQ assertion mode (legacy).
-
-	 ------------   pci_enable_msix(,,n) ------------------------
-	|	     | <===============	    | 			     |
-	| MSI-X MODE |	  	     	    | PIN-IRQ ASSERTION MODE |
-	| 	     | ===============>	    |			     |
- 	 ------------	pci_disable_msix     ------------------------
-
-Figure 2. MSI-X Mode vs. Legacy Mode
-
-In Figure 2, a device operates by default in legacy mode. A
-successful MSI-X request (using pci_enable_msix()) switches a
-device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector
-stored in dev->irq will be saved by the PCI subsystem; however,
-unlike MSI mode, the PCI subsystem will not replace dev->irq with
-assigned MSI-X vector because the PCI subsystem already writes the 1:1
-vector-to-entry mapping into the field 'vector' of each element
-specified in second argument.
-
-To return back to its default mode, a device driver should always call
-pci_disable_msix() to undo the effect of pci_enable_msix(). Note that
-a device driver should always call free_irq() on all MSI-X vectors it
-has done request_irq() on before calling pci_disable_msix(). Failure
-to do so results in a BUG_ON() and a device will be left with MSI-X
-enabled and leaks its vectors. Otherwise, the PCI subsystem switches a
-device function's interrupt mode from MSI-X mode to legacy mode and
-marks all allocated MSI-X vectors as unused.
-
-Once being marked as unused, there is no guarantee that the PCI
-subsystem will reserve these MSI-X vectors for a device. Depending on
-the availability of current PCI vector resources and the number of
-MSI/MSI-X requests from other drivers, these MSI-X vectors may be
-re-assigned.
-
-For the case where the PCI subsystem re-assigned these MSI-X vectors
-to other drivers, a request to switch back to MSI-X mode may result
-being assigned with another set of MSI-X vectors or a failure if no
-more vectors are available.
-
-5.4 Handling function implementing both MSI and MSI-X capabilities
-
-For the case where a function implements both MSI and MSI-X
-capabilities, the PCI subsystem enables a device to run either in MSI
-mode or MSI-X mode but not both. A device driver determines whether it
-wants MSI or MSI-X enabled on its hardware device. Once a device
-driver requests for MSI, for example, it is prohibited from requesting
-MSI-X; in other words, a device driver is not permitted to ping-pong
-between MSI mod MSI-X mode during a run-time.
-
-5.5 Hardware requirements for MSI/MSI-X support
-
-MSI/MSI-X support requires support from both system hardware and
-individual hardware device functions.
-
-5.5.1 Required x86 hardware support
-
-Since the target of MSI address is the local APIC CPU, enabling
-MSI/MSI-X support in the Linux kernel is dependent on whether existing
-system hardware supports local APIC. Users should verify that their
-system supports local APIC operation by testing that it runs when
-CONFIG_X86_LOCAL_APIC=y.
-
-In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set;
-however, in UP environment, users must manually set
-CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting
-CONFIG_PCI_MSI enables the VECTOR based scheme and the option for
-MSI-capable device drivers to selectively enable MSI/MSI-X.
-
-Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X
-vector is allocated new during runtime and MSI/MSI-X support does not
-depend on BIOS support. This key independency enables MSI/MSI-X
-support on future IOxAPIC free platforms.
-
-5.5.2 Device hardware support
-
-The hardware device function supports MSI by indicating the
-MSI/MSI-X capability structure on its PCI capability list. By
-default, this capability structure will not be initialized by
-the kernel to enable MSI during the system boot. In other words,
-the device function is running on its default pin assertion mode.
-Note that in many cases the hardware supporting MSI have bugs,
-which may result in system hangs. The software driver of specific
-MSI-capable hardware is responsible for deciding whether to call
-pci_enable_msi or not. A return of zero indicates the kernel
-successfully initialized the MSI/MSI-X capability structure of the
-device function. The device function is now running on MSI/MSI-X mode.
-
-5.6 How to tell whether MSI/MSI-X is enabled on device function
-
-At the driver level, a return of zero from the function call of
-pci_enable_msi()/pci_enable_msix() indicates to a device driver that
-its device function is initialized successfully and ready to run in
-MSI/MSI-X mode.
-
-At the user level, users can use the command 'cat /proc/interrupts'
-to display the vectors allocated for devices and their interrupt
-MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is
-enabled on a SCSI Adaptec 39320D Ultra320 controller.
