Merge tag 'v4.14-rc7' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

8 files changed, 185 insertions, 31 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 33e96f740639..147d4e8a1403 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 676fdf5f2a99..5cbb6f038615 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -211,7 +211,9 @@ Description:
 		device, after it has been suspended at run time, from a resume
 		request to the moment the device will be ready to process I/O,
 		in microseconds.  If it is equal to 0, however, this means that
-		the PM QoS resume latency may be arbitrary.
+		the PM QoS resume latency may be arbitrary and the special value
+		"n/a" means that user space cannot accept any resume latency at
+		all for the given device.
 
 		Not all drivers support this attribute.  If it isn't supported,
 		it is not present.
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 8282099e0cbf..5da10184d908 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -352,44 +352,30 @@ Read-Copy Update (RCU)
 ----------------------
 
 .. kernel-doc:: include/linux/rcupdate.h
-   :external:
 
 .. kernel-doc:: include/linux/rcupdate_wait.h
-   :external:
 
 .. kernel-doc:: include/linux/rcutree.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree.c
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_plugin.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_exp.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/update.c
-   :external:
 
 .. kernel-doc:: include/linux/srcu.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/srcutree.c
-   :external:
 
 .. kernel-doc:: include/linux/rculist_bl.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist_nulls.h
-   :external:
 
 .. kernel-doc:: include/linux/rcu_sync.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/sync.c
-   :external:
 
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index 38d74314b7ab..b6c1afa6f02d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 4c29cdab0ea5..5eb108e180fa 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -99,7 +99,7 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 	};
 
@@ -124,14 +124,14 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c400000 0 0x200000>;
+			reg = <0x0 0x2c400000 0 0x20000>;
 		};
 
 		ppi-partitions {
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 329e740adea7..f6f80380dff2 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -1108,14 +1108,6 @@ When kbuild executes, the following steps are followed (roughly):
     ld
 	Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
 
-    objcopy
-	Copy binary. Uses OBJCOPYFLAGS usually specified in
-	arch/$(ARCH)/Makefile.
-	OBJCOPYFLAGS_$@ may be used to set additional options.
-
-    gzip
-	Compress target. Use maximum compression to compress target.
-
 	Example:
 		#arch/x86/boot/Makefile
 		LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
@@ -1139,6 +1131,19 @@ When kbuild executes, the following steps are followed (roughly):
 	      resulting in the target file being recompiled for no
 	      obvious reason.
 
+    objcopy
+	Copy binary. Uses OBJCOPYFLAGS usually specified in
+	arch/$(ARCH)/Makefile.
+	OBJCOPYFLAGS_$@ may be used to set additional options.
+
+    gzip
+	Compress target. Use maximum compression to compress target.
+
+	Example:
+		#arch/x86/boot/compressed/Makefile
+		$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+			$(call if_changed,gzip)
+
     dtc
 	Create flattened device tree blob object suitable for linking
 	into vmlinux. Device tree blobs linked into vmlinux are placed
@@ -1219,7 +1224,7 @@ When kbuild executes, the following steps are followed (roughly):
 	that may be shared between individual architectures.
 	The recommended approach how to use a generic header file is
 	to list the file in the Kbuild file.
-	See "7.3 generic-y" for further info on syntax etc.
+	See "7.2 generic-y" for further info on syntax etc.
 
 --- 6.11 Post-link pass
 
@@ -1254,13 +1259,13 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
 arch/<arch>/include/asm/ to list asm files coming from asm-generic.
 See subsequent chapter for the syntax of the Kbuild file.
 
-	--- 7.1 no-export-headers
+--- 7.1 no-export-headers
 
 	no-export-headers is essentially used by include/uapi/linux/Kbuild to
 	avoid exporting specific headers (e.g. kvm.h) on architectures that do
 	not support it. It should be avoided as much as possible.
 
-	--- 7.2 generic-y
+--- 7.2 generic-y
 
 	If an architecture uses a verbatim copy of a header from
 	include/asm-generic then this is listed in the file
@@ -1287,7 +1292,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 		Example: termios.h
 			#include <asm-generic/termios.h>
 
-	--- 7.3 generated-y
+--- 7.3 generated-y
 
 	If an architecture generates other header files alongside generic-y
 	wrappers, generated-y specifies them.
@@ -1299,7 +1304,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 			#arch/x86/include/asm/Kbuild
 			generated-y += syscalls_32.h
 
-	--- 7.5 mandatory-y
+--- 7.4 mandatory-y
 
 	mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
 	to define the minimum set of headers that must be exported in
diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst
index 82fc399fcd33..61e43cc3ed17 100644
--- a/Documentation/process/index.rst
+++ b/Documentation/process/index.rst
@@ -25,6 +25,7 @@ Below are the essential guides that every developer should read.
    submitting-patches
    coding-style
    email-clients
+   kernel-enforcement-statement
 
