Merge tag 'v5.2-rc6' into sched/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

11 files changed, 263 insertions, 37 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox
index fed7c3765a4e..c2a403f20b90 100644
--- a/Documentation/ABI/testing/sysfs-bus-siox
+++ b/Documentation/ABI/testing/sysfs-bus-siox
@@ -1,6 +1,6 @@
 What:		/sys/bus/siox/devices/siox-X/active
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		On reading represents the current state of the bus. If it
 		contains a "0" the bus is stopped and connected devices are
@@ -12,7 +12,7 @@ Description:
 
 What:		/sys/bus/siox/devices/siox-X/device_add
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Write-only file. Write
 
@@ -27,13 +27,13 @@ Description:
 
 What:		/sys/bus/siox/devices/siox-X/device_remove
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Write-only file. A single write removes the last device in the siox chain.
 
 What:		/sys/bus/siox/devices/siox-X/poll_interval_ns
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Defines the interval between two poll cycles in nano seconds.
 		Note this is rounded to jiffies on writing. On reading the current value
@@ -41,33 +41,33 @@ Description:
 
 What:		/sys/bus/siox/devices/siox-X-Y/connected
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e.
 		communication with it is not ensured. "1" signals a working connection.
 
 What:		/sys/bus/siox/devices/siox-X-Y/inbytes
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the inbytes value provided to siox-X/device_add
 
 What:		/sys/bus/siox/devices/siox-X-Y/status_errors
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Counts the number of time intervals when the read status byte doesn't yield the
 		expected value.
 
 What:		/sys/bus/siox/devices/siox-X-Y/type
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the type value provided to siox-X/device_add.
 
 What:		/sys/bus/siox/devices/siox-X-Y/watchdog
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting if the watchdog of the siox device is
 		active. "0" means the watchdog is not active and the device is expected to
@@ -75,13 +75,13 @@ Description:
 
 What:		/sys/bus/siox/devices/siox-X-Y/watchdog_errors
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the number to time intervals when the
 		watchdog was active.
 
 What:		/sys/bus/siox/devices/siox-X-Y/outbytes
 KernelVersion:	4.16
-Contact:	Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Description:
 		Read-only value reporting the outbytes value provided to siox-X/device_add.
diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
index 7122d6264c49..c310db4ccbc2 100644
--- a/Documentation/ABI/testing/sysfs-class-net-qmi
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -29,7 +29,7 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to add a qmap mux
+		Write a number ranging from 1 to 254 to add a qmap mux
 		based network device, supported by recent Qualcomm based
 		modems.
 
