Merge branch 'linus' into tracing/mmiotrace

35 files changed, 420 insertions, 90 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5ac1e01bbd48..5f500977b42f 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -14,6 +14,10 @@ MAJOR:MINOR
 	non-block filesystems which provide their own BDI, such as NFS
 	and FUSE.
 
+MAJOR:MINOR-fuseblk
+
+	Value of st_dev on fuseblk filesystems.
+
 default
 
 	The default backing dev, used for non-block device backed
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 77c42f40be5d..2510763295d0 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -703,6 +703,31 @@
 </sect1>
 </chapter>
 
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+  <para>
+   There are functions that try to acquire a lock only once and immediately
+   return a value telling about success or failure to acquire the lock.
+   They can be used if you need no access to the data protected with the lock
+   when some other thread is holding the lock. You should acquire the lock
+   later if you then need access to the data protected with the lock.
+  </para>
+
+  <para>
+    <function>spin_trylock()</function> does not spin but returns non-zero if
+    it acquires the spinlock on the first try or 0 if not. This function can
+    be used in all contexts like <function>spin_lock</function>: you must have
+    disabled the contexts that might interrupt you and acquire the spin lock.
+  </para>
+
+  <para>
+    <function>mutex_trylock()</function> does not suspend your task
+    but returns non-zero if it could lock the mutex on the first try
+    or 0 if not. This function cannot be safely used in hardware or software
+    interrupt contexts despite not sleeping.
+  </para>
+</chapter>
+
   <chapter id="Examples">
    <title>Common Examples</title>
     <para>
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 028a8444d95e..e8acd1f03456 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -84,10 +84,9 @@
     runs an instance of gdb against the vmlinux file which contains
     the symbols (not boot image such as bzImage, zImage, uImage...).
     In gdb the developer specifies the connection parameters and
-    connects to kgdb.  Depending on which kgdb I/O modules exist in
-    the kernel for a given architecture, it may be possible to debug
-    the test machine's kernel with the development machine using a
-    rs232 or ethernet connection.
+    connects to kgdb.  The type of connection a developer makes with
+    gdb depends on the availability of kgdb I/O modules compiled as
+    builtin's or kernel modules in the test machine's kernel.
     </para>
   </chapter>
   <chapter id="CompilingAKernel">
@@ -223,7 +222,7 @@
   </para>
   <para>
   IMPORTANT NOTE: Using this option with kgdb over the console
-  (kgdboc) or kgdb over ethernet (kgdboe) is not supported.
+  (kgdboc) is not supported.
   </para>
   </sect1>
   </chapter>
@@ -249,18 +248,11 @@
     (gdb) target remote /dev/ttyS0
     </programlisting>
     <para>
-    Example (kgdb to a terminal server):
+    Example (kgdb to a terminal server on tcp port 2012):
     </para>
     <programlisting>
     % gdb ./vmlinux
-    (gdb) target remote udp:192.168.2.2:6443
-    </programlisting>
-    <para>
-    Example (kgdb over ethernet):
-    </para>
-    <programlisting>
-    % gdb ./vmlinux
-    (gdb) target remote udp:192.168.2.2:6443
+    (gdb) target remote 192.168.2.2:2012
     </programlisting>
     <para>
     Once connected, you can debug a kernel the way you would debug an
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9c93a03ea33b..118ca6e9404f 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -327,6 +327,52 @@ Some people also put extra tags at the end.  They'll just be ignored for
 now, but you can do this to mark internal company procedures or just
 point out some special detail about the sign-off. 
 
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c), you should ask the submitter to rediff, but this is a totally
+counter-productive waste of time and energy. Rule (b) allows you to adjust
+the code, but then it is very impolite to change one submitter's code and
+make him endorse your bugs. To solve this problem, it is recommended that
+you add a line between the last Signed-off-by header and yours, indicating
+the nature of your changes. While there is nothing mandatory about this, it
+seems like prepending the description with your mail and/or name, all
+enclosed in square brackets, is noticeable enough to make it obvious that
+you are responsible for last-minute changes. Example :
+
+	Signed-off-by: Random J Developer <random@developer.example.org>
+	[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+	Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practise is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practise
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in 2.6-stable :
+
+    Date:   Tue May 13 19:10:30 2008 +0000
+
+        SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+
+        commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+
+And here's what appears in 2.4 :
+
+    Date:   Tue May 13 22:12:27 2008 +0200
+
+        wireless, airo: waitbusy() won't delay
+
+        [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to trouble-shoot bugs in your
+tree.
+
 
