Merge tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Another batch of removing unneeded type references in schemas

 - Fix some out of date filename references

 - Convert renesas,drif schema to use DT graph schema

* tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: More removals of type references on common properties
  dt-bindings: media: renesas,drif: Use graph schema
  leds: Fix reference file name of documentation
  dt-bindings: phy: cadence-torrent: update reference file of docs

11 files changed, 13 insertions, 25 deletions

diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index c268debe5b8d..28675b0b80f1 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -60,7 +60,6 @@ properties:
     maxItems: 2
 
   idt,xtal-load-femtofarads:
-    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 9000
     maximum: 22760
     description: Optional load capacitor for XTAL1 and XTAL2
@@ -84,7 +83,6 @@ patternProperties:
         enum: [ 1800000, 2500000, 3300000 ]
       idt,slew-percent:
         description: The Slew rate control for CMOS single-ended.
-        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [ 80, 85, 90, 100 ]
 
 required:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 6f2398cdc82d..1e7894e524f9 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -102,7 +102,6 @@ patternProperties:
 
       st,adc-channel-names:
         description: List of single-ended channel names.
-        $ref: /schemas/types.yaml#/definitions/string-array
 
       st,filter-order:
         description: |
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index 74244d21d2b3..d41d8743aad4 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -38,6 +38,5 @@ properties:
       Duration in seconds which the key should be kept pressed for device to
       reset automatically. Device with key pressed reset feature can specify
       this property.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index cb6498108b78..36c955965d90 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -92,7 +92,6 @@ properties:
       this interconnect to send RPMh commands.
 
   qcom,bcm-voter-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: |
       Names for each of the qcom,bcm-voters specified.
 
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
index ccebce597f37..a555d94084b7 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
@@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
 In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
 However, on some devices there are Serial LEDs (LEDs connected to a 74x164
 controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
-by hardware using this driver.
+as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
+or by hardware using this driver.
 Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
 controlled, so the only chance to keep them working is by using this driver.
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index da5708e7b43b..6e51c6b91ee5 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller
 This controller is present on BCM6358 and BCM6368.
 In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
 which can either be controlled by software (exporting the 74x164 as spi-gpio.
-See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
 by hardware using this driver.
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index f1bdaeab4053..ce505a7c006a 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -99,32 +99,26 @@ properties:
       Indicates that the channel acts as primary among the bonded channels.
 
   port:
-    type: object
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
     description:
-      Child port node corresponding to the data input, in accordance with the
-      video interface bindings defined in
-      Documentation/devicetree/bindings/media/video-interfaces.txt.
-      The port node must contain at least one endpoint.
+      Child port node corresponding to the data input. The port node must
+      contain at least one endpoint.
 
     properties:
       endpoint:
-        type: object
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
 
         properties:
-          remote-endpoint:
-            description:
-              A phandle to the remote tuner endpoint subnode in remote node
-              port.
-
           sync-active:
+            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [0, 1]
             description:
               Indicates sync signal polarity, 0/1 for low/high respectively.
               This property maps to SYNCAC bit in the hardware manual. The
               default is 1 (active high).
 
-        additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 7443490d4cc6..5fe6d3dceb08 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -105,7 +105,6 @@ properties:
       - description: Whether the IPA clock is enabled (if valid)
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: The names of the state bits used for SMP2P output
     items:
       - const: ipa-clock-enabled-valid
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index 01dcd14e7b2a..320a232c7208 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -118,7 +118,7 @@ patternProperties:
         description:
           Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
           EXTERNAL_SSC or INTERNAL_SSC.
-          Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1, 2]
         default: 0
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
index db1aa238cda5..b62c2431f94e 100644
--- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 1
 
   phys:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description: phandle to the USB phy
 
   monitored-battery:
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
index b4c190bddd84..61802a11baf4 100644
--- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -49,7 +49,7 @@ properties:
     maxItems: 1
 
   memory-region:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description:
       phandle to a node describing reserved memory (System RAM memory)
       The M core can't access all the DDR memory space on some platform,