@@ -46,5 +46,5 @@ Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to delete a previously
+		Write a number ranging from 1 to 254 to delete a previously
 		created qmap mux based network device.
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index 188c8bd4eb67..5a0111d4de58 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -4,6 +4,7 @@ Required properties:
  - compatible: Should be one of the following:
    - "microchip,mcp2510" for MCP2510.
    - "microchip,mcp2515" for MCP2515.
+   - "microchip,mcp25625" for MCP25625.
  - reg: SPI chip select.
  - clocks: The clock feeding the CAN controller.
  - interrupts: Should contain IRQ line for the CAN controller.
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
new file mode 100644
index 000000000000..27f02ec4bb45
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V bindings for 'cpus' DT nodes
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+
+allOf:
+  - $ref: /schemas/cpus.yaml#
+
+properties:
+  $nodename:
+    const: cpus
+    description: Container of cpu nodes
+
+  '#address-cells':
+    const: 1
+    description: |
+      A single unsigned 32-bit integer uniquely identifies each RISC-V
+      hart in a system.  (See the "reg" node under the "cpu" node,
+      below).
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^cpu@[0-9a-f]+$':
+    properties:
+      compatible:
+        type: array
+        items:
+          - enum:
+              - sifive,rocket0
+              - sifive,e5
+              - sifive,e51
+              - sifive,u54-mc
+              - sifive,u54
+              - sifive,u5
+          - const: riscv
+        description:
+          Identifies that the hart uses the RISC-V instruction set
+          and identifies the type of the hart.
+
+      mmu-type:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/string"
+          - enum:
+              - riscv,sv32
+              - riscv,sv39
+              - riscv,sv48
+        description:
+          Identifies the MMU address translation mode used on this
+          hart.  These values originate from the RISC-V Privileged
+          Specification document, available from
+          https://riscv.org/specifications/
+
+      riscv,isa:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/string"
+          - enum:
+              - rv64imac
+              - rv64imafdc
+        description:
+          Identifies the specific RISC-V instruction set architecture
+          supported by the hart.  These are documented in the RISC-V
+          User-Level ISA document, available from
+          https://riscv.org/specifications/
+
+      timebase-frequency:
+        type: integer
+        minimum: 1
+        description:
+          Specifies the clock frequency of the system timer in Hz.
+          This value is common to all harts on a single system image.
+
+      interrupt-controller:
+        type: object
+        description: Describes the CPU's local interrupt controller
+
+        properties:
+          '#interrupt-cells':
+            const: 1
+
+          compatible:
+            const: riscv,cpu-intc
+
+          interrupt-controller: true
+
+        required:
+          - '#interrupt-cells'
+          - compatible
+          - interrupt-controller
+
+    required:
+      - riscv,isa
+      - timebase-frequency
+      - interrupt-controller
+
+examples:
+  - |
+    // Example 1: SiFive Freedom U540G Development Kit
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        timebase-frequency = <1000000>;
+        cpu@0 {
+                clock-frequency = <0>;
+                compatible = "sifive,rocket0", "riscv";
+                device_type = "cpu";
+                i-cache-block-size = <64>;
+                i-cache-sets = <128>;
+                i-cache-size = <16384>;
+                reg = <0>;
+                riscv,isa = "rv64imac";
+                cpu_intc0: interrupt-controller {
+                        #interrupt-cells = <1>;
+                        compatible = "riscv,cpu-intc";
+                        interrupt-controller;
+                };
+        };
+        cpu@1 {
+                clock-frequency = <0>;
+                compatible = "sifive,rocket0", "riscv";
+                d-cache-block-size = <64>;
+                d-cache-sets = <64>;
+                d-cache-size = <32768>;
+                d-tlb-sets = <1>;
+                d-tlb-size = <32>;
+                device_type = "cpu";
+                i-cache-block-size = <64>;
+                i-cache-sets = <64>;
+                i-cache-size = <32768>;
+                i-tlb-sets = <1>;
+                i-tlb-size = <32>;
+                mmu-type = "riscv,sv39";
+                reg = <1>;
+                riscv,isa = "rv64imafdc";
+                tlb-split;
+                cpu_intc1: interrupt-controller {
+                        #interrupt-cells = <1>;
+                        compatible = "riscv,cpu-intc";
+                        interrupt-controller;
+                };
+        };
+    };
+
+  - |
+    // Example 2: Spike ISA Simulator with 1 Hart
+    cpus {
+            cpu@0 {
+                    device_type = "cpu";
+                    reg = <0>;
+                    compatible = "riscv";
+                    riscv,isa = "rv64imafdc";
+                    mmu-type = "riscv,sv48";
+                    interrupt-controller {
+                            #interrupt-cells = <1>;
+                            interrupt-controller;
+                            compatible = "riscv,cpu-intc";
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml
new file mode 100644
index 000000000000..9d17dc2f3f84
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/sifive.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive SoC-based boards
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+
+description:
+  SiFive SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sifive,freedom-unleashed-a00
+      - const: sifive,fu540-c000
+      - const: sifive,fu540
+...
diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst
index 25f50eace28b..8fecfa11d4ff 100644
--- a/Documentation/driver-api/uio-howto.rst
+++ b/Documentation/driver-api/uio-howto.rst
@@ -276,8 +276,8 @@ fields of ``struct uio_mem``:
 -  ``int memtype``: Required if the mapping is used. Set this to
    ``UIO_MEM_PHYS`` if you you have physical memory on your card to be
    mapped. Use ``UIO_MEM_LOGICAL`` for logical memory (e.g. allocated
-   with :c:func:`kmalloc()`). There's also ``UIO_MEM_VIRTUAL`` for
-   virtual memory.
+   with :c:func:`__get_free_pages()` but not kmalloc()). There's also
+   ``UIO_MEM_VIRTUAL`` for virtual memory.
 