 13) When to use Acked-by: and Cc:
 
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt
index 8aa7529f8258..cd784f46bf8a 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.txt
@@ -24,6 +24,8 @@ There are three different groups of fields in the struct taskstats:
 
 4) Per-task and per-thread context switch count statistics
 
+5) Time accounting for SMT machines
+
 Future extension should add fields to the end of the taskstats struct, and
 should not change the relative position of each field within the struct.
 
@@ -164,4 +166,8 @@ struct taskstats {
 	__u64	nvcsw;			/* Context voluntary switch counter */
 	__u64	nivcsw;			/* Context involuntary switch counter */
 
+5) Time accounting for SMT machines
+	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
+	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
+	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
 }
diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b
index b714183d4125..eb7be393a510 100644
--- a/Documentation/auxdisplay/cfag12864b
+++ b/Documentation/auxdisplay/cfag12864b
@@ -3,7 +3,7 @@
 	===================================
 
 License:		GPLv2
-Author & Maintainer:	Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Author & Maintainer:	Miguel Ojeda Sandonis
 Date:			2006-10-27
 
 
@@ -22,7 +22,7 @@ Date:			2006-10-27
 1. DRIVER INFORMATION
 ---------------------
 
-This driver support one cfag12864b display at time.
+This driver supports a cfag12864b LCD.
 
 
 ---------------------
diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c
index 7bfac354d4c9..2caeea5e4993 100644
--- a/Documentation/auxdisplay/cfag12864b-example.c
+++ b/Documentation/auxdisplay/cfag12864b-example.c
@@ -4,7 +4,7 @@
  * Description: cfag12864b LCD userspace example program
  *     License: GPLv2
  *
- *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *      Author: Copyright (C) Miguel Ojeda Sandonis
  *        Date: 2006-10-31
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/Documentation/auxdisplay/ks0108 b/Documentation/auxdisplay/ks0108
index 92b03b60c613..8ddda0c8ceef 100644
--- a/Documentation/auxdisplay/ks0108
+++ b/Documentation/auxdisplay/ks0108
@@ -3,7 +3,7 @@
 	==========================================
 
 License:		GPLv2
-Author & Maintainer:	Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Author & Maintainer:	Miguel Ojeda Sandonis
 Date:			2006-10-27
 
 
@@ -21,7 +21,7 @@ Date:			2006-10-27
 1. DRIVER INFORMATION
 ---------------------
 
-This driver support the ks0108 LCD controller.
+This driver supports the ks0108 LCD controller.
 
 
 ---------------------
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index e65736c6b8bc..63e59b8847c5 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -21,6 +21,11 @@ This driver is known to work with the following cards:
 	* SA E200
 	* SA E200i
 	* SA E500
+	* SA P212
+	* SA P410
+	* SA P410i
+	* SA P411
+	* SA P812
 
 Detecting drive failures:
 -------------------------
diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt
index 824fc0274471..d9014aa0eb68 100644
--- a/Documentation/cgroups.txt
+++ b/Documentation/cgroups.txt
@@ -390,6 +390,10 @@ If you have several tasks to attach, you have to do it one after another:
 	...
 # /bin/echo PIDn > tasks
 
+You can attach the current shell task by echoing 0:
+
+# echo 0 > tasks
+
 3. Kernel API
 =============
 
diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt
index 4dcea42432c2..7cc6e6a60672 100644
--- a/Documentation/controllers/devices.txt
+++ b/Documentation/controllers/devices.txt
@@ -13,7 +13,7 @@ either an integer or * for all.  Access is a composition of r
 The root device cgroup starts with rwm to 'all'.  A child device
 cgroup gets a copy of the parent.  Administrators can then remove
 devices from the whitelist or add new entries.  A child cgroup can
-never receive a device access which is denied its parent.  However
+never receive a device access which is denied by its parent.  However
 when a device access is removed from a parent it will not also be
 removed from the child(ren).
 
