Merge tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "The change to the Linux page table geometry was delayed for more
  testing with 16G pages, and there's the new CPU features stuff which
  just needed one more polish before going in. Plus a few changes from
  Scott which came in a bit late. And then various fixes, mostly minor.

  Summary highlights:

   - rework the Linux page table geometry to lower memory usage on
     64-bit Book3S (IBM chips) using the Hash MMU.

   - support for a new device tree binding for discovering CPU features
     on future firmwares.

   - Freescale updates from Scott:
      "Includes a fix for a powerpc/next mm regression on 64e, a fix for
       a kernel hang on 64e when using a debugger inside a relocated
       kernel, a qman fix, and misc qe improvements."

  Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
  Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"

* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Support new device tree binding for discovering CPU features
  powerpc: Don't print cpu_spec->cpu_name if it's NULL
  of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
  powerpc/64s: Fix unnecessary machine check handler relocation branch
  powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
  powerpc: Fix distclean with Makefile.postlink
  powerpc/64e: Don't place the stack beyond TASK_SIZE
  powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
  powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
  soc/fsl/qbman: Disable IRQs for deferred QBMan work
  soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
  soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
  soc/fsl/qe: round brg_freq to 1kHz granularity
  soc/fsl/qe: get rid of immrbar_virt_to_phys()
  net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
  powerpc/64e: Fix hang when debugging programs with relocated kernel

