diff options
author | Takashi Iwai <tiwai@suse.de> | 2016-11-10 17:20:32 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2016-11-10 22:33:28 +0100 |
commit | c79b5bb0a36f6290d38d9a4dc126cff5c7f44f2a (patch) | |
tree | 2bf1b1b4e087c4521f0463986c403cd59e20d4da /Documentation | |
parent | ALSA: doc: ReSTize README.maya44 (diff) | |
download | linux-c79b5bb0a36f6290d38d9a4dc126cff5c7f44f2a.tar.xz linux-c79b5bb0a36f6290d38d9a4dc126cff5c7f44f2a.zip |
ALSA: doc: ReSTize hdspm.txt
A simple conversion from a plain text file. Quite a few reformatting
in the end due to the style of the original document.
Put to cards directory.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/sound/cards/hdspm.rst (renamed from Documentation/sound/alsa/hdspm.txt) | 253 | ||||
-rw-r--r-- | Documentation/sound/cards/index.rst | 1 |
2 files changed, 136 insertions, 118 deletions
diff --git a/Documentation/sound/alsa/hdspm.txt b/Documentation/sound/cards/hdspm.rst index 7ba31948dea7..5373e51ed076 100644 --- a/Documentation/sound/alsa/hdspm.txt +++ b/Documentation/sound/cards/hdspm.rst @@ -1,21 +1,24 @@ +======================================= Software Interface ALSA-DSP MADI Driver +======================================= (translated from German, so no good English ;-), -2004 - winfried ritsch - +2004 - winfried ritsch - Full functionality has been added to the driver. Since some of - the Controls and startup-options are ALSA-Standard and only the - special Controls are described and discussed below. +Full functionality has been added to the driver. Since some of +the Controls and startup-options are ALSA-Standard and only the +special Controls are described and discussed below. - hardware functionality: +Hardware functionality +====================== - Audio transmission: +Audio transmission +------------------ - number of channels -- depends on transmission mode +* number of channels -- depends on transmission mode The number of channels chosen is from 1..Nmax. The reason to use for a lower number of channels is only resource allocation, @@ -23,31 +26,34 @@ Software Interface ALSA-DSP MADI Driver allocated. So also the throughput of the PCI system can be scaled. (Only important for low performance boards). - Single Speed -- 1..64 channels +* Single Speed -- 1..64 channels +.. note:: (Note: Choosing the 56channel mode for transmission or as receiver, only 56 are transmitted/received over the MADI, but all 64 channels are available for the mixer, so channel count for the driver) - Double Speed -- 1..32 channels +* Double Speed -- 1..32 channels +.. note:: Note: Choosing the 56-channel mode for transmission/receive-mode , only 28 are transmitted/received over the MADI, but all 32 channels are available for the mixer, so channel count for the driver - Quad Speed -- 1..16 channels +* Quad Speed -- 1..16 channels - Note: Choosing the 56-channel mode for +.. note:: + Choosing the 56-channel mode for transmission/receive-mode , only 14 are transmitted/received over the MADI, but all 16 channels are available for the mixer, so channel count for the driver - Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE) +* Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE) - Sample Rates -- +* Sample Rates -- Single Speed -- 32000, 44100, 48000 @@ -55,14 +61,13 @@ Software Interface ALSA-DSP MADI Driver Quad Speed -- 128000, 176400, 192000 (untested) - access-mode -- MMAP (memory mapped), Not interleaved - (PCM_NON-INTERLEAVED) +* access-mode -- MMAP (memory mapped), Not interleaved (PCM_NON-INTERLEAVED) - buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples +* buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples - fragments -- 2 +* fragments -- 2 - Hardware-pointer -- 2 Modi +* Hardware-pointer -- 2 Modi The Card supports the readout of the actual Buffer-pointer, @@ -74,53 +79,54 @@ Software Interface ALSA-DSP MADI Driver precise-pointer. +.. hint:: (Hint: Experimenting I found that the pointer is maximum 64 to large never to small. So if you subtract 64 you always have a safe pointer for writing, which is used on this mode inside ALSA. In theory now you can get now a latency as low as 16 Samples, which is a quarter of the interrupt possibilities.) - Precise Pointer -- off + * Precise Pointer -- off interrupt used for pointer-calculation - - Precise Pointer -- on + + * Precise Pointer -- on hardware pointer used. - Controller: - +Controller +---------- - Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to - use the standard mixer-controls, since this would break most of - (especially