Merge tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:

   - Add a way for drivers to tell the core the supported alarm range is
     smaller than the date range. This is not used yet but will be
     useful for the alarmtimers in the next release.

   - fix Wvoid-pointer-to-enum-cast warnings

   - remove redundant of_match_ptr()

   - stop warning for invalid alarms when the alarm is disabled

  Drivers:

   - isl12022: allow setting the trip level for battery level detection

   - pcf2127: add support for PCF2131 and multiple timestamps

   - stm32: time precision improvement, many fixes

   - twl: NVRAM support"

* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
  dt-bindings: rtc: ds3231: Remove text binding
  rtc: wm8350: remove unnecessary messages
  rtc: twl: remove unnecessary messages
  rtc: sun6i: remove unnecessary message
  rtc: stop warning for invalid alarms when the alarm is disabled
  rtc: twl: add NVRAM support
  rtc: pcf85363: Allow to wake up system without IRQ
  rtc: m48t86: add DT support for m48t86
  dt-bindings: rtc: Add ST M48T86
  rtc: pcf2127: remove useless check
  rtc: rzn1: Report maximum alarm limit to rtc core
  rtc: ds1305: Report maximum alarm limit to rtc core
  rtc: tps6586x: Report maximum alarm limit to rtc core
  rtc: cmos: Report supported alarm limit to rtc infrastructure
  rtc: cros-ec: Detect and report supported alarm window size
  rtc: Add support for limited alarm timer offsets
  rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
  MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
  rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
  rtc: omap: Do not check for 0 return after calling platform_get_irq()
  ...

6 files changed, 114 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
index 4d2bef15fb7a..c8bb2eef442d 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
@@ -14,13 +14,17 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - atmel,at91rm9200-rtc
-      - atmel,at91sam9x5-rtc
-      - atmel,sama5d4-rtc
-      - atmel,sama5d2-rtc
-      - microchip,sam9x60-rtc
-      - microchip,sama7g5-rtc
+    oneOf:
+      - enum:
+          - atmel,at91rm9200-rtc
+          - atmel,at91sam9x5-rtc
+          - atmel,sama5d4-rtc
+          - atmel,sama5d2-rtc
+          - microchip,sam9x60-rtc
+          - microchip,sama7g5-rtc
+      - items:
+          - const: microchip,sam9x7-rtc
+          - const: microchip,sam9x60-rtc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml b/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
new file mode 100644
index 000000000000..c2d1441ef273
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/intersil,isl12022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL12022 Real-time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: isil,isl12022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  isil,battery-trip-levels-microvolt:
+    description:
+      The battery voltages at which the first alarm and second alarm
+      should trigger (normally ~85% and ~75% of nominal V_BAT).
+    items:
+      - enum: [2125000, 2295000, 2550000, 2805000, 3060000, 4250000, 4675000]
+      - enum: [1875000, 2025000, 2250000, 2475000, 2700000, 3750000, 4125000]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  # If #clock-cells is present, interrupts must not be present
+  - if:
+      required:
+        - '#clock-cells'
+    then:
+      properties:
+        interrupts: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "isil,isl12022";
+            reg = <0x6f>;
+            interrupts-extended = <&gpio1 5 IRQ_TYPE_LEVEL_LOW>;
+            isil,battery-trip-levels-microvolt = <2550000>, <2250000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt
deleted file mode 100644
index 85be53a42180..000000000000
--- a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Maxim DS3231 Real Time Clock
-
-Required properties:
-- compatible: Should contain "maxim,ds3231".
-- reg: I2C address for chip.
-
-Optional property:
-- #clock-cells: Should be 1.
-- clock-output-names:
-  overwrite the default clock names "ds3231_clk_sqw" and "ds3231_clk_32khz".
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
-    - 0: square-wave output on the SQW pin
-    - 1: square-wave output on the 32kHz pin
-
-- interrupts: rtc alarm/event interrupt. When this property is selected,
-  clock on the SQW pin cannot be used.
-
-Example:
-
-ds3231: ds3231@51 {
-	compatible = "maxim,ds3231";
-	reg = <0x68>;
-	#clock-cells = <1>;
-};
-
-device1 {
-...
-	clocks = <&ds3231 0>;
-...
-};
-
-device2 {
-...
-	clocks = <&ds3231 1>;
-...
-};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
index bcb230027622..2d9fe5a75b06 100644
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
@@ -18,6 +18,7 @@ properties:
       - nxp,pca2129
       - nxp,pcf2127
       - nxp,pcf2129
+      - nxp,pcf2131
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/rtc/st,m48t86.yaml b/Documentation/devicetree/bindings/rtc/st,m48t86.yaml
new file mode 100644
index 000000000000..e3e12fa23380
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/st,m48t86.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,m48t86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST M48T86 / Dallas DS12887 RTC with SRAM
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml
+
+properties:
+  compatible:
+    enum:
+      - st,m48t86
+
+  reg:
+    items:
+      - description: index register
+      - description: data register
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    rtc@10800000 {
+      compatible = "st,m48t86";
+      reg = <0x10800000 0x1>, <0x11700000 0x1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index 9af77f21bb7f..2a65f31ac5a0 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -45,8 +45,6 @@ properties:
       - isil,isl1208
       # Intersil ISL1218 Low Power RTC with Battery Backed SRAM
       - isil,isl1218
-      # Intersil ISL12022 Real-time Clock
-      - isil,isl12022
       # Real Time Clock Module with I2C-Bus
       - microcrystal,rv3029
       # Real Time Clock