@@ -29,7 +29,11 @@ allows cgroup 1 to read and mknod the device usually known as
 
 	echo a > /cgroups/1/devices.deny
 
-will remove the default 'a *:* mrw' entry.
+will remove the default 'a *:* rwm' entry. Doing
+
+	echo a > /cgroups/1/devices.allow
+
+will add the 'a *:* rwm' entry to the whitelist.
 
 3. Security
 
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 6a9c55bd556b..dcec0564d040 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -129,14 +129,6 @@ to its default value of '80' it means that between the checking
 intervals the CPU needs to be on average more than 80% in use to then
 decide that the CPU frequency needs to be increased.  
 
-sampling_down_factor: this parameter controls the rate that the CPU
-makes a decision on when to decrease the frequency.  When set to its
-default value of '5' it means that at 1/5 the sampling_rate the kernel
-makes a decision to lower the frequency.  Five "lower rate" decisions
-have to be made in a row before the CPU frequency is actually lower.
-If set to '1' then the frequency decreases as quickly as it increases,
-if set to '2' it decreases at half the rate of the increase.
-
 ignore_nice_load: this parameter takes a value of '0' or '1'. When
 set to '0' (its default), all processes are counted towards the
 'cpu utilisation' value.  When set to '1', the processes that are
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index fb7b361e6eea..1f5a924d1e56 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -154,13 +154,15 @@ browsing and modifying the cpusets presently known to the kernel.  No
 new system calls are added for cpusets - all support for querying and
 modifying cpusets is via this cpuset file system.
 
-The /proc/<pid>/status file for each task has two added lines,
+The /proc/<pid>/status file for each task has four added lines,
 displaying the tasks cpus_allowed (on which CPUs it may be scheduled)
 and mems_allowed (on which Memory Nodes it may obtain memory),
-in the format seen in the following example:
+in the two formats seen in the following example:
 
   Cpus_allowed:   ffffffff,ffffffff,ffffffff,ffffffff
+  Cpus_allowed_list:      0-127
   Mems_allowed:   ffffffff,ffffffff
+  Mems_allowed_list:      0-63
 
 Each cpuset is represented by a directory in the cgroup file system
 containing (on top of the standard cgroup files) the following
@@ -199,7 +201,7 @@ using the sched_setaffinity, mbind and set_mempolicy system calls.
 The following rules apply to each cpuset:
 
  - Its CPUs and Memory Nodes must be a subset of its parents.
- - It can only be marked exclusive if its parent is.
+ - It can't be marked exclusive unless its parent is.
  - If its cpu or memory is exclusive, they may not overlap any sibling.
 
 These rules, and the natural hierarchy of cpusets, enable efficient
@@ -345,7 +347,7 @@ is modified to perform an inline check for this PF_SPREAD_PAGE task
 flag, and if set, a call to a new routine cpuset_mem_spread_node()
 returns the node to prefer for the allocation.
 
-Similarly, setting 'memory_spread_cache' turns on the flag
+Similarly, setting 'memory_spread_slab' turns on the flag
 PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
 pages from the node returned by cpuset_mem_spread_node().
 
@@ -542,7 +544,10 @@ otherwise initial value -1 that indicates the cpuset has no request.
    2  : search cores in a package.
    3  : search cpus in a node [= system wide on non-NUMA system]
  ( 4  : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5  : search system wide [on NUMA system] )
+
+The system default is architecture dependent.  The system default
+can be changed using the relax_domain_level= boot parameter.
 
 This file is per-cpuset and affect the sched domain where the cpuset
 belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset
@@ -709,7 +714,10 @@ Now you want to do something with this cpuset.
 
