Merge remote-tracking branch 'scottwood/next' into next

Scott says:

"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."

6 files changed, 1046 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index 5666812fc42b..266ff9d23229 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -62,6 +62,8 @@ Required properties:
 		It takes parent's clock-frequency as its clock.
 	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
 		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
+	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
 - #clock-cells: From common clock binding. The number of cells in a
 	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
 	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
@@ -128,8 +130,16 @@ Example for clock block and clock provider:
 			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
 			clock-output-names = "cmux1";
 		};
+
+		platform-pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
 	};
-  }
+};
 
 Example for clock consumer:
 
@@ -139,4 +149,4 @@ Example for clock consumer:
 		clocks = <&mux0>;
 		...
 	};
-  }
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
new file mode 100644
index 000000000000..edeea160ca39
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -0,0 +1,534 @@
+=============================================================================
+Freescale Frame Manager Device Bindings
+
+CONTENTS
+  - FMan Node
+  - FMan Port Node
+  - FMan MURAM Node
+  - FMan dTSEC/XGEC/mEMAC Node
+  - FMan IEEE 1588 Node
+  - Example
+
+=============================================================================
+FMan Node
+
+DESCRIPTION
+
+Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+etc.) the FMan node will have child nodes for each of them.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,fman"
+		FMan version can be determined via FM_IP_REV_1 register in the
+		FMan block. The offset is 0xc4 from the beginning of the
+		Frame Processing Manager memory map (0xc3000 from the
+		beginning of the FMan node).
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the index of the FMan unit.
+
+		The cell-index value may be used by the SoC, to identify the
+		FMan unit in the SoC memory map. In the table bellow,
+		there's a description of the cell-index use in each SoC:
+
+		- P1023:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DEVDISR[1]			1		0
+
+		- P2041, P3041, P4080 P5020, P5040:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DCFG_DEVDISR2[6]		1		0
+		DCFG_DEVDISR2[14]		2		1
+			(Second FM available only in P4080 and P5040)
+
+		- B4860, T1040, T2080, T4240:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DCFG_CCSR_DEVDISR2[24]		1		0
+		DCFG_CCSR_DEVDISR2[25]		2		1
+			(Second FM available only in T4240)
+
+		DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+		the specific SoC "Device Configuration/Pin Control" Memory
+		Map.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Specifies the offset of the
+		following configuration registers:
+		- BMI configuration registers.
+		- QMI configuration registers.
+		- DMA configuration registers.
+		- FPM configuration registers.
+		- FMan controller configuration registers.
+
+- ranges
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- clocks
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: phandle for the fman input clock.
+
+- clock-names
+		usage: required
+		Value type: <stringlist>
+		Definition: "fmanclk" for the fman input clock.
+
+- interrupts
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A pair of IRQs are specified in this property.
+		The first element is associated with the event interrupts and
+		the second element is associated with the error interrupts.
+
+- fsl,qman-channel-range
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: Specifies the range of the available dedicated
+		channels in the FMan. The first cell specifies the beginning
+		of the range and the second cell specifies the number of
+		channels.
+		Further information available at:
+		"Work Queue (WQ) Channel Assignments in the QMan" section
+		in DPAA Reference Manual.
+
+- fsl,qman
+- fsl,bman
+		Usage: required
+		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
+
+=============================================================================
+FMan MURAM Node
+
+DESCRIPTION
+
+FMan Internal memory - shared between all the FMan modules.
+It contains data structures that are common and written to or read by
+the modules.
+FMan internal memory is split into the following parts:
+	Packet buffering (Tx/Rx FIFOs)
+	Frames internal context
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,fman-muram"
+
+- ranges
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the multi-user memory offset and the size within
+		the FMan.
+
+EXAMPLE
+
+muram@0 {
+	compatible = "fsl,fman-muram";
+	ranges = <0 0x000000 0x28000>;
+};
+
+=============================================================================
+FMan Port Node
+
+DESCRIPTION
+
+The Frame Manager (FMan) supports several types of hardware ports:
+	Ethernet receiver (RX)
+	Ethernet transmitter (TX)
+	Offline/Host command (O/H)
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include one of the following:
+			- "fsl,fman-v2-port-oh" for FManV2 OH ports
+			- "fsl,fman-v2-port-rx" for FManV2 RX ports
+			- "fsl,fman-v2-port-tx" for FManV2 TX ports
+			- "fsl,fman-v3-port-oh" for FManV3 OH ports
+			- "fsl,fman-v3-port-rx" for FManV3 RX ports
+			- "fsl,fman-v3-port-tx" for FManV3 TX ports
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the hardware port id.
+		Each hardware port on the FMan has its own hardware PortID.