-
-           CPU0       CPU1
-  0:     324639          0    IO-APIC-edge  timer
-  1:       1186          0    IO-APIC-edge  i8042
-  2:          0          0          XT-PIC  cascade
- 12:       2797          0    IO-APIC-edge  i8042
- 14:       6543          0    IO-APIC-edge  ide0
- 15:          1          0    IO-APIC-edge  ide1
-169:          0          0   IO-APIC-level  uhci-hcd
-185:          0          0   IO-APIC-level  uhci-hcd
-193:        138         10         PCI-MSI  aic79xx
-201:         30          0         PCI-MSI  aic79xx
-225:         30          0   IO-APIC-level  aic7xxx
-233:         30          0   IO-APIC-level  aic7xxx
-NMI:          0          0
-LOC:     324553     325068
-ERR:          0
-MIS:          0
-
-6. MSI quirks
-
-Several PCI chipsets or devices are known to not support MSI.
-The PCI stack provides 3 possible levels of MSI disabling:
-* on a single device
-* on all devices behind a specific bridge
-* globally
-
-6.1. Disabling MSI on a single device
-
-Under some circumstances it might be required to disable MSI on a
-single device.  This may be achieved by either not calling pci_enable_msi()
-or all, or setting the pci_dev->no_msi flag before (most of the time
-in a quirk).
-
-6.2. Disabling MSI below a bridge
-
-The vast majority of MSI quirks are required by PCI bridges not
-being able to route MSI between busses. In this case, MSI have to be
-disabled on all devices behind this bridge. It is achieves by setting
-the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge
-subordinate bus. There is no need to set the same flag on bridges that
-are below the broken bridge. When pci_enable_msi() is called to enable
-MSI on a device, pci_msi_supported() takes care of checking the NO_MSI
-flag in all parent busses of the device.
-
-Some bridges actually support dynamic MSI support enabling/disabling
-by changing some bits in their PCI configuration space (especially
-the Hypertransport chipsets such as the nVidia nForce and Serverworks
-HT2000). It may then be required to update the NO_MSI flag on the
-corresponding devices in the sysfs hierarchy. To enable MSI support
-on device "0000:00:0e", do:
-
-	echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus
-
-To disable MSI support, echo 0 instead of 1. Note that it should be
-used with caution since changing this value might break interrupts.
-
-6.3. Disabling MSI globally
-
-Some extreme cases may require to disable MSI globally on the system.
-For now, the only known case is a Serverworks PCI-X chipsets (MSI are
-not supported on several busses that are not all connected to the
-chipset in the Linux PCI hierarchy). In the vast majority of other
-cases, disabling only behind a specific bridge is enough.
-
-For debugging purpose, the user may also pass pci=nomsi on the kernel
-command-line to explicitly disable MSI globally. But, once the appro-
-priate quirks are added to the kernel, this option should not be
-required anymore.
-
-6.4. Finding why MSI cannot be enabled on a device
-
-Assuming that MSI are not enabled on a device, you should look at
-dmesg to find messages that quirks may output when disabling MSI
-on some devices, some bridges or even globally.
-Then, lspci -t gives the list of bridges above a device. Reading
-/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI
-are enabled (1) or disabled (0). In 0 is found in a single bridge
-msi_bus file above the device, MSI cannot be enabled.
-
-7. FAQ
-
-Q1. Are there any limitations on using the MSI?
-
-A1. If the PCI device supports MSI and conforms to the
-specification and the platform supports the APIC local bus,
-then using MSI should work.
-
-Q2. Will it work on all the Pentium processors (P3, P4, Xeon,
-AMD processors)? In P3 IPI's are transmitted on the APIC local
-bus and in P4 and Xeon they are transmitted on the system
-bus. Are there any implications with this?
-
-A2. MSI support enables a PCI device sending an inbound
-memory write (0xfeexxxxx as target address) on its PCI bus
-directly to the FSB. Since the message address has a
-redirection hint bit cleared, it should work.
-
-Q3. The target address 0xfeexxxxx will be translated by the
-Host Bridge into an interrupt message. Are there any
-limitations on the chipsets such as Intel 8xx, Intel e7xxx,
-or VIA?
-
-A3. If these chipsets support an inbound memory write with
-target address set as 0xfeexxxxx, as conformed to PCI
-specification 2.3 or latest, then it should work.
-
-Q4. From the driver point of view, if the MSI is lost because
-of errors occurring during inbound memory write, then it may
-wait forever. Is there a mechanism for it to recover?
-
-A4. Since the target of the transaction is an inbound memory
-write, all transaction termination conditions (Retry,
-Master-Abort, Target-Abort, or normal completion) are
-supported. A device sending an MSI must abide by all the PCI
-rules and conditions regarding that inbound memory write. So,
-if a retry is signaled it must retry, etc... We believe that
-the recommendation for Abort is also a retry (refer to PCI
-specification 2.3 or latest).