 In this directory you can find several files:
 # ls
-cpus  cpu_exclusive  mems  mem_exclusive mem_hardwall  tasks
+cpu_exclusive  memory_migrate      mems                      tasks
+cpus           memory_pressure     notify_on_release
+mem_exclusive  memory_spread_page  sched_load_balance
+mem_hardwall   memory_spread_slab  sched_relax_domain_level
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5b3f31faed56..46ece3fba6f9 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -312,3 +312,12 @@ When:	2.6.26
 Why:	Implementation became generic; users should now include
 	linux/semaphore.h instead.
 Who:	Matthew Wilcox <willy@linux.intel.com>
+
+---------------------------
+
+What:	CONFIG_THERMAL_HWMON
+When:	January 2009
+Why:	This option was introduced just to allow older lm-sensors userspace
+	to keep working over the upgrade to 2.6.26. At the scheduled time of
+	removal fixed lm-sensors (2.x or 3.x) should be readily available.
+Who:	Rene Herman <rene.herman@gmail.com>
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 560f88dc7090..0c5086db8352 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -139,8 +139,16 @@ commit=nrsec	(*)	Ext4 can be told to sync all its data and metadata
 			Setting it to very large values will improve
 			performance.
 
-barrier=1		This enables/disables barriers.  barrier=0 disables
-			it, barrier=1 enables it.
+barrier=<0|1(*)>	This enables/disables the use of write barriers in
+			the jbd code.  barrier=0 disables, barrier=1 enables.
+			This also requires an IO stack which can support
+			barriers, and if jbd gets an error on a barrier
+			write, it will disable again with a warning.
+			Write barriers enforce proper on-disk ordering
+			of journal commits, making volatile disk write caches
+			safe to use, at some performance penalty.  If
+			your disks are battery-backed in one way or another,
+			disabling barriers may safely improve performance.
 
 orlov		(*)	This enables the new Orlov block allocator. It is
 			enabled by default.
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 5daa2aaec2c5..68ef48839c04 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -36,6 +36,7 @@ files, each with their own function.
        local_cpus	   nearby CPU mask (cpumask, ro)
        resource		   PCI resource host addresses (ascii, ro)
        resource0..N	   PCI resource N, if present (binary, mmap)
+       resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
        rom		   PCI ROM resource, if present (binary, ro)
        subsystem_device	   PCI subsystem device (ascii, ro)
        subsystem_vendor	   PCI subsystem vendor (ascii, ro)
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
new file mode 100644
index 000000000000..2fefaf582a43
--- /dev/null
+++ b/Documentation/hwmon/ibmaem
@@ -0,0 +1,37 @@
+Kernel driver ibmaem
+======================
+
+Supported systems:
+  * Any recent IBM System X server with Active Energy Manager support.
+    This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+    x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
+    driver ("ipmi-si") needs to be loaded for this driver to do anything.
+    Prefix: 'ibmaem'
+    Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power
+meters available on various IBM System X hardware through the BMC.  All
+sensor banks will be exported as platform devices; this driver can talk
+to both v1 and v2 interfaces.  This driver is completely separate from the
+older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use.
+There is a register that displays an estimate of raw energy consumption
+since the last BMC reset, and a power sensor that returns average power
+use over a configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present
+a wider range of energy and power use registers, the power cap as
+set by the AEM software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by
+the Active Energy Manager software.  Setting the power cap from the host
+is not currently supported.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index f4a8ebc1ef1a..2d845730d4e0 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -2,17 +2,12 @@ Naming and data format standards for sysfs files
 ------------------------------------------------
 
 The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
 
 Note that motherboards vary widely in the connections to sensor chips.
 There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs
 will have to implement conversion, labeling and hiding of inputs. For
 this reason, it is still not recommended to bypass the library.
 
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
 Each chip gets its own directory in the sysfs /sys/devices tree.  To
 find all sensor chips, it is easier to follow the device symlinks from
 /sys/class/hwmon/hwmon*.
 
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
 All sysfs values are fixed point numbers.
 
 There is only one value per file, unlike the older /proc specification.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index ee75cbace28d..d4cd4126d1ad 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -25,12 +25,23 @@ routines, and should be zero-initialized except for fields with data you
 provide.  A client structure holds device-specific information like the
 driver model device node, and its I2C address.
 
