Merge tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - New staging driver for Rockship ISPv1 unit

 - New staging driver for Rockchip MIPI Synopsys DPHY RX0

 - y2038 fixes at V4L2 API (backward-compatible)

 - A dvb core fix when receiving invalid EIT sections

 - Some clang-specific warnings got fixed

 - Added support for touch V4L2 interface at vivid

 - Several drivers were converted to use the new
   i2c_new_scanned_device() kAPI

 - Added sm1 support at meson's vdec driver

 - Several other driver cleanups, fixes and improvements

* tag 'media/v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (207 commits)
  media: staging/intel-ipu3: remove TODO item about acronyms
  media: v4l2-fwnode: Print the node name while parsing endpoints
  media: Revert "media: staging/intel-ipu3: make imgu use fixed running mode"
  media: mt9v111: constify copied structure
  media: platform: VIDEO_MEDIATEK_JPEG can also depend on MTK_IOMMU
  media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value
  media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors
  media: hantro: fix post-processing NULL pointer dereference
  media: rcar-vin: Use correct pixel format when aligning format
  media: MAINTAINERS: add entry for Rockchip ISP1 driver
  media: staging: rkisp1: add TODO file for staging
  media: staging: rkisp1: add document for rkisp1 meta buffer format
  media: staging: rkisp1: add output device for parameters
  media: staging: rkisp1: add capture device for statistics
  media: staging: rkisp1: add user space ABI definitions
  media: staging: rkisp1: add streaming paths
  media: staging: rkisp1: add Rockchip ISP1 base driver
  media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver
  media: staging: dt-bindings: add Rockchip MIPI RX D-PHY RX0 yaml bindings
  media: staging: dt-bindings: add Rockchip ISP1 yaml bindings
  ...

20 files changed, 411 insertions, 240 deletions

diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 0f6374ceaa69..9af873b43acd 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -16,7 +16,15 @@ description: |-
 
 properties:
   compatible:
-    const: allwinner,sun7i-a20-csi0
+    oneOf:
+      - const: allwinner,sun4i-a10-csi1
+      - const: allwinner,sun7i-a20-csi0
+      - items:
+        - const: allwinner,sun7i-a20-csi1
+        - const: allwinner,sun4i-a10-csi1
+      - items:
+        - const: allwinner,sun8i-r40-csi0
+        - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -25,12 +33,16 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
+    maxItems: 3
     items:
       - description: The CSI interface clock
       - description: The CSI ISP clock
       - description: The CSI DRAM clock
 
