Merge tag 'drm-misc-next-2020-04-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.8:

UAPI Changes:

  - drm: error out with EBUSY when device has existing master
  - drm: rework SET_MASTER and DROP_MASTER perm handling

Cross-subsystem Changes:

  - mm: export two symbols from slub/slob
  - fbdev: savage: fix -Wextra build warning
  - video: omap2: Use scnprintf() for avoiding potential buffer overflow

Core Changes:

  - Remove drm_pci.h
  - drm_pci_{alloc/free)() are now legacy
  - Introduce managed DRM resourcesA
  - Allow drivers to subclass struct drm_framebuffer
  - Introduce struct drm_afbc_framebuffer and helpers
  - fbdev: remove return value from generic fbdev setup
  - Introduce simple-encoder helper
  - vram-helpers: set fence on plane
  - dp_mst: ACT timeout improvements
  - dp_mst: Remove drm_dp_mst_has_audio()
  - TTM: ttm_trace_dma_{map/unmap}() cleanups
  - dma-buf: add flag for PCIP2P support
  - EDID: Various improvements
  - Encoder: cleanup semantics of possible_clones and possible_crtcs
  - VBLANK documentation updates
  - Writeback documentation updates

Driver Changes:

  - Convert several drivers to i2c_new_client_device()
  - Drop explicit drm_mode_config_cleanup() calls from drivers
  - Auto-release device structures with drmm_add_final_kfree()
  - Init bfdev console after registering DRM device
  - Make various .debugfs functions return 0 unconditionally; ignore errors
  - video: Use scnprintf() to avoid buffer overflows
  - Convert drivers to simple encoders

  - drm/amdgpu: note that we can handle peer2peer DMA-buf
  - drm/amdgpu: add support for exporting VRAM using DMA-buf v3
  - drm/kirin: Revert change to register connectors
  - drm/lima: Add optional devfreq and cooling device support
  - drm/lima: Various improvements wrt. task handling
  - drm/panel: nt39016: Support multiple modes and 50Hz
  - drm/panel: Support Leadtek LTK050H3146W
  - drm/rockchip: Add support for afbc
  - drm/virtio: Various cleanups
  - drm/hisilicon/hibmc: Enforce 128-byte stride alignment
  - drm/qxl: Fix notify port address of cursor ring buffer
  - drm/sun4i: Improvements to format handling
  - drm/bridge: dw-hdmi: Various improvements

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g

18 files changed, 621 insertions, 142 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 000000000000..8aff2d68fc33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+  - Guido Gúnther <agx@sigxcpu.org>
+  - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+  the SOCs NWL MIPI-DSI host controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-nwl-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: DSI core clock
+      - description: RX_ESC clock (used in escape mode)
+      - description: TX_ESC clock (used in escape mode)
+      - description: PHY_REF clock
+      - description: LCDIF clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: rx_esc
+      - const: tx_esc
+      - const: phy_ref
+      - const: lcdif
+
+  mux-controls:
+    description:
+      mux controller node to use for operating the input mux
+
+  phys:
+    maxItems: 1
+    description:
+      A phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: dsi byte reset line
+      - description: dsi dpi reset line
+      - description: dsi esc reset line
+      - description: dsi pclk reset line
+
+  reset-names:
+    items:
+      - const: byte
+      - const: dpi
+      - const: esc
+      - const: pclk
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/graph.txt.
+    properties:
+      port@0:
+        type: object
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          endpoint@0:
+            description: sub-node describing the input from LCDIF
+            type: object
+
+          endpoint@1:
+            description: sub-node describing the input from DCSS
+            type: object
+
+          reg:
+            const: 0
+
+        required:
+          - '#address-cells'
+          - '#size-cells'
+          - reg
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+
+        additionalProperties: false
+
+      port@1:
+        type: object
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+patternProperties:
+  "^panel@[0-9]+$":
+    type: object
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - mux-controls
+  - phy-names
+  - phys
+  - ports
+  - reg
+  - reset-names
+  - resets
+
+additionalProperties: false
+
+examples:
+ - |
+
+   #include <dt-bindings/clock/imx8mq-clock.h>
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+   #include <dt-bindings/reset/imx8mq-reset.h>
+
+   mipi_dsi: mipi_dsi@30a00000 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              compatible = "fsl,imx8mq-nwl-dsi";
+              reg = <0x30A00000 0x300>;
+              clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+                       <&clk IMX8MQ_CLK_DSI_AHB>,
+                       <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+                       <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+                       <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+              clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+              interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+              mux-controls = <&mux 0>;
+              power-domains = <&pgc_mipi>;
+              resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+              reset-names = "byte", "dpi", "esc", "pclk";
+              phys = <&dphy>;
+              phy-names = "dphy";
+
+              panel@0 {
+                      #address-cells = <1>;
+                      #size-cells = <0>;
+                      compatible = "rocktech,jh057n00900";
+                      reg = <0>;
+                      port@0 {
+                           reg = <0>;
+                           panel_in: endpoint {
+                                     remote-endpoint = <&mipi_dsi_out>;
+                           };
+                      };
+              };
+
+              ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                           #size-cells = <0>;
+                           #address-cells = <1>;
+                           reg = <0>;
+                           mipi_dsi_in: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&lcdif_mipi_dsi>;
+                           };
+                    };
+                    port@1 {
+                           reg = <1>;
+                           mipi_dsi_out: endpoint {
+                                         remote-endpoint = <&panel_in>;
+                           };
+                    };
+              };
+      };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 740213459134..7f5df5851017 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -24,6 +24,8 @@ properties:
       - boe,tv101wum-n53
         # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
       - auo,b101uan08.3
+        # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+      - boe,tv105wum-nw0
 
