Merge tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Microchip PolarFire
   - Nuvoton NCT3018Y
   - TI K3 RTC

  Subsystem:
   - Replace flush_scheduled_work() with flush_work()
   - Remove deprecated ida_simple_get()/ida_simple_remove() calls

  Drivers:
   - use simple i2c probe where possible
   - sun6i: add R329 support
   - zynqmp: add calibration support
   - vr41xx: remove unused driver"

* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: spear: set range max
  rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
  rtc: zynqmp: initialize fract_tick
  rtc: Add NCT3018Y real time clock driver
  dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
  dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
  dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
  rtc: rx8025: fix 12/24 hour mode detection on RX-8035
  rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
  rtc: vr41xx: remove driver
  rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
  rtc: rv8803: fix missing unlock on error in rv8803_set_time()
  rtc: zynqmp: Add calibration set and get support
  rtc: zynqmp: Updated calibration value
  dt-bindings: rtc: zynqmp: Add clock information
  rtc: sun6i: add support for R329 RTC
  rtc: Directly use ida_alloc()/free()
  rtc: Introduce ti-k3-rtc
  dt-bindings: rtc: Add TI K3 RTC description
  dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
  ...

8 files changed, 214 insertions, 34 deletions

diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index 9593840a4a2b..60f9027e8299 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -32,6 +32,7 @@ properties:
       - 11000
 
   trickle-voltage-millivolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 1750
       - 3000
diff --git a/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
new file mode 100644
index 000000000000..7a1857f5caa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,nct3018y.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NUVOTON NCT3018Y Real Time Clock
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Medad CChien <ctcchien@nuvoton.com>
+  - Mia Lin <mimi05633@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,nct3018y
+
+  reg:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "nuvoton,nct3018y";
+            reg = <0x6f>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
deleted file mode 100644
index 217b7cd06c11..000000000000
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* NXP PCF85063 Real Time Clock
-
-Required properties:
-- compatible: Should one of contain:
-	"nxp,pca85073a",
-	"nxp,pcf85063",
-	"nxp,pcf85063a",
-	"nxp,pcf85063tp",
-	"microcrystal,rv8263"
-- reg: I2C address for chip.
-
-Optional property:
-- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
-  expressed in femto Farad (fF). Valid values are 7000 and 12500.
-  Default value (if no value is specified) is 7000fF.
-
-Optional child node:
-- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
-
-Example:
-
-pcf85063: rtc@51 {
-	compatible = "nxp,pcf85063";
-	reg = <0x51>;
-	quartz-load-femtofarads = <12500>;
-
-		clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
new file mode 100644
index 000000000000..2f892f8640d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF85063 Real Time Clock
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+properties:
+  compatible:
+    enum:
+      - microcrystal,rv8263
+      - nxp,pcf85063
+      - nxp,pcf85063a
+      - nxp,pcf85063tp
+      - nxp,pca85073a
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [7000, 12500]
+    default: 7000
+
+  clock:
+    $ref: /schemas/clock/fixed-clock.yaml
+    description:
+      Provide this if the square wave pin is used as boot-enabled
+      fixed clock.
+
+  wakeup-source: true
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microcrystal,rv8263
+    then:
+      properties:
+        quartz-load-femtofarads: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pcf85063
+    then:
+      properties:
+        quartz-load-femtofarads:
+          const: 7000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+          compatible = "nxp,pcf85063a";
+          reg = <0x51>;
+          quartz-load-femtofarads = <12500>;
+
+          clock {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <32768>;
+          };
+        };
+      };
diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
index 6fa7d9fc2dc7..23ab5bb4f395 100644
--- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PM8xxx PMIC RTC device
 
 maintainers:
-  - Satya Priya <skakit@codeaurora.org>
+  - Satya Priya <quic_c_skakit@quicinc.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
index 55a0c8874c03..7212076a8f1b 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -14,6 +14,8 @@ For MediaTek PMIC wrapper bus bindings, see:
 Required properties:
 - compatible: Should be one of follows
        "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6358-rtc": for MT6358 PMIC
+       "mediatek,mt6366-rtc", "mediatek,mt6358-rtc": for MT6366 PMIC
        "mediatek,mt6397-rtc": for MT6397 PMIC
 
 Example:
diff --git a/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
new file mode 100644
index 000000000000..d995ef04a6eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,k3-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Real Time Clock
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  This RTC appears in the AM62x family of SoCs.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,am62-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VBUS Interface clock
+      - description: 32k Clock source (external or internal).
+
+  clock-names:
+    items:
+      - const: vbus
+      - const: osc32k
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2b1f0000 {
+        compatible = "ti,am62-rtc";
+        reg = <0x2b1f0000 0x100>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&bar 0>;
+        clocks = <&foo 0>, <&foo 1>;
+        clock-names = "vbus", "osc32k";
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
index bdb72d3ddf2a..7ed0230f6c67 100644
--- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -23,8 +23,15 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
   interrupts:
-    minItems: 2
+    maxItems: 2
 
   interrupt-names:
     items:
@@ -39,6 +46,7 @@ properties:
     minimum: 0x1
     maximum: 0x1FFFFF
     default: 0x198233
+    deprecated: true
 
 required:
   - compatible
@@ -61,5 +69,7 @@ examples:
         interrupts = <0 26 4>, <0 27 4>;
         interrupt-names = "alarm", "sec";
         calibration = <0x198233>;
+        clock-names = "rtc";
+        clocks = <&rtc_clk>;
       };
     };