+This API should be used to undo the effect of pci_enable_msix().  It frees
+the previously allocated message signaled interrupts.  The interrupts may
+subsequently be assigned to another device, so drivers should not cache
+the value of the 'vector' elements over a call to pci_disable_msix().
+
+A device driver must always call free_irq() on the interrupt(s)
+for which it has called request_irq() before calling this function.
+Failure to do so will result in a BUG_ON(), the device will be left with
+MSI enabled and will leak its vector.
+
+4.3.3 The MSI-X Table
+
+The MSI-X capability specifies a BAR and offset within that BAR for the
+MSI-X Table.  This address is mapped by the PCI subsystem, and should not
+be accessed directly by the device driver.  If the driver wishes to
+mask or unmask an interrupt, it should call disable_irq() / enable_irq().
+
+4.4 Handling devices implementing both MSI and MSI-X capabilities
+
+If a device implements both MSI and MSI-X capabilities, it can
+run in either MSI mode or MSI-X mode but not both simultaneously.
+This is a requirement of the PCI spec, and it is enforced by the
+PCI layer.  Calling pci_enable_msi() when MSI-X is already enabled or
+pci_enable_msix() when MSI is already enabled will result in an error.
+If a device driver wishes to switch between MSI and MSI-X at runtime,
+it must first quiesce the device, then switch it back to pin-interrupt
+mode, before calling pci_enable_msi() or pci_enable_msix() and resuming
+operation.  This is not expected to be a common operation but may be
+useful for debugging or testing during development.
+
+4.5 Considerations when using MSIs
+
+4.5.1 Choosing between MSI-X and MSI
+
+If your device supports both MSI-X and MSI capabilities, you should use
+the MSI-X facilities in preference to the MSI facilities.  As mentioned
+above, MSI-X supports any number of interrupts between 1 and 2048.
+In constrast, MSI is restricted to a maximum of 32 interrupts (and
+must be a power of two).  In addition, the MSI interrupt vectors must
+be allocated consecutively, so the system may not be able to allocate
+as many vectors for MSI as it could for MSI-X.  On some platforms, MSI
+interrupts must all be targetted at the same set of CPUs whereas MSI-X
+interrupts can all be targetted at different CPUs.
+
+4.5.2 Spinlocks
+
+Most device drivers have a per-device spinlock which is taken in the
+interrupt handler.  With pin-based interrupts or a single MSI, it is not
+necessary to disable interrupts (Linux guarantees the same interrupt will
+not be re-entered).  If a device uses multiple interrupts, the driver
+must disable interrupts while the lock is held.  If the device sends
+a different interrupt, the driver will deadlock trying to recursively
+acquire the spinlock.
+
+There are two solutions.  The first is to take the lock with
+spin_lock_irqsave() or spin_lock_irq() (see
+Documentation/DocBook/kernel-locking).  The second is to specify
+IRQF_DISABLED to request_irq() so that the kernel runs the entire
+interrupt routine with interrupts disabled.
+
+If your MSI interrupt routine does not hold the lock for the whole time
+it is running, the first solution may be best.  The second solution is
+normally preferred as it avoids making two transitions from interrupt
+disabled to enabled and back again.
+
+4.6 How to tell whether MSI/MSI-X is enabled on a device
+
+Using 'lspci -v' (as root) may show some devices with "MSI", "Message
+Signalled Interrupts" or "MSI-X" capabilities.  Each of these capabilities
+has an 'Enable' flag which will be followed with either "+" (enabled)
+or "-" (disabled).
+
+
+5. MSI quirks
+
+Several PCI chipsets or devices are known not to support MSIs.
+The PCI stack provides three ways to disable MSIs:
+
+1. globally
+2. on all devices behind a specific bridge
+3. on a single device
+
+5.1. Disabling MSIs globally
+
+Some host chipsets simply don't support MSIs properly.  If we're
+lucky, the manufacturer knows this and has indicated it in the ACPI
+FADT table.  In this case, Linux will automatically disable MSIs.
+Some boards don't include this information in the table and so we have
+to detect them ourselves.  The complete list of these is found near the
+quirk_disable_all_msi() function in drivers/pci/quirks.c.
+
+If you have a board which has problems with MSIs, you can pass pci=nomsi
+on the kernel command line to disable MSIs on all devices.  It would be
+in your best interests to report the problem to linux-pci@vger.kernel.org
+including a full 'lspci -v' so we can add the quirks to the kernel.