   clock-names:
+    minItems: 2
+    maxItems: 3
     items:
       - const: bus
       - const: isp
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
new file mode 100644
index 000000000000..335717e15970
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Video Decoder
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+  - Maxime Jourdan <mjourdan@baylibre.com>
+
+description: |
+  The video decoding IP lies within the DOS memory region,
+  except for the hardware bitstream parser that makes use of an undocumented
+  region.
+
+  It makes use of the following blocks:
+  - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
+    then feed from this VIFIFO.
+  - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
+  - VDEC_HEVC can decode HEVC and VP9.
+
+  Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
+  concurrently.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - amlogic,gxbb-vdec # GXBB (S905)
+          - amlogic,gxl-vdec # GXL (S905X, S905D)
+          - amlogic,gxm-vdec # GXM (S912)
+        - const: amlogic,gx-vdec
+      - enum:
+        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: vdec
+      - const: esparser
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: dos
+      - const: esparser
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: esparser
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+
+  clock-names:
+    minItems: 4
+    maxItems: 5
+    items:
+      - const: dos_parser
+      - const: dos
+      - const: vdec_1
+      - const: vdec_hevc
+      - const: vdec_hevcf
+
+  amlogic,ao-sysctrl:
+    description: should point to the AOBUS sysctrl node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,gx-vdec
+
+    then:
+      properties:
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-vdec
+              - amlogic,sm1-vdec
+
+    then:
+      properties:
+        clock-names:
+          minItems: 5
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - amlogic,ao-sysctrl
+  - amlogic,canvas
+
+examples:
+  - |
+    vdec: video-decoder@c8820000 {
+          compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+          reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>;
+          reg-names = "dos", "esparser";
+          interrupts = <44>, <32>;
+          interrupt-names = "vdec", "esparser";
+          clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>;
+          clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+          resets = <&reset_parser>;
+          reset-names = "esparser";
+          amlogic,ao-sysctrl = <&sysctrl_AO>;
+          amlogic,canvas = <&canvas>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt
deleted file mode 100644
index 9b6aace86ca7..000000000000
--- a/Documentation/devicetree/bindings/media/amlogic,vdec.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Amlogic Video Decoder
-================================
-
-The video decoding IP lies within the DOS memory region,
-except for the hardware bitstream parser that makes use of an undocumented
-region.
-
-It makes use of the following blocks:
-
-- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
-then feed from this VIFIFO.
-- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
-- VDEC_HEVC can decode HEVC and VP9.
-
-Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
-concurrently.
-
-Device Tree Bindings:
----------------------
-
-VDEC: Video Decoder
---------------------------
-
-Required properties:
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,gxbb-vdec"
-	- GXL (S905X, S905D) : "amlogic,gxl-vdec"
-	- GXM (S912) : "amlogic,gxm-vdec"
-	followed by the common "amlogic,gx-vdec"
-- reg: base address and size of he following memory-mapped regions :
-	- dos
-	- esparser
-- reg-names: should contain the names of the previous memory regions
-- interrupts: should contain the following IRQs:
-	- vdec
-	- esparser
-- interrupt-names: should contain the names of the previous interrupts
-- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
-- amlogic,canvas: should point to a canvas provider node
-- clocks: should contain the following clocks :
-	- dos_parser
-	- dos
-	- vdec_1
-	- vdec_hevc
-- clock-names: should contain the names of the previous clocks
-- resets: should contain the parser reset
-- reset-names: should be "esparser"
-
-Example:
-
-vdec: video-codec@c8820000 {
-	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
-	reg = <0x0 0xc8820000 0x0 0x10000>,
-	      <0x0 0xc110a580 0x0 0xe4>;
-	reg-names = "dos", "esparser";
-
-	interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
-		     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "vdec", "esparser";
-
-	amlogic,ao-sysctrl = <&sysctrl_AO>;
-	amlogic,canvas = <&canvas>;
-
-	clocks = <&clkc CLKID_DOS_PARSER>,
-		 <&clkc CLKID_DOS>,
-		 <&clkc CLKID_VDEC_1>,
-		 <&clkc CLKID_VDEC_HEVC>;
-	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
-
-	resets = <&reset RESET_PARSER>;
-	reset-names = "esparser";
-};
diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
index 13ebc0fac9ea..ca4cf774662e 100644
--- a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
+++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
@@ -1,7 +1,8 @@
 Device-Tree bindings for hix5hd2 ir IP
 
 Required properties:
-	- compatible: Should contain "hisilicon,hix5hd2-ir".
+	- compatible: Should contain "hisilicon,hix5hd2-ir", or:
+		- "hisilicon,hi3796cv300-ir" for Hi3796CV300 IR device.
 	- reg: Base physical address of the controller and length of memory
 	  mapped region.
 	- interrupts: interrupt-specifier for the sole interrupt generated by
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
index e30b0d4eefdd..5eefd62ac5c5 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.txt
+++ b/Documentation/devicetree/bindings/media/renesas,vin.txt
@@ -13,6 +13,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
    - "renesas,vin-r8a7743" for the R8A7743 device
    - "renesas,vin-r8a7744" for the R8A7744 device
    - "renesas,vin-r8a7745" for the R8A7745 device
+   - "renesas,vin-r8a77470" for the R8A77470 device
    - "renesas,vin-r8a774a1" for the R8A774A1 device
    - "renesas,vin-r8a774b1" for the R8A774B1 device
    - "renesas,vin-r8a774c0" for the R8A774C0 device
@@ -41,9 +42,6 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
  - interrupts: the interrupt for the device
  - clocks: Reference to the parent clock
 
-Additionally, an alias named vinX will need to be created to specify
-which video input device this is.
-
 The per-board settings for Gen2 and RZ/G1 platforms:
 