 -  ``phys_addr_t addr``: Required if the mapping is used. Fill in the
    address of your memory block. This address is the one that appears in
diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt
index 60a5ec04e8f0..5a865437b33f 100644
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@@ -79,7 +79,7 @@ C. Boot options
 
         Select the initial font to use. The value 'name' can be any of the
         compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6,
-        PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, VGA8x16, VGA8x8.
+        PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, TER16x32, VGA8x16, VGA8x8.
 
 	Note, not all drivers can handle font with widths not divisible by 8,
         such as vga16fb.
diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst
index e14d7d40fc75..50bccbf68308 100644
--- a/Documentation/networking/af_xdp.rst
+++ b/Documentation/networking/af_xdp.rst
@@ -316,16 +316,16 @@ A: When a netdev of a physical NIC is initialized, Linux usually
    all the traffic, you can force the netdev to only have 1 queue, queue
    id 0, and then bind to queue 0. You can use ethtool to do this::
 
-   sudo ethtool -L <interface> combined 1
+     sudo ethtool -L <interface> combined 1
 
    If you want to only see part of the traffic, you can program the
    NIC through ethtool to filter out your traffic to a single queue id
    that you can bind your XDP socket to. Here is one example in which
    UDP traffic to and from port 4242 are sent to queue 2::
 
-   sudo ethtool -N <interface> rx-flow-hash udp4 fn
-   sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \
-   4242 action 2
+     sudo ethtool -N <interface> rx-flow-hash udp4 fn
+     sudo ethtool -N <interface> flow-type udp4 src-port 4242 dst-port \
+     4242 action 2
 
    A number of other ways are possible all up to the capabilitites of
    the NIC you have.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 14fe93049d28..22f6b8b1110a 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -255,6 +255,14 @@ tcp_base_mss - INTEGER
 	Path MTU discovery (MTU probing).  If MTU probing is enabled,
 	this is the initial MSS used by the connection.
 
+tcp_min_snd_mss - INTEGER
+	TCP SYN and SYNACK messages usually advertise an ADVMSS option,
+	as described in RFC 1122 and RFC 6691.
+	If this ADVMSS option is smaller than tcp_min_snd_mss,
+	it is silently capped to tcp_min_snd_mss.
+
+	Default : 48 (at least 8 bytes of payload per segment)
+
 tcp_congestion_control - STRING
 	Set the congestion control algorithm to be used for new
 	connections. The algorithm "reno" is always available, but
@@ -772,6 +780,14 @@ tcp_challenge_ack_limit - INTEGER
 	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
 	Default: 100
 
+tcp_rx_skb_cache - BOOLEAN
+	Controls a per TCP socket cache of one skb, that might help
+	performance of some workloads. This might be dangerous
+	on systems with a lot of TCP sockets, since it increases
+	memory usage.
+
+	Default: 0 (disabled)
+
 UDP variables:
 
 udp_l3mdev_accept - BOOLEAN
diff --git a/Documentation/networking/rds.txt b/Documentation/networking/rds.txt
index 0235ae69af2a..f2a0147c933d 100644
--- a/Documentation/networking/rds.txt
+++ b/Documentation/networking/rds.txt
@@ -389,7 +389,7 @@ Multipath RDS (mprds)
   a common (to all paths) part, and a per-path struct rds_conn_path. All
   I/O workqs and reconnect threads are driven from the rds_conn_path.
   Transports such as TCP that are multipath capable may then set up a
-  TPC socket per rds_conn_path, and this is managed by the transport via
+  TCP socket per rds_conn_path, and this is managed by the transport via
   the transport privatee cp_transport_data pointer.
 
