summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 20:47:18 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 20:47:18 +0200
commita0d3c7c5c07cfbe00ab89438ddf82482f5a99422 (patch)
tree560def78af776bef5d0d0202580c4be0fc6219c6 /Documentation
parentMerge tag 'localmodconfig-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/... (diff)
parentMerge branch 'topic/xilinx' into for-linus (diff)
downloadlinux-a0d3c7c5c07cfbe00ab89438ddf82482f5a99422.tar.xz
linux-a0d3c7c5c07cfbe00ab89438ddf82482f5a99422.zip
Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-platform-hidma9
-rw-r--r--Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt26
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor.txt5
-rw-r--r--Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt55
-rw-r--r--Documentation/devicetree/bindings/dma/qcom_bam_dma.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/snps-dma.txt11
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt36
7 files changed, 138 insertions, 6 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma
new file mode 100644
index 000000000000..d36441538660
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-hidma
@@ -0,0 +1,9 @@
+What: /sys/devices/platform/hidma-*/chid
+ /sys/devices/platform/QCOM8061:*/chid
+Date: Dec 2015
+KernelVersion: 4.4
+Contact: "Sinan Kaya <okaya@cudeaurora.org>"
+Description:
+ Contains the ID of the channel within the HIDMA instance.
+ It is used to associate a given HIDMA channel with the
+ priority and weight calls in the management interface.
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
index 1396078d15ac..baf9b34d20bf 100644
--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
@@ -12,6 +12,10 @@ Required properties:
- reg: Should contain DMA registers location and length.
- interrupts: Should contain the DMA interrupts associated
to the DMA channels in ascending order.
+- interrupt-names: Should contain the names of the interrupt
+ in the form "dmaXX".
+ Use "dma-shared-all" for the common interrupt line
+ that is shared by all dma channels.
- #dma-cells: Must be <1>, the cell in the dmas property of the
client device represents the DREQ number.
- brcm,dma-channel-mask: Bit mask representing the channels
@@ -34,13 +38,35 @@ dma: dma@7e007000 {
<1 24>,
<1 25>,
<1 26>,
+ /* dma channel 11-14 share one irq */
<1 27>,
+ <1 27>,
+ <1 27>,
+ <1 27>,
+ /* unused shared irq for all channels */
<1 28>;
+ interrupt-names = "dma0",
+ "dma1",
+ "dma2",
+ "dma3",
+ "dma4",
+ "dma5",
+ "dma6",
+ "dma7",
+ "dma8",
+ "dma9",
+ "dma10",
+ "dma11",
+ "dma12",
+ "dma13",
+ "dma14",
+ "dma-shared-all";
#dma-cells = <1>;
brcm,dma-channel-mask = <0x7f35>;
};
+
DMA clients connected to the BCM2835 DMA controller must use the format
described in the dma.txt file, using a two-cell specifier for each channel.
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
index 276ef815ef32..c075f5988135 100644
--- a/Documentation/devicetree/bindings/dma/mv-xor.txt
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -1,7 +1,10 @@
* Marvell XOR engines
Required properties:
-- compatible: Should be "marvell,orion-xor" or "marvell,armada-380-xor"
+- compatible: Should be one of the following:
+ - "marvell,orion-xor"
+ - "marvell,armada-380-xor"
+ - "marvell,armada-3700-xor".
- reg: Should contain registers location and length (two sets)
the first set is the low registers, the second set the high
registers for the XOR engine.
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
new file mode 100644
index 000000000000..1e1dc8f972e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
@@ -0,0 +1,55 @@
+* NVIDIA Tegra Audio DMA (ADMA) controller
+
+The Tegra Audio DMA controller that is used for transferring data
+between system memory and the Audio Processing Engine (APE).
+
+Required properties:
+- compatible: Must be "nvidia,tegra210-adma".
+- reg: Should contain DMA registers location and length. This should be
+ a single entry that includes all of the per-channel registers in one
+ contiguous bank.
+- interrupt-parent: Phandle to the interrupt parent controller.