+/* iff driver uses driver model ("new style") binding model: */
+
+static struct i2c_device_id foo_idtable[] = {
+	{ "foo", my_id_for_foo },
+	{ "bar", my_id_for_bar },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, foo_idtable);
+
 static struct i2c_driver foo_driver = {
 	.driver = {
 		.name	= "foo",
 	},
 
 	/* iff driver uses driver model ("new style") binding model: */
+	.id_table	= foo_ids,
 	.probe		= foo_probe,
 	.remove		= foo_remove,
 
@@ -173,10 +184,9 @@ handle may be used during foo_probe().  If foo_probe() reports success
 (zero not a negative status code) it may save the handle and use it until
 foo_remove() returns.  That binding model is used by most Linux drivers.
 
-Drivers match devices when i2c_client.driver_name and the driver name are
-the same; this approach is used in several other busses that don't have
-device typing support in the hardware.  The driver and module name should
-match, so hotplug/coldplug mechanisms will modprobe the driver.
+The probe function is called when an entry in the id_table name field
+matches the device's name. It is passed the entry that was matched so
+the driver knows which one in the table matched.
 
 
 Device Creation (Standard driver model)
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 2075c0658bf5..0bd32748a467 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -1,6 +1,105 @@
 kernel-doc nano-HOWTO
 =====================
 
+How to format kernel-doc comments
+---------------------------------
+
+In order to provide embedded, 'C' friendly, easy to maintain,
+but consistent and extractable documentation of the functions and
+data structures in the Linux kernel, the Linux kernel has adopted
+a consistent style for documenting functions and their parameters,
+and structures and their members.
+
+The format for this documentation is called the kernel-doc format.
+It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
+
+This style embeds the documentation within the source files, using
+a few simple conventions.  The scripts/kernel-doc perl script, some
+SGML templates in Documentation/DocBook, and other tools understand
+these conventions, and are used to extract this embedded documentation
+into various documents.
+
+In order to provide good documentation of kernel functions and data
+structures, please use the following conventions to format your
+kernel-doc comments in Linux kernel source.
+
+We definitely need kernel-doc formatted documentation for functions
+that are exported to loadable modules using EXPORT_SYMBOL.
+
+We also look to provide kernel-doc formatted documentation for
+functions externally visible to other kernel files (not marked
+"static").
+
+We also recommend providing kernel-doc formatted documentation
+for private (file "static") routines, for consistency of kernel
+source code layout.  But this is lower priority and at the
+discretion of the MAINTAINER of that kernel source file.
+
+Data structures visible in kernel include files should also be
+documented using kernel-doc formatted comments.
+
+The opening comment mark "/**" is reserved for kernel-doc comments.
+Only comments so marked will be considered by the kernel-doc scripts,
+and any comment so marked must be in kernel-doc format.  Do not use
+"/**" to be begin a comment block unless the comment block contains
+kernel-doc formatted comments.  The closing comment marker for
+kernel-doc comments can be either "*/" or "**/".
+
+Kernel-doc comments should be placed just before the function
+or data structure being described.
+
+Example kernel-doc function comment:
+
+/**
+ * foobar() - short function description of foobar
+ * @arg1:	Describe the first argument to foobar.
+ * @arg2:	Describe the second argument to foobar.
+ *		One can provide multiple line descriptions
+ *		for arguments.
+ *
+ * A longer description, with more discussion of the function foobar()
+ * that might be useful to those using or modifying it.  Begins with
+ * empty comment line, and may include additional embedded empty
+ * comment lines.
+ *
+ * The longer description can have multiple paragraphs.
+ **/
+
+The first line, with the short description, must be on a single line.
+
+The @argument descriptions must begin on the very next line following
+this opening short function description line, with no intervening
+empty comment lines.
+
+Example kernel-doc data structure comment.
+
+/**
+ * struct blah - the basic blah structure
+ * @mem1:	describe the first member of struct blah
+ * @mem2:	describe the second member of struct blah,
+ *		perhaps with more lines and words.
+ *
+ * Longer description of this structure.
+ **/
+
+The kernel-doc function comments describe each parameter to the
+function, in order, with the @name lines.
+
+The kernel-doc data structure comments describe each structure member
+in the data structure, with the @name lines.
+
+The longer description formatting is "reflowed", losing your line
+breaks.  So presenting carefully formatted lists within these
+descriptions won't work so well; derived documentation will lose
+the formatting.
+
+See the section below "How to add extractable documentation to your
+source files" for more details and notes on how to format kernel-doc
+comments.
+
+Components of the kernel-doc system
+-----------------------------------
+
 Many places in the source tree have extractable documentation in the
 form of block comments above functions.  The components of this system
 are:
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 5a4ef48224ae..28cdc2af2131 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -715,14 +715,14 @@
 
