Merge branch 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux into next/soc

From Nicolas Pitre:

This is the first MCPM backend submission for VExpress running on RTSM
aka Fast Models implementing the big.LITTLE system architecture.  This
enables SMP secondary boot as well as CPU hotplug on this platform.

A big prerequisite for this support is the CCI driver from Lorenzo
included in this pull request.

Also included is Rob Herring's set_auxcr/get_auxcr allowing nicer code.

Signed-off-by: Olof Johansson <olof@lixom.net>

* 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux:
  ARM: vexpress: Select multi-cluster SMP operation if required
  ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
  ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
  ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
  ARM: vexpress: introduce DCSCB support
  ARM: introduce common set_auxcr/get_auxcr functions
  drivers/bus: arm-cci: function to enable CCI ports from early boot code
  drivers: bus: add ARM CCI support

2 files changed, 191 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
new file mode 100644
index 000000000000..92d36e2aa877
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -0,0 +1,172 @@
+=======================================================
+ARM CCI cache coherent interconnect binding description
+=======================================================
+
+ARM multi-cluster systems maintain intra-cluster coherency through a
+cache coherent interconnect (CCI) that is capable of monitoring bus
+transactions and manage coherency, TLB invalidations and memory barriers.
+
+It allows snooping and distributed virtual memory message broadcast across
+clusters, through memory mapped interface, with a global control register
+space and multiple sets of interface control registers, one per slave
+interface.
+
+Bindings for the CCI node follow the ePAPR standard, available from:
+
+www.power.org/documentation/epapr-version-1-1/
+
+with the addition of the bindings described in this document which are
+specific to ARM.
+
+* CCI interconnect node
+
+	Description: Describes a CCI cache coherent Interconnect component
+
+	Node name must be "cci".
+	Node's parent must be the root node /, and the address space visible
+	through the CCI interconnect is the same as the one seen from the
+	root node (ie from CPUs perspective as per DT standard).
+	Every CCI node has to define the following properties:
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be set to
+			    "arm,cci-400"
+
+	- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Specifies base physical
+			    address of CCI control registers common to all
+			    interfaces.
+
+	- ranges:
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Follow rules in the ePAPR for
+			    hierarchical bus addressing. CCI interfaces
+			    addresses refer to the parent node addressing
+			    scheme to declare their register bases.
+
+	CCI interconnect node can define the following child nodes:
+
+	- CCI control interface nodes
+
+		Node name must be "slave-if".
+		Parent node must be CCI interconnect node.
+
+		A CCI control interface node must contain the following
+		properties:
+
+		- compatible
+			Usage: required
+			Value type: <string>
+			Definition: must be set to
+				    "arm,cci-400-ctrl-if"
+
+		- interface-type:
+			Usage: required
+			Value type: <string>
+			Definition: must be set to one of {"ace", "ace-lite"}
+				    depending on the interface type the node
+				    represents.
+
+		- reg:
+			Usage: required
+			Value type: <prop-encoded-array>
+			Definition: the base address and size of the
+				    corresponding interface programming
+				    registers.
+
+* CCI interconnect bus masters
+
+	Description: masters in the device tree connected to a CCI port
+		     (inclusive of CPUs and their cpu nodes).
+
+	A CCI interconnect bus master node must contain the following
+	properties:
+
+	- cci-control-port:
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle containing the CCI control interface node
+			    the master is connected to.
+
+Example:
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			cci-control-port = <&cci_control1>;
+			reg = <0x0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			cci-control-port = <&cci_control1>;
+			reg = <0x1>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			cci-control-port = <&cci_control2>;
+			reg = <0x100>;
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			cci-control-port = <&cci_control2>;
+			reg = <0x101>;
+		};
+
+	};
+
+	dma0: dma@3000000 {
+		compatible = "arm,pl330", "arm,primecell";
+		cci-control-port = <&cci_control0>;
+		reg = <0x0 0x3000000 0x0 0x1000>;
+		interrupts = <10>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x6000>;
+
+		cci_control0: slave-if@1000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace-lite";
+			reg = <0x1000 0x1000>;
+		};
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+This CCI node corresponds to a CCI component whose control registers sits
+at address 0x000000002c090000.
+CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
+CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
+CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};
diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
new file mode 100644
index 000000000000..3b8fbf3c00c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
@@ -0,0 +1,19 @@
+ARM Dual Cluster System Configuration Block
+-------------------------------------------
+
+The Dual Cluster System Configuration Block (DCSCB) provides basic
+functionality for controlling clocks, resets and configuration pins in
+the Dual Cluster System implemented by the Real-Time System Model (RTSM).
+
+Required properties:
+
+- compatible : should be "arm,rtsm,dcscb"
+
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	dcscb@60000000 {
+		compatible = "arm,rtsm,dcscb";
+		reg = <0x60000000 0x1000>;
+	};