graphic) ALSA-Mixer GUIs. So Mixer control has be - provided by a 2-dimensional controller using the - hwdep-interface. +Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to +use the standard mixer-controls, since this would break most of +(especially graphic) ALSA-Mixer GUIs. So Mixer control has be +provided by a 2-dimensional controller using the +hwdep-interface. - Also all 128+256 Peak and RMS-Meter can be accessed via the - hwdep-interface. Since it could be a performance problem always - copying and converting Peak and RMS-Levels even if you just need - one, I decided to export the hardware structure, so that of - needed some driver-guru can implement a memory-mapping of mixer - or peak-meters over ioctl, or also to do only copying and no - conversion. A test-application shows the usage of the controller. - - Latency Controls --- not implemented !!! +Also all 128+256 Peak and RMS-Meter can be accessed via the +hwdep-interface. Since it could be a performance problem always +copying and converting Peak and RMS-Levels even if you just need +one, I decided to export the hardware structure, so that of +needed some driver-guru can implement a memory-mapping of mixer +or peak-meters over ioctl, or also to do only copying and no +conversion. A test-application shows the usage of the controller. +* Latency Controls --- not implemented !!! +.. note:: Note: Within the windows-driver the latency is accessible of a control-panel, but buffer-sizes are controlled with ALSA from hwparams-calls and should not be changed in run-state, I did not implement it here. - System Clock -- suspended !!!! - - Name -- "System Clock Mode" +* System Clock -- suspended !!!! - Access -- Read Write - - Values -- "Master" "Slave" + * Name -- "System Clock Mode" + * Access -- Read Write + + * Values -- "Master" "Slave" +.. note:: !!!! This is a hardware-function but is in conflict with the Clock-source controller, which is a kind of ALSA-standard. I makes sense to set the card to a special mode (master at some @@ -128,106 +134,107 @@ Software Interface ALSA-DSP MADI Driver a studio should have working synchronisations setup. So use Clock-source-controller instead !!!! - Clock Source +* Clock Source - Name -- "Sample Clock Source" + * Name -- "Sample Clock Source" - Access -- Read Write + * Access -- Read Write - Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz", - "Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz", - "Internal 96.0 kHz" + * Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz", + "Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz", + "Internal 96.0 kHz" Choose between Master at a specific Frequency and so also the Speed-mode or Slave (Autosync). Also see "Preferred Sync Ref" - +.. warning:: !!!! This is no pure hardware function but was implemented by ALSA by some ALSA-drivers before, so I use it also. !!! - Preferred Sync Ref +* Preferred Sync Ref - Name -- "Preferred Sync Reference" + * Name -- "Preferred Sync Reference" - Access -- Read Write + * Access -- Read Write - Values -- "Word" "MADI" + * Values -- "Word" "MADI" Within the Auto-sync-Mode the preferred Sync Source can be chosen. If it is not available another is used if possible. +.. note:: Note: Since MADI has a much higher bit-rate than word-clock, the card should synchronise better in MADI Mode. But since the RME-PLL is very good, there are almost no problems with word-clock too. I never found a difference. - TX 64 channel --- +* TX 64 channel - Name -- "TX 64 channels mode" + * Name -- "TX 64 channels mode" - Access -- Read Write + * Access -- Read Write - Values -- 0 1 + * Values -- 0 1 Using 64-channel-modus (1) or 56-channel-modus for MADI-transmission (0). +.. note:: Note: This control is for output only. Input-mode is detected automatically from hardware sending MADI. - Clear TMS --- +* Clear TMS - Name -- "Clear Track Marker" + * Name -- "Clear Track Marker" - Access -- Read Write + * Access -- Read Write - Values -- 0 1 + * Values -- 0 1 Don't use to lower 5 Audio-bits on AES as additional Bits. - Safe Mode oder Auto Input --- +* Safe Mode oder Auto Input - Name -- "Safe Mode" + * Name -- "Safe Mode" - Access -- Read Write + * Access -- Read Write - Values -- 0 1 - - (default on) + * Values -- 0 1 (default on) If on (1), then if either the optical or coaxial connection has a failure, there is a takeover to the working one, with no sample failure. Its only useful if you use the second as a backup connection. - Input --- +* Input - Name -- "Input Select" + * Name -- "Input Select" - Access -- Read Write + * Access -- Read Write - Values -- optical coaxial + * Values -- optical coaxial Choosing the Input, optical or coaxial. If Safe-mode is active, this is the preferred Input. --------------- Mixer ---------------------- +Mixer +----- - Mixer +* Mixer - Name -- "Mixer" + * Name -- "Mixer" - Access -- Read Write + * Access -- Read Write - Values - <channel-number 0-127> <Value 0-65535> + * Values - <channel-number 0-127> <Value 0-65535> Here as a first value the channel-index is taken to get/set the @@ -235,40 +242,41 @@ Software Interface ALSA-DSP MADI Driver fader and 64-127 the playback to outputs fader. Value 0 is channel muted 0 and 32768 an amplification of 1. - Chn 1-64 +* Chn 1-64 fast mixer for the ALSA-mixer utils. The diagonal of the mixer-matrix is implemented from playback to output. - Line Out +* Line Out - Name -- "Line Out" + * Name -- "Line Out" - Access -- Read Write + * Access -- Read Write - Values -- 0 1 + * Values -- 0 1 Switching on and off the analog out, which has nothing to do with mixing or routing. the analog outs reflects channel 63,64. ---- information (only read access): +Information (only read access) +------------------------------ - Sample Rate +* Sample Rate - Name -- "System Sample Rate" + * Name -- "System Sample Rate" - Access -- Read-only + * Access -- Read-only getting the sample rate. - External Rate measured +* External Rate measured - Name -- "External Rate" + * Name -- "External Rate" - Access -- Read only + * Access -- Read only Should be "Autosync Rate", but Name used is @@ -276,79 +284,86 @@ Software Interface ALSA-DSP MADI Driver reported. - MADI Sync Status +* MADI Sync Status - Name -- "MADI Sync Lock Status" + * Name -- "MADI Sync Lock Status" - Access -- Read + * Access -- Read - Values -- 0,1,2 + * Values -- 0,1,2 MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced. - Word Clock Sync Status +* Word Clock Sync Status - Name -- "Word Clock Lock Status" + * Name -- "Word Clock Lock Status" - Access -- Read + * Access -- Read - Values -- 0,1,2 + * Values -- 0,1,2 Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced. - AutoSync +* AutoSync - Name -- "AutoSync Reference" + * Name -- "AutoSync Reference" - Access -- Read + * Access -- Read - Values -- "WordClock", "MADI", "None" + * Values -- "WordClock", "MADI", "None" Sync-Reference is either "WordClock", "MADI" or none. - RX 64ch --- noch nicht implementiert +* RX 64ch --- noch nicht implementiert MADI-Receiver is in 64 channel mode oder 56 channel mode. - AB_inp --- not tested +* AB_inp --- not tested Used input for Auto-Input. - actual Buffer Position --- not implemented +* actual Buffer Position --- not implemented !!! this is a ALSA internal function, so no control is used !!! -Calling Parameter: +Calling Parameter +================= + +* index int array (min = 1, max = 8) - index int array (min = 1, max = 8), - "Index value for RME HDSPM interface." card-index within ALSA + Index value for RME HDSPM interface. card-index within ALSA note: ALSA-standard - id string array (min = 1, max = 8), - "ID string for RME HDSPM interface." +* id string array (min = 1, max = 8) + + ID string for RME HDSPM interface. note: ALSA-standard - enable int array (min = 1, max = 8), - "Enable/disable specific HDSPM sound-cards." +* enable int array (min = 1, max = 8) + + Enable/disable specific HDSPM sound-cards. note: ALSA-standard - precise_ptr int array (min = 1, max = 8), - "Enable precise pointer, or disable." +* precise_ptr int array (min = 1, max = 8) + Enable precise pointer, or disable. + +.. note:: note: Use only when the application supports this (which is a special case). - line_outs_monitor int array (min = 1, max = 8), - "Send playback streams to analog outs by default." +* line_outs_monitor int array (min = 1, max = 8) + Send playback streams to analog outs by default. +.. note:: note: each playback channel is mixed to the same numbered output channel (routed). This is against the ALSA-convention, where all channels have to be muted on after loading the driver, but was @@ -356,7 +371,9 @@ Calling Parameter: - enable_monitor int array (min = 1, max = 8), - "Enable Analog Out on Channel 63/64 by default." +* enable_monitor int array (min = 1, max = 8) + + Enable Analog Out on Channel 63/64 by default. +.. note :: note: here the analog output is enabled (but not routed). diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index 6c8e4141df9a..b143eff93c87 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -14,3 +14,4 @@ Card-Specific Information mixart bt87x maya44 + hdspm |