+		Super set of all hardware Port IDs available at FMan Reference
+		Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+		Each hardware port is assigned a 4KB, port-specific page in
+		the FMan hardware port memory region (which is part of the
+		FMan memory map). The first 4 KB in the FMan hardware ports
+		memory region is used for what are called common registers.
+		The subsequent 63 4KB pages are allocated to the hardware
+		ports.
+		The page of a specific port is determined by the cell-index.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: There is one reg region describing the port
+		configuration registers.
+
+EXAMPLE
+
+port@a8000 {
+	cell-index = <0x28>;
+	compatible = "fsl,fman-v2-port-tx";
+	reg = <0xa8000 0x1000>;
+};
+
+port@88000 {
+	cell-index = <0x8>;
+	compatible = "fsl,fman-v2-port-rx";
+	reg = <0x88000 0x1000>;
+};
+
+port@81000 {
+	cell-index = <0x1>;
+	compatible = "fsl,fman-v2-port-oh";
+	reg = <0x81000 0x1000>;
+};
+
+=============================================================================
+FMan dTSEC/XGEC/mEMAC Node
+
+DESCRIPTION
+
+mEMAC/dTSEC/XGEC are the Ethernet network interfaces
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include one of the following:
+		- "fsl,fman-dtsec" for dTSEC MAC
+		- "fsl,fman-xgec" for XGEC MAC
+		- "fsl,fman-memac for mEMAC MAC
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the MAC id.
+
+		The cell-index value may be used by the FMan or the SoC, to
+		identify the MAC unit in the FMan (or SoC) memory map.
+		In the tables bellow there's a description of the cell-index
+		use, there are two tables, one describes the use of cell-index
+		by the FMan, the second describes the use by the SoC:
+
+		1. FMan Registers
+
+		FManV2:
+		register[bit]		MAC		cell-index
+		============================================================
+		FM_EPI[16]		XGEC		8
+		FM_EPI[16+n]		dTSECn		n-1
+		FM_NPI[11+n]		dTSECn		n-1
+			n = 1,..,5
+
+		FManV3:
+		register[bit]		MAC		cell-index
+		============================================================
+		FM_EPI[16+n]		mEMACn		n-1
+		FM_EPI[25]		mEMAC10		9
+
+		FM_NPI[11+n]		mEMACn		n-1
+		FM_NPI[10]		mEMAC10		9
+		FM_NPI[11]		mEMAC9		8
+			n = 1,..8
+
+		FM_EPI and FM_NPI are located in the FMan memory map.
+
+		2. SoC registers:
+
+		- P2041, P3041, P4080 P5020, P5040:
+		register[bit]		FMan		MAC		cell
+					Unit				index
+		============================================================
+		DCFG_DEVDISR2[7]	1		XGEC		8
+		DCFG_DEVDISR2[7+n]	1		dTSECn		n-1
+		DCFG_DEVDISR2[15]	2		XGEC		8
+		DCFG_DEVDISR2[15+n]	2		dTSECn		n-1
+			n = 1,..5
+
+		- T1040, T2080, T4240, B4860:
+		register[bit]			FMan	MAC		cell
+						Unit			index
+		============================================================
+		DCFG_CCSR_DEVDISR2[n-1]		1	mEMACn		n-1
+		DCFG_CCSR_DEVDISR2[11+n]	2	mEMACn		n-1
+			n = 1,..6,9,10
+
+		EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+		the specific SoC "Device Configuration/Pin Control" Memory
+		Map.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- fsl,fman-ports
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: An array of two phandles - the first references is
+		the FMan RX port and the second is the TX port used by this
+		MAC.
+
+- ptp-timer
+		Usage required
+		Value type: <phandle>
+		Definition: A phandle for 1EEE1588 timer.
+
+EXAMPLE
+
+fman1_tx28: port@a8000 {
+	cell-index = <0x28>;
+	compatible = "fsl,fman-v2-port-tx";
+	reg = <0xa8000 0x1000>;
+};
+
+fman1_rx8: port@88000 {
+	cell-index = <0x8>;
+	compatible = "fsl,fman-v2-port-rx";
+	reg = <0x88000 0x1000>;
+};
+
+ptp-timer: ptp_timer@fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0xfe000 0x1000>;
+};
+
+ethernet@e0000 {
+	compatible = "fsl,fman-dtsec";
+	cell-index = <0>;
+	reg = <0xe0000 0x1000>;
+	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+	ptp-timer = <&ptp-timer>;
+};
+
+============================================================================
+FMan IEEE 1588 Node
+
+DESCRIPTION
+
+The FMan interface to support IEEE 1588
+
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include "fsl,fman-ptp-timer".