 Other guides to the community that are of interest to most developers are: 
 
diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst
new file mode 100644
index 000000000000..1e23d4227337
--- /dev/null
+++ b/Documentation/process/kernel-enforcement-statement.rst
@@ -0,0 +1,147 @@
+Linux Kernel Enforcement Statement
+----------------------------------
+
+As developers of the Linux kernel, we have a keen interest in how our software
+is used and how the license for our software is enforced.  Compliance with the
+reciprocal sharing obligations of GPL-2.0 is critical to the long-term
+sustainability of our software and community.
+
+Although there is a right to enforce the separate copyright interests in the
+contributions made to our community, we share an interest in ensuring that
+individual enforcement actions are conducted in a manner that benefits our
+community and do not have an unintended negative impact on the health and
+growth of our software ecosystem.  In order to deter unhelpful enforcement
+actions, we agree that it is in the best interests of our development
+community to undertake the following commitment to users of the Linux kernel
+on behalf of ourselves and any successors to our copyright interests:
+
+    Notwithstanding the termination provisions of the GPL-2.0, we agree that
+    it is in the best interests of our development community to adopt the
+    following provisions of GPL-3.0 as additional permissions under our
+    license with respect to any non-defensive assertion of rights under the
+    license.
+
+	However, if you cease all violation of this License, then your license
+	from a particular copyright holder is reinstated (a) provisionally,
+	unless and until the copyright holder explicitly and finally
+	terminates your license, and (b) permanently, if the copyright holder
+	fails to notify you of the violation by some reasonable means prior to
+	60 days after the cessation.
+
+	Moreover, your license from a particular copyright holder is
+	reinstated permanently if the copyright holder notifies you of the
+	violation by some reasonable means, this is the first time you have
+	received notice of violation of this License (for any work) from that
+	copyright holder, and you cure the violation prior to 30 days after
+	your receipt of the notice.
+
+Our intent in providing these assurances is to encourage more use of the
+software.  We want companies and individuals to use, modify and distribute
+this software.  We want to work with users in an open and transparent way to
+eliminate any uncertainty about our expectations regarding compliance or
+enforcement that might limit adoption of our software.  We view legal action
+as a last resort, to be initiated only when other community efforts have
+failed to resolve the problem.
+
+Finally, once a non-compliance issue is resolved, we hope the user will feel
+welcome to join us in our efforts on this project.  Working together, we will
+be stronger.
+
+Except where noted below, we speak only for ourselves, and not for any company
+we might work for today, have in the past, or will in the future.
+
+  - Bjorn Andersson (Linaro)
+  - Andrea Arcangeli (Red Hat)
+  - Neil Armstrong
+  - Jens Axboe
+  - Pablo Neira Ayuso
+  - Khalid Aziz
+  - Ralf Baechle
+  - Felipe Balbi
+  - Arnd Bergmann
+  - Ard Biesheuvel
+  - Paolo Bonzini (Red Hat)
+  - Christian Borntraeger
+  - Mark Brown (Linaro)
+  - Paul Burton
+  - Javier Martinez Canillas
+  - Rob Clark
+  - Jonathan Corbet
+  - Vivien Didelot (Savoir-faire Linux)
+  - Hans de Goede (Red Hat)
+  - Mel Gorman (SUSE)
+  - Sven Eckelmann
+  - Alex Elder (Linaro)
+  - Fabio Estevam
+  - Larry Finger
+  - Bhumika Goyal
+  - Andy Gross
+  - Juergen Gross
+  - Shawn Guo
+  - Ulf Hansson
+  - Tejun Heo
+  - Rob Herring
+  - Masami Hiramatsu
+  - Michal Hocko
+  - Simon Horman
+  - Johan Hovold (Hovold Consulting AB)
+  - Christophe JAILLET
+  - Olof Johansson
+  - Lee Jones (Linaro)
+  - Heiner Kallweit
+  - Srinivas Kandagatla
+  - Jan Kara
+  - Shuah Khan (Samsung)
+  - David Kershner
+  - Jaegeuk Kim
+  - Namhyung Kim
+  - Colin Ian King
+  - Jeff Kirsher
+  - Greg Kroah-Hartman (Linux Foundation)
+  - Christian König
+  - Vinod Koul
+  - Krzysztof Kozlowski
+  - Viresh Kumar
+  - Aneesh Kumar K.V
+  - Julia Lawall
+  - Doug Ledford (Red Hat)
+  - Chuck Lever (Oracle)
+  - Daniel Lezcano
+  - Shaohua Li
+  - Xin Long (Red Hat)
+  - Tony Luck
+  - Mike Marshall
+  - Chris Mason
+  - Paul E. McKenney
+  - David S. Miller
+  - Ingo Molnar
+  - Kuninori Morimoto
+  - Borislav Petkov
+  - Jiri Pirko
+  - Josh Poimboeuf
+  - Sebastian Reichel (Collabora)
+  - Guenter Roeck
+  - Joerg Roedel
+  - Leon Romanovsky
+  - Steven Rostedt (VMware)
+  - Ivan Safonov
+  - Ivan Safonov
+  - Anna Schumaker
+  - Jes Sorensen
+  - K.Y. Srinivasan
+  - Heiko Stuebner
+  - Jiri Kosina (SUSE)
+  - Dmitry Torokhov
+  - Linus Torvalds
+  - Thierry Reding
+  - Rik van Riel
+  - Geert Uytterhoeven (Glider bvba)
+  - Daniel Vetter
+  - Linus Walleij
+  - Richard Weinberger
+  - Dan Williams
+  - Rafael J. Wysocki
+  - Arvind Yadav
+  - Masahiro Yamada
+  - Wei Yongjun
+  - Lv Zheng