+
+5.2. Disabling MSIs below a bridge
+
+Some PCI bridges are not able to route MSIs between busses properly.
+In this case, MSIs must be disabled on all devices behind the bridge.
+
+Some bridges allow you to enable MSIs by changing some bits in their
+PCI configuration space (especially the Hypertransport chipsets such
+as the nVidia nForce and Serverworks HT2000).  As with host chipsets,
+Linux mostly knows about them and automatically enables MSIs if it can.
+If you have a bridge which Linux doesn't yet know about, you can enable
+MSIs in configuration space using whatever method you know works, then
+enable MSIs on that bridge by doing:
+
+       echo 1 > /sys/bus/pci/devices/$bridge/msi_bus
+
+where $bridge is the PCI address of the bridge you've enabled (eg
+0000:00:0e.0).
+
+To disable MSIs, echo 0 instead of 1.  Changing this value should be
+done with caution as it can break interrupt handling for all devices
+below this bridge.
+
+Again, please notify linux-pci@vger.kernel.org of any bridges that need
+special handling.
+
+5.3. Disabling MSIs on a single device
+
+Some devices are known to have faulty MSI implementations.  Usually this
+is handled in the individual device driver but occasionally it's necessary
+to handle this with a quirk.  Some drivers have an option to disable use
+of MSI.  While this is a convenient workaround for the driver author,
+it is not good practise, and should not be emulated.
+
+5.4. Finding why MSIs are disabled on a device
+
+From the above three sections, you can see that there are many reasons
+why MSIs may not be enabled for a given device.  Your first step should
+be to examine your dmesg carefully to determine whether MSIs are enabled
+for your machine.  You should also check your .config to be sure you
+have enabled CONFIG_PCI_MSI.
+
+Then, 'lspci -t' gives the list of bridges above a device.  Reading
+/sys/bus/pci/devices/*/msi_bus will tell you whether MSI are enabled (1)
+or disabled (0).  If 0 is found in any of the msi_bus files belonging
+to bridges between the PCI root and the device, MSIs are disabled.
+
+It is also worth checking the device driver to see whether it supports MSIs.
+For example, it may contain calls to pci_enable_msi(), pci_enable_msix() or
+pci_enable_msi_block().
diff --git a/Documentation/PCI/pci-iov-howto.txt b/Documentation/PCI/pci-iov-howto.txt
new file mode 100644
index 000000000000..fc73ef5d65b8
--- /dev/null
+++ b/Documentation/PCI/pci-iov-howto.txt
@@ -0,0 +1,99 @@
+		PCI Express I/O Virtualization Howto
+		Copyright (C) 2009 Intel Corporation
+		    Yu Zhao <yu.zhao@intel.com>
+
+
+1. Overview
+
+1.1 What is SR-IOV
+
+Single Root I/O Virtualization (SR-IOV) is a PCI Express Extended
+capability which makes one physical device appear as multiple virtual
+devices. The physical device is referred to as Physical Function (PF)
+while the virtual devices are referred to as Virtual Functions (VF).
+Allocation of the VF can be dynamically controlled by the PF via
+registers encapsulated in the capability. By default, this feature is
+not enabled and the PF behaves as traditional PCIe device. Once it's
+turned on, each VF's PCI configuration space can be accessed by its own
+Bus, Device and Function Number (Routing ID). And each VF also has PCI
+Memory Space, which is used to map its register set. VF device driver
+operates on the register set so it can be functional and appear as a
+real existing PCI device.
+
+2. User Guide
+
+2.1 How can I enable SR-IOV capability
+
+The device driver (PF driver) will control the enabling and disabling
+of the capability via API provided by SR-IOV core. If the hardware
+has SR-IOV capability, loading its PF driver would enable it and all
+VFs associated with the PF.
+
+2.2 How can I use the Virtual Functions
+
+The VF is treated as hot-plugged PCI devices in the kernel, so they
+should be able to work in the same way as real PCI devices. The VF
+requires device driver that is same as a normal PCI device's.
+
+3. Developer Guide
+
+3.1 SR-IOV API
+
+To enable SR-IOV capability:
+	int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
+	'nr_virtfn' is number of VFs to be enabled.
+
+To disable SR-IOV capability:
+	void pci_disable_sriov(struct pci_dev *dev);
+
+To notify SR-IOV core of Virtual Function Migration:
+	irqreturn_t pci_sriov_migration(struct pci_dev *dev);
+
+3.2 Usage example
+
+Following piece of code illustrates the usage of the SR-IOV API.