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+EXAMPLE
+
+ptp-timer@fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0xfe000 0x1000>;
+};
+
+=============================================================================
+Example
+
+fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman"
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	clocks = <&fman_clk>;
+	clock-names = "fmanclk";
+	interrupts = <
+		96 2 0 0
+		16 2 1 1>;
+	fsl,qman-channel-range = <0x40 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	port@81000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	port@82000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	port@83000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	port@84000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	port@85000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	port@86000 {
+		cell-index = <6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_rx_0x8: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_rx_0x9: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_rx_0xa: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_rx_0xb: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_rx_0xc: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac0000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <0>;
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+	};
+
+	ethernet@e2000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <1>;
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+	};
+
+	ethernet@e4000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <2>;
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+	};
+
+	ethernet@e6000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <3>;
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+	};
+
+	ethernet@e8000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <4>;
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+
+	ethernet@f0000 {
+		cell-index = <8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
new file mode 100644
index 000000000000..2a00e14e11e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
@@ -0,0 +1,56 @@
+QorIQ DPAA Buffer Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- BMan Portal
+	- Example
+
+BMan Portal Node
+
+Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the BMan
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,bman-portal-<hardware revision>"
+			May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Two regions. The first is the cache-enabled region of
+			the portal. The second is the cache-inhibited region of
+			the portal
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property
+
+EXAMPLE
+
+The example below shows a (P4080) BMan portals container/bus node with two portals
+
+	bman-portals@ff4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0xf 0xf4000000 0x200000>;
+
+		bman-portal@0 {
+			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+			reg = <0x0 0x4000>, <0x100000 0x1000>;
+			interrupts = <105 2 0 0>;
+		};
+		bman-portal@4000 {
+			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+			reg = <0x4000 0x4000>, <0x101000 0x1000>;
+			interrupts = <107 2 0 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
new file mode 100644
index 000000000000..9f80bf8709ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -0,0 +1,125 @@
+QorIQ DPAA Buffer Manager Device Tree Bindings
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- BMan Node
+	- BMan Private Memory Node
+	- Example
+
+BMan Node
+
+The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+BMan supports hardware allocation and deallocation of buffers belonging to pools
+originally created by software with configurable depletion thresholds. This
+binding covers the CCSR space programming model
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,bman"
+			May include "fsl,<SoC>-bman"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Registers region within the CCSR address space
+
+The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property. The error interrupt
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+to the respective BMan instance
+
+- fsl,bman
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Description:	List of phandle and DCP index pairs, to the BMan instance
+			to which this device is connected via the DCP
+
+BMan Private Memory Node
+
+BMan requires a contiguous range of physical memory used for the backing store
+for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a
+node under the /reserved-memory node
+
+The BMan FBPR memory node must be named "bman-fbpr"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	Must inclide "fsl,bman-fbpr"
+
+The following constraints are relevant to the FBPR private memory:
+	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
+	  16 GiB
+	- The alignment must be a muliptle of the memory size
+
+The size of the FBPR must be chosen by observing the hardware features configured
+via the Reset Configuration Word (RCW) and that are relevant to a specific board
+(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
+etc.). The size configured in the DT must reflect the hardware capabilities and
+not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a BMan FBPR dynamic allocation memory node
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "fsl,bman-fbpr";
+			alloc-ranges = <0 0 0xf 0xffffffff>;
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+	};
+
+The example below shows a (P4080) BMan CCSR-space node
+
+	crypto@300000 {
+		...
+		fsl,bman = <&bman, 2>;
+		...
+	};
+
+	bman: bman@31a000 {
+		compatible = "fsl,bman";
+		reg = <0x31a000 0x1000>;
+		interrupts = <16 2 1 2>;
+		fsl,liodn = <0x17>;
+		memory-region = <&bman_fbpr>;
+	};
+
+	fman@400000 {
+		...
+		fsl,bman = <&bman, 0>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
new file mode 100644
index 000000000000..48c4dae5d6f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
@@ -0,0 +1,154 @@
+QorIQ DPAA Queue Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- QMan Portal
+	- QMan Pool Channel
+	- Example
+
+QMan Portal Node
+
+Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the QMan
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman-portal-<hardware revision>"
+			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Two regions. The first is the cache-enabled region of
+			the portal. The second is the cache-inhibited region of
+			the portal
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+			(FLIODN)
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- fsl,qman-channel-id
+	Usage:		Required
+	Value type:	<u32>
+	Definition:	The hardware index of the channel. This can also be
+			determined by dividing any of the channel's 8 work queue
+			IDs by 8
+
+In addition to these properties the qman-portals should have sub-nodes to
+represent the HW devices/portals that are connected to the software portal
+described here
+
+The currently supported sub-nodes are:
+	* fman0
+	* fman1
+	* pme
+	* crypto
+
+These subnodes should have the following properties:
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+- dev-handle
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	The phandle to the particular hardware device that this
+			portal is connected to.