   Transports announce themselves as multipath capable by setting the
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index ba6c42c576dd..2a4531bb06bd 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1079,7 +1079,7 @@ yet and must be cleared on entry.
 
 4.35 KVM_SET_USER_MEMORY_REGION
 
-Capability: KVM_CAP_USER_MEM
+Capability: KVM_CAP_USER_MEMORY
 Architectures: all
 Type: vm ioctl
 Parameters: struct kvm_userspace_memory_region (in)
@@ -3857,43 +3857,59 @@ Type: vcpu ioctl
 Parameters: struct kvm_nested_state (in/out)
 Returns: 0 on success, -1 on error
 Errors:
-  E2BIG:     the total state size (including the fixed-size part of struct
-             kvm_nested_state) exceeds the value of 'size' specified by
+  E2BIG:     the total state size exceeds the value of 'size' specified by
              the user; the size required will be written into size.
 
 struct kvm_nested_state {
 	__u16 flags;
 	__u16 format;
 	__u32 size;
+
 	union {
-		struct kvm_vmx_nested_state vmx;
-		struct kvm_svm_nested_state svm;
+		struct kvm_vmx_nested_state_hdr vmx;
+		struct kvm_svm_nested_state_hdr svm;
+
+		/* Pad the header to 128 bytes.  */
 		__u8 pad[120];
-	};
-	__u8 data[0];
+	} hdr;
+
+	union {
+		struct kvm_vmx_nested_state_data vmx[0];
+		struct kvm_svm_nested_state_data svm[0];
+	} data;
 };
 
 #define KVM_STATE_NESTED_GUEST_MODE	0x00000001
 #define KVM_STATE_NESTED_RUN_PENDING	0x00000002
+#define KVM_STATE_NESTED_EVMCS		0x00000004
 
-#define KVM_STATE_NESTED_SMM_GUEST_MODE	0x00000001
-#define KVM_STATE_NESTED_SMM_VMXON	0x00000002
+#define KVM_STATE_NESTED_FORMAT_VMX		0
+#define KVM_STATE_NESTED_FORMAT_SVM		1
 
-struct kvm_vmx_nested_state {
+#define KVM_STATE_NESTED_VMX_VMCS_SIZE		0x1000
+
+#define KVM_STATE_NESTED_VMX_SMM_GUEST_MODE	0x00000001
+#define KVM_STATE_NESTED_VMX_SMM_VMXON		0x00000002
+
+struct kvm_vmx_nested_state_hdr {
 	__u64 vmxon_pa;
-	__u64 vmcs_pa;
+	__u64 vmcs12_pa;
 
 	struct {
 		__u16 flags;
 	} smm;
 };
 
+struct kvm_vmx_nested_state_data {
+	__u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
+	__u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
+};
+
 This ioctl copies the vcpu's nested virtualization state from the kernel to
 userspace.
 
-The maximum size of the state, including the fixed-size part of struct
-kvm_nested_state, can be retrieved by passing KVM_CAP_NESTED_STATE to
-the KVM_CHECK_EXTENSION ioctl().
+The maximum size of the state can be retrieved by passing KVM_CAP_NESTED_STATE
+to the KVM_CHECK_EXTENSION ioctl().
 
 4.115 KVM_SET_NESTED_STATE
 
@@ -3903,8 +3919,8 @@ Type: vcpu ioctl
 Parameters: struct kvm_nested_state (in)
 Returns: 0 on success, -1 on error
 
-This copies the vcpu's kvm_nested_state struct from userspace to the kernel.  For
-the definition of struct kvm_nested_state, see KVM_GET_NESTED_STATE.
+This copies the vcpu's kvm_nested_state struct from userspace to the kernel.
+For the definition of struct kvm_nested_state, see KVM_GET_NESTED_STATE.
 
 4.116 KVM_(UN)REGISTER_COALESCED_MMIO