   reg:
     description: the virtual channel number of a DSI peripheral
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index c8c0c9cb0492..56903ded005e 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: display timing bindings
+title: display timings bindings
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -14,7 +14,7 @@ maintainers:
 description: |
   A display panel may be able to handle several display timings,
   with different resolutions.
-  The display-timings node makes it possible to specify the timing
+  The display-timings node makes it possible to specify the timings
   and to specify the timing that is native for the display.
 
 properties:
@@ -25,8 +25,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       The default display timing is the one specified as native-mode.
-      If no native-mode is specified then the first node is assumed the
-      native mode.
+      If no native-mode is specified then the first node is assumed
+      to be the native mode.
 
 patternProperties:
   "^timing":
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
deleted file mode 100644
index 82caa7b65ae8..000000000000
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
-
-Required properties:
-- compatible: must be "feiyang,fy07024di26a30d"
-- reg: DSI virtual channel used by that screen
-- avdd-supply: analog regulator dc1 switch
-- dvdd-supply: 3v3 digital regulator
-- reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "feiyang,fy07024di26a30d";
-	reg = <0>;
-	avdd-supply = <&reg_dc1sw>;
-	dvdd-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
new file mode 100644
index 000000000000..95acf9e96f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feiyang,fy07024di26a30d
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  avdd-supply:
+    description: analog regulator dc1 switch
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "feiyang,fy07024di26a30d";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
new file mode 100644
index 000000000000..a372bdc5bde1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - leadtek,ltk050h3146w
+      - leadtek,ltk050h3146w-a2
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+     description: regulator that supplies the iovcc voltage
+  vci-supply:
+     description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk050h3146w";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index fd931b293816..b900973b5f7b 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "leadtek,ltk500hd1829";
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index ed051ba12084..dd97907a7450 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -63,9 +63,9 @@ properties:
 
   display-timings:
     description:
-      Some display panels supports several resolutions with different timing.
+      Some display panels support several resolutions with different timings.
       The display-timings bindings supports specifying several timings and
-      optional specify which is the native mode.
+      optionally specifying which is the native mode.
     allOf:
       - $ref: display-timings.yaml#
 