+
+DPAA QMan Pool Channel Nodes
+
+Pool Channels are defined with the following properties.
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman-pool-channel"
+			May include "fsl,<SoC>-qman-pool-channel"
+
+- fsl,qman-channel-id
+	Usage:		Required
+	Value type:	<u32>
+	Definition:	The hardware index of the channel. This can also be
+			determined by dividing any of the channel's 8 work queue
+			IDs by 8
+
+EXAMPLE
+
+The example below shows a (P4080) QMan portals container/bus node with two portals
+
+	qman-portals@ff4200000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0xf 0xf4200000 0x200000>;
+
+		qman-portal@0 {
+			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+			reg = <0 0x4000>, <0x100000 0x1000>;
+			interrupts = <104 2 0 0>;
+			fsl,liodn = <1 2>;
+			fsl,qman-channel-id = <0>;
+
+			fman0 {
+				fsl,liodn = <0x21>;
+				dev-handle = <&fman0>;
+			};
+			fman1 {
+				fsl,liodn = <0xa1>;
+				dev-handle = <&fman1>;
+			};
+			crypto {
+				fsl,liodn = <0x41 0x66>;
+				dev-handle = <&crypto>;
+			};
+		};
+		qman-portal@4000 {
+			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+			reg = <0x4000 0x4000>, <0x101000 0x1000>;
+			interrupts = <106 2 0 0>;
+			fsl,liodn = <3 4>;
+			fsl,qman-channel-id = <1>;
+
+			fman0 {
+				fsl,liodn = <0x22>;
+				dev-handle = <&fman0>;
+			};
+			fman1 {
+				fsl,liodn = <0xa2>;
+				dev-handle = <&fman1>;
+			};
+			crypto {
+				fsl,liodn = <0x42 0x67>;
+				dev-handle = <&crypto>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
new file mode 100644
index 000000000000..063e3a0b9d04
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -0,0 +1,165 @@
+QorIQ DPAA Queue Manager Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- QMan Node
+	- QMan Private Memory Nodes
+	- Example
+
+QMan Node
+
+The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+DPAA logic modules, maintains packet ordering within flows. Besides providing
+flow-level queuing, is also responsible for congestion management functions such
+as RED/WRED, congestion notifications and tail discards. This binding covers the
+CCSR space programming model
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman"
+			May include "fsl,<SoC>-qman"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Registers region within the CCSR address space
+
+The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property. The error interrupt
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- clocks
+	Usage:		See clock-bindings.txt and qoriq-clock.txt
+	Value type:	<prop-encoded-array>
+	Definition:	Reference input clock. Its frequency is half of the
+			platform clock
+
+Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
+to the respective QMan instance
+
+- fsl,qman
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Description:	List of phandle and DCP index pairs, to the QMan instance
+			to which this device is connected via the DCP
+
+QMan Private Memory Nodes
+
+QMan requires two contiguous range of physical memory used for the backing store
+for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+This memory is reserved/allocated as a nodes under the /reserved-memory node
+
+The QMan FQD memory node must be named "qman-fqd"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	Must inclide "fsl,qman-fqd"
+
+The QMan PFDR memory node must be named "qman-pfdr"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	Must inclide "fsl,qman-pfdr"
+
+The following constraints are relevant to the FQD and PFDR private memory:
+	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+	  1 GiB
+	- The alignment must be a muliptle of the memory size
+
+The size of the FQD and PFDP must be chosen by observing the hardware features
+configured via the Reset Configuration Word (RCW) and that are relevant to a
+specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+FMan ports, etc.). The size configured in the DT must reflect the hardware
+capabilities and not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qman_fqd: qman-fqd {
+			compatible = "fsl,qman-fqd";
+			alloc-ranges = <0 0 0xf 0xffffffff>;
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			compatible = "fsl,qman-pfdr";
+			alloc-ranges = <0 0 0xf 0xffffffff>;
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+The example below shows a (P4080) QMan CCSR-space node
+
+	clockgen: global-utilities@e1000 {
+		...
+		sysclk: sysclk {
+			...
+		};
+		...
+		platform_pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
+		...
+	};
+
+	crypto@300000 {
+		...
+		fsl,qman = <&qman, 2>;
+		...
+	};
+
+	qman: qman@318000 {
+		compatible = "fsl,qman";
+		reg = <0x318000 0x1000>;
+		interrupts = <16 2 1 3>
+		fsl,liodn = <0x16>;
+		memory-region = <&qman_fqd &qman_pfdr>;
+		clocks = <&platform_pll 1>;
+	};
+
+	fman@400000 {
+		...
+		fsl,qman = <&qman, 0>;
+		...
+	};