Merge tag 'iio-for-3.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, functionality and cleanups for IIO in the 3.13 cycle

A number of new drivers and some new functionality + a lot of cleanups
all over IIO.

New Core Elements

1) New INT_TIME info_mask element for integration time, which may have
   different effects on measurement noise and similar, than an amplifier
   and hence is different from existing SCALE.  Already existed in some
   drivers as a custom attribute.

2) Introduce a iio_push_buffers_with_timestamp helper to cover the common
   case of filling the last 64 bits of data to be passed to the buffer with
   a timestamp.  Applied to lots of drivers. Cuts down on repeated code and
   moves a slightly fiddly bit of logic into a single location.

3) Introduce info_mask_[shared_by_dir/shared_by_all] elements to allow support
   of elements such as sampling_frequency which is typically shared by all
   input channels on a device.  This reduces code and makes these controls
   available from in kernel consumers of IIO devices.

New drivers

1) MCP3422/3/4 ADC

2) TSL4531 ambient light sensor

3) TCS3472/5 color light sensor

4) GP2AP020A00F ambient light / proximity sensor

5) LPS001WP support added to ST pressure sensor driver.

New driver functionality

1) ti_am335x_adc Add buffered sampling support.
   This device has a hardware fifo that is fed directly into an IIO kfifo
   buffer based on a watershed interrupt.  Note this will act as an example
   of how to handle this increasingly common type of device.
   The only previous example - sca3000 - take a less than optimal approach
   which is largely why it is still in staging.
   A couple of little cleanups for that new functionality followed later.

Core cleanups:

1) MAINTAINERS - Sachin actually brought my email address up to date because
   I said I'd do it and never got around to it :)

2) Assign buffer list elements as single element lists to simplify the
   iio_buffer_is_active logic.

3) wake_up_interruptible_poll instead of wake_up_interruptible to only wake
   up threads waiting for poll notifications.

4) Add O_CLOEXEC flag to anon_inode_get_fd call for IIO event interface.

5) Change iio_push_to_buffers to take a void * pointer so as to avoid some
   annoying and unnecessary type casts.

6) iio_compute_scan_bytes incorrectly took a long rather than unsigned long.

7) Various minor tidy ups.

Driver cleanups (in no particular order)

1) Another set of devm_ allocations patches from Sachin Kamat.

2) tsl2x7x - 0 to NULL cleanup.

3) hmc5843 - fix missing > in MODULE_AUTHOR

4) Set of strict_strto* to kstrto* conversions.

5) mxs-lradc - fix ordering of resource removal to match creation

6) mxs-lradc - add MODULE_ALIAS

7) adc7606 - drop a work pending test duplicated in core functions.

8) hmc5843 - devm_ allocation patch

9) Series of redundant breaks removed.

10) ad2s1200 - pr_err -> dev_err

11) adjd_s311 - use INT_TIME

12)  ST sensors - large set of cleanups from Lee Jones and removed restriction
    to using only triggers provided by the st_sensors themselves from
    Dennis Ciocca.

13) dummy and tmp006 provide sampling_frequency via info_mask_shared_by_all.

14) tcs3472 - fix incorrect buffer size and wrong device pointer used in
    suspend / resume functions.

15) max1363 - use defaults for buffer setup ops as provided by the triggered
    buffer helpers as they are the same as were specified in max1363 driver.

16) Trivial tidy ups in a number of other drivers.

2 files changed, 32 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 39c8de0e53d0..ab1047c20495 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -811,3 +811,14 @@ Description:
 		Writing '1' stores the current device configuration into
 		on-chip EEPROM. After power-up or chip reset the device will
 		automatically load the saved configuration.
+
+What:		/sys/.../iio:deviceX/in_intensity_red_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_green_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_blue_integration_time
+What:		/sys/.../iio:deviceX/in_intensity_clear_integration_time
+What:		/sys/.../iio:deviceX/in_illuminance_integration_time
+KernelVersion:	3.12
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to get/set the integration time in
+		seconds.
diff --git a/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
new file mode 100644
index 000000000000..9231c82317ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
@@ -0,0 +1,21 @@
+* Sharp GP2AP020A00F I2C Proximity/ALS sensor
+
+The proximity detector sensor requires power supply
+for its built-in led. It is also defined by this binding.
+
+Required properties:
+
+  - compatible : should be "sharp,gp2ap020a00f"
+  - reg : the I2C slave address of the light sensor
+  - interrupts : interrupt specifier for the sole interrupt generated
+		 by the device
+  - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt
+
+Example:
+
+gp2ap020a00f@39 {
+	compatible = "sharp,gp2ap020a00f";
+	reg = <0x39>;
+	interrupts = <2 0>;
+	vled-supply = <...>;
+};