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 393ffc6acbba..8fc117d1547c 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -227,6 +227,8 @@ properties:
       - sharp,ls020b1dd01d
         # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
       - shelly,sca07010-bfn-lnn
+        # Starry KR070PE2T 7" WVGA TFT LCD panel
+      - starry,kr070pe2t
         # Starry 12.2" (1920x1200 pixels) TFT LCD panel
       - starry,kr122ea0sra
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
deleted file mode 100644
index ccd17597f1f6..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Sitronix ST7701 based LCD panels
-
-ST7701 designed for small and medium sizes of TFT LCD display, is
-capable of supporting up to 480RGBX864 in resolution. It provides
-several system interfaces like MIPI/RGB/SPI.
-
-Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
-inbuilt ST7701 chip.
-
-Required properties:
-- compatible: must be "sitronix,st7701" and one of
-  * "techstar,ts8550b"
-- reset-gpios: a GPIO phandle for the reset pin
-
-Required properties for techstar,ts8550b:
-- reg: DSI virtual channel used by that screen
-- VCC-supply: analog regulator for MIPI circuit
-- IOVCC-supply: I/O system regulator
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "techstar,ts8550b", "sitronix,st7701";
-	reg = <0>;
-	VCC-supply = <&reg_dldo2>;
-	IOVCC-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
new file mode 100644
index 000000000000..6dff59fe4be1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7701 based LCD panels
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ST7701 designed for small and medium sizes of TFT LCD display, is
+  capable of supporting up to 480RGBX864 in resolution. It provides
+  several system interfaces like MIPI/RGB/SPI.
+
+  Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+  inbuilt ST7701 chip.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - techstar,ts8550b
+      - const: sitronix,st7701
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  VCC-supply:
+    description: analog regulator for MIPI circuit
+
+  IOVCC-supply:
+    description: I/O system regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - VCC-supply
+  - IOVCC-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "techstar,ts8550b", "sitronix,st7701";
+            reg = <0>;
+            VCC-supply = <&reg_dldo2>;
+            IOVCC-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 000000000000..b36f39f6b233
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels Device Tree Bindings.
+
+maintainers:
+ - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+  This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,rm69299-1080p-display
+
+  vdda-supply:
+    description: |
+      Phandle of the regulator that provides the vdda supply voltage.
+
+  vdd3p3-supply:
+    description: |
+      Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - vdda-supply
+  - vdd3p3-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    panel {
+        compatible = "visionox,rm69299-1080p-display";
+
+        vdda-supply = <&src_pp1800_l8c>;
+        vdd3p3-supply = <&src_pp2800_l18a>;
+
+        reset-gpios = <&pm6150l_gpio 3 0>;
+        port {
+            panel0_in: endpoint {
+                remote-endpoint = <&dsi0_out>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index d9fdb58e06b4..6913923df569 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "xinpeng,xpp055c272";
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
deleted file mode 100644
index 8b3a5f514205..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-device-tree bindings for rockchip soc display controller (vop)
-
-VOP (Visual Output Processor) is the Display Controller for the Rockchip
-series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"rockchip,rk3036-vop";
-		"rockchip,rk3126-vop";
-		"rockchip,px30-vop-lit";
-		"rockchip,px30-vop-big";
-		"rockchip,rk3066-vop";
-		"rockchip,rk3188-vop";
-		"rockchip,rk3288-vop";
-		"rockchip,rk3368-vop";
-		"rockchip,rk3366-vop";
-		"rockchip,rk3399-vop-big";
-		"rockchip,rk3399-vop-lit";
-		"rockchip,rk3228-vop";
-		"rockchip,rk3328-vop";
-
-- reg: Must contain one entry corresponding to the base address and length
-	of the register space. Can optionally contain a second entry
-	corresponding to the CRTC gamma LUT address.
-
-- interrupts: should contain a list of all VOP IP block interrupts in the
-		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- clocks: must include clock specifiers corresponding to entries in the
-		clock-names property.
-
-- clock-names: Must contain
-		aclk_vop: for ddr buffer transfer.
-		hclk_vop: for ahb bus to R/W the phy regs.
-		dclk_vop: pixel clock.
-
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - axi
-  - ahb
-  - dclk
-
-- iommus: required a iommu node
-
-- port: A port node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-SoC specific DT entry:
-	vopb: vopb@ff930000 {
-		compatible = "rockchip,rk3288-vop";
-		reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
-		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
-		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
-		reset-names = "axi", "ahb", "dclk";
-		iommus = <&vopb_mmu>;
-		vopb_out: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			vopb_out_edp: endpoint@0 {
-				reg = <0>;
-				remote-endpoint=<&edp_in_vopb>;
-			};
-			vopb_out_hdmi: endpoint@1 {
-				reg = <1>;
-				remote-endpoint=<&hdmi_in_vopb>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
new file mode 100644
index 000000000000..1695e3e4bcec
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+  VOP (Video Output Processor) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-vop-big
+      - rockchip,px30-vop-lit
+      - rockchip,rk3036-vop
+      - rockchip,rk3066-vop
+      - rockchip,rk3126-vop
+      - rockchip,rk3188-vop
+      - rockchip,rk3228-vop
+      - rockchip,rk3288-vop
+      - rockchip,rk3328-vop
+      - rockchip,rk3366-vop
+      - rockchip,rk3368-vop
+      - rockchip,rk3399-vop-big
+      - rockchip,rk3399-vop-lit
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Pixel clock.
+      - description: Clock for the ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: aclk_vop
+      - const: dclk_vop
+      - const: hclk_vop
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: dclk
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-rates:
+    maxItems: 2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3288-power.h>
+    vopb: vopb@ff930000 {
+      compatible = "rockchip,rk3288-vop";
+      reg = <0x0 0xff930000 0x0 0x19c>,
+            <0x0 0xff931000 0x0 0x1000>;
+      interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP0>,
+               <&cru DCLK_VOP0>,
+               <&cru HCLK_VOP0>;
+      clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+      power-domains = <&power RK3288_PD_VIO>;
+      resets = <&cru SRST_LCDC1_AXI>,
+               <&cru SRST_LCDC1_AHB>,
+               <&cru SRST_LCDC1_DCLK>;
+      reset-names = "axi", "ahb", "dclk";
+      iommus = <&vopb_mmu>;
+      vopb_out: port {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vopb_out_edp: endpoint@0 {
+          reg = <0>;
+          remote-endpoint=<&edp_in_vopb>;
+        };
+        vopb_out_hdmi: endpoint@1 {
+          reg = <1>;
+          remote-endpoint=<&hdmi_in_vopb>;
+        };
+      };
+    };
diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst
index a73320576ca9..12272b168580 100644
--- a/Documentation/gpu/drm-internals.rst
+++ b/Documentation/gpu/drm-internals.rst
@@ -132,6 +132,18 @@ be unmapped; on many devices, the ROM address decoder is shared with
 other BARs, so leaving it mapped could cause undesired behaviour like
 hangs or memory corruption.
 