      * Name: "Gary's Encyclopedia - The Linux Kernel"
        Author: Gary (I suppose...).
-       URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
-       Keywords: links, not found here?.
+       URL: http://slencyclopedia.berlios.de/index.html
+       Keywords: linux, community, everything!
        Description: Gary's Encyclopedia exists to allow the rapid finding
        of documentation and other information of interest to GNU/Linux
        users. It has about 4000 links to external pages in 150 major
        categories. This link is for kernel-specific links, documents,
-       sites... Look there if you could not find here what you were
-       looking for.
+       sites...  This list is now hosted by developer.Berlios.de,
+       but seems not to have been updated since sometime in 1999.
 
      * Name: "The home page of Linux-MM"
        Author: The Linux-MM team.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e07c432c731f..b52f47d588b4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -295,7 +295,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when initialising the APIC and IO-APIC components.
 
 	apm=		[APM] Advanced Power Management
-			See header of arch/i386/kernel/apm.c.
+			See header of arch/x86/kernel/apm_32.c.
 
 	arcrimi=	[HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
 			Format: <io>,<irq>,<nodeID>
@@ -638,7 +638,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	elanfreq=	[X86-32]
 			See comment before function elanfreq_setup() in
-			arch/i386/kernel/cpu/cpufreq/elanfreq.c.
+			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
 			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
@@ -1679,6 +1679,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <reboot_mode>[,<reboot_mode2>[,...]]
 			See arch/*/kernel/reboot.c or arch/*/kernel/process.c			
 
+	relax_domain_level=
+			[KNL, SMP] Set scheduler's default relax_domain_level.
+			See Documentation/cpusets.txt.
+
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
 	reservetop=	[X86-32]
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index bf3256e04027..51a8021ee532 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -305,7 +305,7 @@ should not be manipulated by any other user.
 
 A kset keeps its children in a standard kernel linked list.  Kobjects point
 back to their containing kset via their kset field. In almost all cases,
-the kobjects belonging to a ket have that kset (or, strictly, its embedded
+the kobjects belonging to a kset have that kset (or, strictly, its embedded
 kobject) in their parent.
 
 As a kset contains a kobject within it, it should always be dynamically
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 01c6c3d8a7e3..64b3f146e4b0 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -503,7 +503,7 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
-SW_RADIO	T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL	T60 and later hardare rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 
 Non hot-key ACPI HKEY event map:
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 3be8ab2a886a..82fafe0429fe 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -157,6 +157,9 @@ struct virtqueue
 
 	/* The routine to call when the Guest pings us. */
 	void (*handle_output)(int fd, struct virtqueue *me);
+
+	/* Outstanding buffers */
+	unsigned int inflight;
 };
 
 /* Remember the arguments to the program so we can "reboot" */
@@ -702,6 +705,7 @@ static unsigned get_vq_desc(struct virtqueue *vq,
 			errx(1, "Looped descriptor");
 	} while ((i = next_desc(vq, i)) != vq->vring.num);
 
+	vq->inflight++;
 	return head;
 }
 
@@ -719,6 +723,7 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len)
 	/* Make sure buffer is written before we update index. */
 	wmb();
 	vq->vring.used->idx++;
+	vq->inflight--;
 }
 
 /* This actually sends the interrupt for this virtqueue */
@@ -726,8 +731,9 @@ static void trigger_irq(int fd, struct virtqueue *vq)
 {
 	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
 
-	/* If they don't want an interrupt, don't send one. */
-	if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	/* If they don't want an interrupt, don't send one, unless empty. */
+	if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+	    && vq->inflight)
 		return;
 
 	/* Send the Guest an interrupt tell them we used something up. */
@@ -1107,6 +1113,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
+	vq->inflight = 0;
 
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
@@ -1368,6 +1375,7 @@ static void setup_tun_net(const char *arg)
 
 	/* Tell Guest what MAC address to use. */
 	add_feature(dev, VIRTIO_NET_F_MAC);
+	add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
 	set_config(dev, sizeof(conf), &conf);
 
 	/* We don't need the socket any more; setup is done. */
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
index 770fc41a78e8..796012540386 100644
--- a/Documentation/networking/arcnet.txt
+++ b/Documentation/networking/arcnet.txt
@@ -46,7 +46,7 @@ These are the ARCnet drivers for Linux.
 