+
+static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	pci_enable_sriov(dev, NR_VIRTFN);
+
+	...
+
+	return 0;
+}
+
+static void __devexit dev_remove(struct pci_dev *dev)
+{
+	pci_disable_sriov(dev);
+
+	...
+}
+
+static int dev_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	...
+
+	return 0;
+}
+
+static int dev_resume(struct pci_dev *dev)
+{
+	...
+
+	return 0;
+}
+
+static void dev_shutdown(struct pci_dev *dev)
+{
+	...
+}
+
+static struct pci_driver dev_driver = {
+	.name =		"SR-IOV Physical Function driver",
+	.id_table =	dev_id_table,
+	.probe =	dev_probe,
+	.remove =	__devexit_p(dev_remove),
+	.suspend =	dev_suspend,
+	.resume =	dev_resume,
+	.shutdown =	dev_shutdown,
+};
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index ea7d1bdad34d..d0f354670646 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -392,3 +392,35 @@ Why:	The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
 	have been kept around for migration reasons. After more than two years
 	it's time to remove them finally
 Who:	Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
+What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
+When:	2011
+Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
+	represent a machine's physical PCI slots. The change in semantics
+	had userspace implications, as the hotplug core no longer allowed
+	drivers to create multiple sysfs files per physical slot (required
+	for multi-function devices, e.g.). fakephp was seen as a developer's
+	tool only, and its interface changed. Too late, we learned that
+	there were some users of the fakephp interface.
+
+	In 2.6.30, the original fakephp interface was restored. At the same
+	time, the PCI core gained the ability that fakephp provided, namely
+	function-level hot-remove and hot-add.
+
+	Since the PCI core now provides the same functionality, exposed in:
+
+		/sys/bus/pci/rescan
+		/sys/bus/pci/devices/.../remove
+		/sys/bus/pci/devices/.../rescan
+
+	there is no functional reason to maintain fakephp as well.
+
+	We will keep the existing module so that 'modprobe fakephp' will
+	present the old /sys/bus/pci/slots/... interface for compatibility,
+	but users are urged to migrate their applications to the API above.
+
+	After a reasonable transition period, we will remove the legacy
+	fakephp interface.
+Who:	Alex Chiang <achiang@hp.com>
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 9f8740ca3f3b..26e4b8bc53ee 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -12,6 +12,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- enable
      |   |-- irq
      |   |-- local_cpus
+     |   |-- remove
      |   |-- resource
      |   |-- resource0
      |   |-- resource1
@@ -36,6 +37,7 @@ files, each with their own function.
        enable	           Whether the device is enabled (ascii, rw)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
+       remove		   remove device from kernel's list (ascii, wo)
        resource		   PCI resource host addresses (ascii, ro)
        resource0..N	   PCI resource N, if present (binary, mmap)
        resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
@@ -46,6 +48,7 @@ files, each with their own function.
 
   ro - read only file
   rw - file is readable and writable
+  wo - write only file
   mmap - file is mmapable
   ascii - file contains ascii text
   binary - file contains binary data
@@ -73,6 +76,13 @@ that the device must be enabled for a rom read to return data succesfully.
 In the event a driver is not bound to the device, it can be enabled using the
 'enable' file, documented above.
 
+The 'remove' file is used to remove the PCI device, by writing a non-zero
+integer to the file.  This does not involve any kind of hot-plug functionality,
+e.g. powering off the device.  The device is removed from the kernel's list of
+PCI devices, the sysfs directory for it is removed, and the device will be
+removed from any drivers attached to it. Removal of PCI root buses is
+disallowed.
+
 Accessing legacy resources through sysfs
 ----------------------------------------
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index aeedb89a307a..240257dd4238 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1695,6 +1695,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			See also Documentation/blockdev/paride.txt.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options:
+		earlydump	[X86] dump PCI config space before the kernel
+			        changes anything
 		off		[X86] don't probe for the PCI bus
 		bios		[X86-32] force use of PCI BIOS, don't access
 				the hardware directly. Use this if your machine
@@ -1794,6 +1796,15 @@ and is between 256 and 4096 characters. It is defined in the file
 		cbmemsize=nn[KMG]	The fixed amount of bus space which is
 				reserved for the CardBus bridge's memory
 				window. The default value is 64 megabytes.
+		resource_alignment=
+				Format:
+				[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+				Specifies alignment and device to reassign
+				aligned memory resources.
+				If <order of align> is not specified,
+				PAGE_SIZE is used as alignment.
+				PCI-PCI bridge can be specified, if resource
+				windows need to be expanded.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.