+Managed Resources
+-----------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_managed.c
+   :doc: managed resources
+
+.. kernel-doc:: drivers/gpu/drm/drm_managed.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_managed.h
+   :internal:
+
 Bus-specific Device Registration and PCI Support
 ------------------------------------------------
 
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 906771e03103..397314d08f77 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -3,7 +3,7 @@ Kernel Mode Setting (KMS)
 =========================
 
 Drivers must initialize the mode setting core by calling
-drm_mode_config_init() on the DRM device. The function
+drmm_mode_config_init() on the DRM device. The function
 initializes the :c:type:`struct drm_device <drm_device>`
 mode_config field and never fails. Once done, mode configuration must
 be setup by initializing the following fields.
@@ -397,6 +397,9 @@ Connector Functions Reference
 Writeback Connectors
 --------------------
 
+.. kernel-doc:: include/drm/drm_writeback.h
+  :internal:
+
 .. kernel-doc:: drivers/gpu/drm/drm_writeback.c
   :doc: overview
 
diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
index c77b32601260..1839762044be 100644
--- a/Documentation/gpu/drm-mm.rst
+++ b/Documentation/gpu/drm-mm.rst
@@ -373,15 +373,6 @@ GEM CMA Helper Functions Reference
 .. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c
    :export:
 
-VRAM Helper Function Reference
-==============================
-
-.. kernel-doc:: drivers/gpu/drm/drm_vram_helper_common.c
-   :doc: overview
-
-.. kernel-doc:: include/drm/drm_gem_vram_helper.h
-   :internal:
-
 GEM VRAM Helper Functions Reference
 -----------------------------------