 
 This new release (2.91) has been put together by David Woodhouse 
-<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support 
+<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
 for yet another chipset. Now the generic support has been separated from the
 individual chipset drivers, and the source files aren't quite so packed with
 #ifdefs! I've changed this file a bit, but kept it in the first person from
diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt
index bdae2db4119c..bec69a8a1697 100644
--- a/Documentation/networking/bridge.txt
+++ b/Documentation/networking/bridge.txt
@@ -1,6 +1,6 @@
 In order to use the Ethernet bridging functionality, you'll need the
 userspace tools. These programs and documentation are available
-at http://bridge.sourceforge.net.  The download page is
+at http://www.linux-foundation.org/en/Net:Bridge.  The download page is
 http://prdownloads.sourceforge.net/bridge.
 
 If you still have questions, don't hesitate to post to the mailing list 
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 17a6e46fbd43..17f1f91af35c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -81,23 +81,23 @@ inet_peer_minttl - INTEGER
 	Minimum time-to-live of entries.  Should be enough to cover fragment
 	time-to-live on the reassembling side.  This minimum time-to-live  is
 	guaranteed if the pool size is less than inet_peer_threshold.
-	Measured in jiffies(1).
+	Measured in seconds.
 
 inet_peer_maxttl - INTEGER
 	Maximum time-to-live of entries.  Unused entries will expire after
 	this period of time if there is no memory pressure on the pool (i.e.
 	when the number of entries in the pool is very small).
-	Measured in jiffies(1).
+	Measured in seconds.
 
 inet_peer_gc_mintime - INTEGER
 	Minimum interval between garbage collection passes.  This interval is
 	in effect under high memory pressure on the pool.
-	Measured in jiffies(1).
+	Measured in seconds.
 
 inet_peer_gc_maxtime - INTEGER
 	Minimum interval between garbage collection passes.  This interval is
 	in effect under low (or absent) memory pressure on the pool.
-	Measured in jiffies(1).
+	Measured in seconds.
 
 TCP variables: 
 
@@ -794,10 +794,6 @@ tag - INTEGER
 	Allows you to write a number, which can be used as required.
 	Default value is 0.
 
-(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the
-Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact
-value on your system. 
-
 Alexey Kuznetsov.
 kuznet@ms2.inr.ac.ru
 
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index 4bde53e85f3f..1e28e2ddb90a 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -83,9 +83,9 @@ Valid range: Limited by memory on system
 Default: 30 
 
 e. intr_type
-Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
-Valid range: 1-3
-Default: 1 
+Specifies interrupt type. Possible values 0(INTA), 2(MSI-X)
+Valid values: 0, 2
+Default: 2
 
 5.  Performance suggestions
 General:
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index aaae360312e4..86d1c8e7b18f 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -1,4 +1,4 @@
   0 -> Unknown board                            (au0828)
-  1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200]
+  1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 543957346469..7cf5685d3645 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -60,7 +60,7 @@
  59 -> DViCO FusionHDTV 5 PCI nano                         [18ac:d530]
  60 -> Pinnacle Hybrid PCTV                                [12ab:1788]
  61 -> Winfast TV2000 XP Global                            [107d:6f18]
- 62 -> PowerColor Real Angel 330                           [14f1:ea3d]
+ 62 -> PowerColor RA330                                    [14f1:ea3d]
  63 -> Geniatech X8000-MT DVBT                             [14f1:8852]
  64 -> DViCO FusionHDTV DVB-T PRO                          [18ac:db30]
  65 -> DViCO FusionHDTV 7 Gold                             [18ac:d610]
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 077d56ec3f3d..6842c262890f 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -1,7 +1,9 @@
 Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
 encoder chip:
 
-1) The only hardware currently supported is the Hauppauge HVR-1600.
+1) The only hardware currently supported is the Hauppauge HVR-1600
+   card and the Compro VideoMate H900 (note that this card only
+   supports analog input, it has no digital tuner!).
 