+- interrupts: Should contain all of the per-channel DMA interrupts in
+ ascending order with respect to the DMA channel index.
+- clocks: Must contain one entry for the ADMA module clock
+ (TEGRA210_CLK_D_AUDIO).
+- clock-names: Must contain the name "d_audio" for the corresponding
+ 'clocks' entry.
+- #dma-cells : Must be 1. The first cell denotes the receive/transmit
+ request number and should be between 1 and the maximum number of
+ requests supported. This value corresponds to the RX/TX_REQUEST_SELECT
+ fields in the ADMA_CHn_CTRL register.
+
+
+Example:
+
+adma: dma@702e2000 {
+ compatible = "nvidia,tegra210-adma";
+ reg = <0x0 0x702e2000 0x0 0x2000>;
+ interrupt-parent = <&tegra_agic>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+ clock-names = "d_audio";
+ #dma-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
index 1c9d48ea4914..9cbf5d9df8fd 100644
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -13,6 +13,8 @@ Required properties:
- clock-names: must contain "bam_clk" entry
- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
the secure world.
+- qcom,controlled-remotely : optional, indicates that the bam is controlled by
+ remote proccessor i.e. execution environment.
Example:
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index c261598164a7..0f5583293c9c 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -13,6 +13,11 @@ Required properties:
- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
increase from chan n->0
- block_size: Maximum block size supported by the controller
+- data-width: Maximum data width supported by hardware per AHB master
+ (in bytes, power of 2)
+
+
+Deprecated properties:
- data_width: Maximum data width supported by hardware per AHB master
(0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
@@ -38,7 +43,7 @@ Example:
chan_allocation_order = <1>;
chan_priority = <1>;
block_size = <0xfff>;
- data_width = <3 3>;
+ data-width = <8 8>;
};
DMA clients connected to the Designware DMA controller must use the format
@@ -47,8 +52,8 @@ The four cells in order are:
1. A phandle pointing to the DMA controller
2. The DMA request line number
-3. Source master for transfers on allocated channel
-4. Destination master for transfers on allocated channel
+3. Memory master for transfers on allocated channel
+4. Peripheral master for transfers on allocated channel
Example:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index e4c4d47f8137..a1f2683c49bf 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -3,18 +3,44 @@ It can be configured to have one channel or two channels. If configured
as two channels, one is to transmit to the video device and another is
to receive from the video device.
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
+ "xlnx,axi-cdma-1.00.a""
- #dma-cells: Should be <1>, see "dmas" property below
- reg: Should contain VDMA registers location and length.
-- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
+- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
- dma-channel child node: Should have at least one channel and can have up to
two channels per device. This node specifies the properties of each
DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+ For VDMA:
+ Required elements: "s_axi_lite_aclk"
+ Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+ "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+ For CDMA:
+ Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+ FOR AXIDMA:
+ Required elements: "s_axi_lite_aclk"
+ Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+ "m_axi_sg_aclk"
+
+Required properties for VDMA:
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
Optional properties:
- xlnx,include-sg: Tells configured for Scatter-mode in
the hardware.
+Optional properties for VDMA:
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
It takes following values:
{1}, flush both channels
@@ -31,6 +57,7 @@ Required child node properties:
Optional child node properties:
- xlnx,include-dre: Tells hardware is configured for Data
Realignment Engine.
+Optional child node properties for VDMA:
- xlnx,genlock-mode: Tells Genlock synchronization is
enabled/disabled in hardware.
@@ -41,8 +68,13 @@ axi_vdma_0: axivdma@40030000 {
compatible = "xlnx,axi-vdma-1.00.a";
#dma_cells = <1>;
reg = < 0x40030000 0x10000 >;
+ dma-ranges = <0x00000000 0x00000000 0x40000000>;
xlnx,num-fstores = <0x8>;
xlnx,flush-fsync = <0x1>;
+ xlnx,addrwidth = <0x20>;
+ clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+ clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+ "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
dma-channel@40030000 {
compatible = "xlnx,axi-vdma-mm2s-channel";
interrupts = < 0 54 4 >;