2 files changed, 268 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt
new file mode 100644
index 000000000000..5af426e13334
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt
@@ -0,0 +1,248 @@
+*** NOTE ***
+This document is copied from OPAL firmware
+(skiboot/doc/device-tree/ibm,powerpc-cpu-features/binding.txt)
+
+There is more complete overview and documentation of features in that
+source tree.  All patches and modifications should go there.
+************
+
+ibm,powerpc-cpu-features binding
+================================
+
+This device tree binding describes CPU features available to software, with
+enablement, privilege, and compatibility metadata.
+
+More general description of design and implementation of this binding is
+found in design.txt, which also points to documentation of specific features.
+
+
+/cpus/ibm,powerpc-cpu-features node binding
+-------------------------------------------
+
+Node: ibm,powerpc-cpu-features
+
+Description: Container of CPU feature nodes.
+
+The node name must be "ibm,powerpc-cpu-features".
+
+It is implemented as a child of the node "/cpus", but this must not be
+assumed by parsers.
+
+The node is optional but should be provided by new OPAL firmware.
+
+Properties:
+
+- compatible
+  Usage: required
+  Value type: string
+  Definition: "ibm,powerpc-cpu-features"
+
+  This compatibility refers to backwards compatibility of the overall
+  design with parsers that behave according to these guidelines. This can
+  be extended in a backward compatible manner which would not warrant a
+  revision of the compatible property.
+
+- isa
+  Usage: required
+  Value type: <u32>
+  Definition:
+
+  isa that the CPU is currently running in. This provides instruction set
+  compatibility, less the individual feature nodes. For example, an ISA v3.0
+  implementation that lacks the "transactional-memory" cpufeature node
+  should not use transactional memory facilities.
+
+  Value corresponds to the "Power ISA Version" multiplied by 1000.
+  For example, <3000> corresponds to Version 3.0, <2070> to Version 2.07.
+  The minor digit is available for revisions.
+
+- display-name
+  Usage: optional
+  Value type: string
+  Definition:
+
+  A human readable name for the CPU.
+
+/cpus/ibm,powerpc-cpu-features/example-feature node bindings
+----------------------------------------------------------------
+
+Each child node of cpu-features represents a CPU feature / capability.
+
+Node: A string describing an architected CPU feature, e.g., "floating-point".
+
+Description: A feature or capability supported by the CPUs.
+
+The name of the node is a human readable string that forms the interface
+used to describe features to software. Features are currently documented
+in the code where they are implemented in skiboot/core/cpufeatures.c
+
+Presence of the node indicates the feature is available.
+
+Properties:
+
+- isa
+  Usage: required
+  Value type: <u32>
+  Definition:
+
+  First level of the Power ISA that the feature appears in.
+  Software should filter out features when constraining the
+  environment to a particular ISA version.
+
+  Value is defined similarly to /cpus/features/isa
+
+- usable-privilege
+  Usage: required
+  Value type: <u32> bit mask
+  Definition:
+              Bit numbers are LSB0
+              bit 0 - PR (problem state / user mode)
+              bit 1 - OS (privileged state)
+              bit 2 - HV (hypervisor state)
+              All other bits reserved and should be zero.
+
+  This property describes the privilege levels and/or software components
+  that can use the feature.
+
+  If bit 0 is set, then the hwcap-bit-nr property will exist.
+
+
+- hv-support
+  Usage: optional
+  Value type: <u32> bit mask
+  Definition:
+              Bit numbers are LSB0
+              bit 0 -  HFSCR
+              All other bits reserved and should be zero.
+
+  This property describes the HV privilege support required to enable the
+  feature to lesser privilege levels. If the property does not exist then no
+  support is required.
+
+  If no bits are set, the hypervisor must have explicit/custom support for
+  this feature.
+
+  If the HFSCR bit is set, then the hfscr-bit-nr property will exist and
+  the feature may be enabled by setting this bit in the HFSCR register.
+
+
+- os-support
+  Usage: optional
+  Value type: <u32> bit mask
+  Definition:
+              Bit numbers are LSB0
+              bit 0 -  FSCR
+              All other bits reserved and should be zero.
+
+  This property describes the OS privilege support required to enable the
+  feature to lesser privilege levels. If the property does not exist then no
+  support is required.
+
+  If no bits are set, the operating system must have explicit/custom support
+  for this feature.
+
+  If the FSCR bit is set, then the fscr-bit-nr property will exist and
+  the feature may be enabled by setting this bit in the FSCR register.
+
+
+- hfscr-bit-nr
+  Usage: optional
+  Value type: <u32>
+  Definition: HFSCR bit position (LSB0)
+
+  This property exists when the hv-support property HFSCR bit is set. This
+  property describes the bit number in the HFSCR register that the
+  hypervisor must set in order to enable this feature.
+
+  This property also exists if an HFSCR bit corresponds with this feature.
+  This makes CPU feature parsing slightly simpler.
+
+
+- fscr-bit-nr
+  Usage: optional
+  Value type: <u32>
+  Definition: FSCR bit position (LSB0)
+
+  This property exists when the os-support property FSCR bit is set. This
+  property describes the bit number in the FSCR register that the
+  operating system must set in order to enable this feature.
+
+  This property also exists if an FSCR bit corresponds with this feature.
+  This makes CPU feature parsing slightly simpler.
+
+
+- hwcap-bit-nr
+  Usage: optional
+  Value type: <u32>
+  Definition: Linux ELF AUX vector bit position (LSB0)
+
+  This property may exist when the usable-privilege property value has PR bit set.
+  This property describes the bit number that should be set in the ELF AUX
+  hardware capability vectors in order to advertise this feature to userspace.
+  Bits 0-31 correspond to bits 0-31 in AT_HWCAP vector. Bits 32-63 correspond
+  to 0-31 in AT_HWCAP2 vector, and so on.  Missing AT_HWCAPx vectors implies
+  that the feature is not enabled or can not be advertised. Operating systems
+  may provide a number of unassigned hardware capability bits to allow for new
+  features to be advertised.
+
+  Some properties representing features created before this binding are
+  advertised to userspace without a one-to-one hwcap bit number may not specify
+  this bit. Operating system will handle those bits specifically.  All new
+  features usable by userspace will have a hwcap-bit-nr property.
+
+
+- dependencies
+  Usage: optional
+  Value type: <prop-encoded-array>
+  Definition:
+
+  If this property exists then it is a list of phandles to cpu feature
+  nodes that must be enabled for this feature to be enabled.
+
+
+Example
+-------
+
+	/cpus/ibm,powerpc-cpu-features {
+		compatible = "ibm,powerpc-cpu-features";
+
+		isa = <3020>;
+
+		darn {
+			isa = <3000>;
+			usable-privilege = <1 | 2 | 4>;
+			hwcap-bit-nr = <xx>;
+		};
+
+		scv {
+			isa = <3000>;
+			usable-privilege = <1 | 2>;
+			os-support = <0>;
+			hwcap-bit-nr = <xx>;
+		};
+
+		stop {
+			isa = <3000>;
+			usable-privilege = <2 | 4>;
+			hv-support = <0>;
+			os-support = <0>;
+		};
+
+		vsx2 (hypothetical) {
+			isa = <3010>;
+			usable-privilege = <1 | 2 | 4>;
+			hv-support = <0>;
+			os-support = <0>;
+			hwcap-bit-nr = <xx>;
+		};
+
+		vsx2-newinsns {
+			isa = <3020>;
+			usable-privilege = <1 | 2 | 4>;
+			os-support = <1>;
+			fscr-bit-nr = <xx>;
+			hwcap-bit-nr = <xx>;
+			dependencies = <&vsx2>;
+		};
+
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
index 349f79fd7076..626e1afa64a6 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
@@ -13,8 +13,17 @@ Required properties:
 - #gpio-cells : Should be two. The first cell is the pin number and the
   second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
+Optional properties:
+- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C
+  on CPM1), this item tells which ports have an associated interrupt (ports are
+  listed in the same order as in PCINT register)
+- interrupts : This property provides the list of interrupt for each GPIO having
+  one as described by the fsl,cpm1-gpio-irq-mask property. There should be as
+  many interrupts as number of ones in the mask property. The first interrupt in
+  the list corresponds to the most significant bit of the mask.
+- interrupt-parent : Parent for the above interrupt property.
 
-Example of three SOC GPIO banks defined as gpio-controller nodes:
+Example of four SOC GPIO banks defined as gpio-controller nodes:
 
 	CPM1_PIO_A: gpio-controller@950 {
 		#gpio-cells = <2>;
@@ -30,6 +39,16 @@ Example of three SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 	};
 
+	CPM1_PIO_C: gpio-controller@960 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-c";
+		reg = <0x960 0x10>;
+		fsl,cpm1-gpio-irq-mask = <0x0fff>;
+		interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
+		interrupt-parent = <&CPM_PIC>;
+		gpio-controller;
+	};
+
 	CPM1_PIO_E: gpio-controller@ac8 {
 		#gpio-cells = <2>;
 		compatible = "fsl,cpm1-pario-bank-e";