 2) Some people have problems getting the i2c bus to work. Cause unknown.
    The symptom is that the eeprom cannot be read and the card is
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
new file mode 100644
index 000000000000..ce72c0fe6177
--- /dev/null
+++ b/Documentation/vm/pagemap.txt
@@ -0,0 +1,77 @@
+pagemap, from the userspace perspective
+---------------------------------------
+
+pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
+userspace programs to examine the page tables and related information by
+reading files in /proc.
+
+There are three components to pagemap:
+
+ * /proc/pid/pagemap.  This file lets a userspace process find out which
+   physical frame each virtual page is mapped to.  It contains one 64-bit
+   value for each virtual page, containing the following data (from
+   fs/proc/task_mmu.c, above pagemap_read):
+
+    * Bits 0-55  page frame number (PFN) if present
+    * Bits 0-4   swap type if swapped
+    * Bits 5-55  swap offset if swapped
+    * Bits 55-60 page shift (page size = 1<<page shift)
+    * Bit  61    reserved for future use
+    * Bit  62    page swapped
+    * Bit  63    page present
+
+   If the page is not present but in swap, then the PFN contains an
+   encoding of the swap file number and the page's offset into the
+   swap. Unmapped pages return a null PFN. This allows determining
+   precisely which pages are mapped (or in swap) and comparing mapped
+   pages between processes.
+
+   Efficient users of this interface will use /proc/pid/maps to
+   determine which areas of memory are actually mapped and llseek to
+   skip over unmapped regions.
+
+ * /proc/kpagecount.  This file contains a 64-bit count of the number of
+   times each page is mapped, indexed by PFN.
+
+ * /proc/kpageflags.  This file contains a 64-bit set of flags for each
+   page, indexed by PFN.
+
+   The flags are (from fs/proc/proc_misc, above kpageflags_read):
+
+     0. LOCKED
+     1. ERROR
+     2. REFERENCED
+     3. UPTODATE
+     4. DIRTY
+     5. LRU
+     6. ACTIVE
+     7. SLAB
+     8. WRITEBACK
+     9. RECLAIM
+    10. BUDDY
+
+Using pagemap to do something useful:
+
+The general procedure for using pagemap to find out about a process' memory
+usage goes like this:
+
+ 1. Read /proc/pid/maps to determine which parts of the memory space are
+    mapped to what.
+ 2. Select the maps you are interested in -- all of them, or a particular
+    library, or the stack or the heap, etc.
+ 3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
+ 4. Read a u64 for each page from pagemap.
+ 5. Open /proc/kpagecount and/or /proc/kpageflags.  For each PFN you just
+    read, seek to that entry in the file, and read the data you want.
+
+For example, to find the "unique set size" (USS), which is the amount of
+memory that a process is using that is not shared with any other process,
+you can go through every map in the process, find the PFNs, look those up
+in kpagecount, and tally up the number of pages that are only referenced
+once.
+
+Other notes:
+
+Reading from any of the files will return -EINVAL if you are not starting
+the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
+into the file), or if the size of the read is not a multiple of 8 bytes.
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
index e4230ed16ee7..df3227605d59 100644
--- a/Documentation/vm/slabinfo.c
+++ b/Documentation/vm/slabinfo.c
@@ -1,7 +1,7 @@
 /*
  * Slabinfo: Tool to get reports about slabs
  *
- * (C) 2007 sgi, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 sgi, Christoph Lameter
  *
  * Compile by:
  *
@@ -99,7 +99,7 @@ void fatal(const char *x, ...)
 
 void usage(void)
 {
-	printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n"
+	printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n"
 		"slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n"
 		"-a|--aliases           Show aliases\n"
 		"-A|--activity          Most active slabs first\n"
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 7c13f22a0c9e..bb1f5c6e28b3 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -266,4 +266,4 @@ of other objects.
 
 	slub_debug=FZ,dentry
 
-Christoph Lameter, <clameter@sgi.com>, May 30, 2007
+Christoph Lameter, May 30, 2007