 - port - sub-node describing a single endpoint connected to the VIN
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
new file mode 100644
index 000000000000..1ea784179536
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,cal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+
+maintainers:
+  - Benoit Parrot <bparrot@ti.com>
+
+description: |-
+  The Camera Adaptation Layer (CAL) is a key component for image capture
+  applications. The capture module provides the system interface and the
+  processing capability to connect CSI2 image-sensor modules to the
+  DRA72x device.
+
+  CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+  should contain a 'port' child node with child 'endpoint' node. Please
+  refer to the bindings defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+properties:
+  compatible:
+    enum:
+      # for DRA72 controllers
+      - ti,dra72-cal
+      # for DRA72 controllers pre ES2.0
+      - ti,dra72-pre-es2-cal
+      # for DRA76 controllers
+      - ti,dra76-cal
+      # for AM654 controllers
+      - ti,am654-cal
+
+  reg:
+    minItems: 2
+    items:
+      - description: The CAL main register region
+      - description: The RX Core0 (DPHY0) register region
+      - description: The RX Core1 (DPHY1) register region
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: cal_top
+      - const: cal_rx_core0
+      - const: cal_rx_core1
+
+  interrupts:
+    maxItems: 1
+
+  ti,camerrx-control:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description:
+      phandle to the device control module and offset to the
+      control_camerarx_core register
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    maxItems: 1
+
+  # See ./video-interfaces.txt for details
+  ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        additionalProperties: false
+
+        properties:
+          reg:
+            const: 0
+            description: CSI2 Port #0
+
+        patternProperties:
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              remote-endpoint: true
+
+        required:
+          - reg
+
+      port@1:
+        type: object
+        additionalProperties: false
+
+        properties:
+          reg:
+            const: 1
+            description: CSI2 Port #1
+
+        patternProperties:
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              remote-endpoint: true
+
+        required:
+          - reg
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ti,camerrx-control
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cal: cal@4845b000 {
+        compatible = "ti,dra72-cal";
+        reg = <0x4845B000 0x400>,
+              <0x4845B800 0x40>,
+              <0x4845B900 0x40>;
+        reg-names = "cal_top",
+                    "cal_rx_core0",
+                    "cal_rx_core1";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        ti,camerrx-control = <&scm_conf 0xE94>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              csi2_0: port@0 {
+                    reg = <0>;
+                    csi2_phy0: endpoint {
+                           remote-endpoint = <&csi2_cam0>;
+                           clock-lanes = <0>;
+                           data-lanes = <1 2>;
+                    };
+              };
+        };
+    };
+
+    i2c5: i2c@4807c000 {
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@3c {
+               compatible = "ovti,ov5640";
+               reg = <0x3c>;
+
+               clocks = <&clk_ov5640_fixed>;
+               clock-names = "xclk";
+
+               port {
+                    csi2_cam0: endpoint {
+                            remote-endpoint = <&csi2_phy0>;
+                            clock-lanes = <0>;
+                            data-lanes = <1 2>;
+                    };
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
deleted file mode 100644
index ae9b52f37576..000000000000
--- a/Documentation/devicetree/bindings/media/ti-cal.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
-------------------------------------------------------
-
-The Camera Adaptation Layer (CAL) is a key component for image capture
-applications. The capture module provides the system interface and the
-processing capability to connect CSI2 image-sensor modules to the
-DRA72x device.
-
-Required properties:
-- compatible: must be "ti,dra72-cal"
-- reg:	CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
-	control address space
-- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
-	     registers
-- interrupts: should contain IRQ line for the CAL;
-
-CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
-should contain a 'port' child node with child 'endpoint' node. Please
-refer to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	cal: cal@4845b000 {
-		compatible = "ti,dra72-cal";
-		ti,hwmods = "cal";
-		reg = <0x4845B000 0x400>,
-		      <0x4845B800 0x40>,
-		      <0x4845B900 0x40>,
-		      <0x4A002e94 0x4>;
-		reg-names = "cal_top",
-			    "cal_rx_core0",
-			    "cal_rx_core1",
-			    "camerrx_control";
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			csi2_0: port@0 {
-				reg = <0>;
-				endpoint {
-					slave-mode;
-					remote-endpoint = <&ar0330_1>;
-				};
-			};
-			csi2_1: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	i2c5: i2c@4807c000 {
-		ar0330@10 {
-			compatible = "ti,ar0330";
-			reg = <0x10>;
-
-			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ar0330_1: endpoint {
-					reg = <0>;
-					clock-lanes = <1>;
-					data-lanes = <0 2 3 4>;
-					remote-endpoint = <&csi2_0>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst
index fbc5517c8d5a..b362109bb131 100644
--- a/Documentation/media/kapi/dtv-frontend.rst
+++ b/Documentation/media/kapi/dtv-frontend.rst
@@ -15,8 +15,8 @@ The header file for this API is named ``dvb_frontend.h`` and located in
 Demodulator driver
 ^^^^^^^^^^^^^^^^^^
 
-The demodulator driver is responsible to talk with the decoding part of the
-hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
+The demodulator driver is responsible for talking with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, which
 tells what type of digital TV standards are supported, and points to a
 series of functions that allow the DVB core to command the hardware via
 the code under ``include/media/dvb_frontend.c``.
@@ -120,7 +120,7 @@ Satellite TV reception is::
 
 .. |delta|   unicode:: U+00394
 
-The ``include/media/dvb_frontend.c`` has a kernel thread with is
+The ``include/media/dvb_frontend.c`` has a kernel thread which is
 responsible for tuning the device. It supports multiple algorithms to
 detect a channel, as defined at enum :c:func:`dvbfe_algo`.
 
@@ -220,11 +220,11 @@ Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
   - As the gain is visible through the set of registers that adjust the gain,
     typically, this statistics is always available [#f3]_.
 
-  - Drivers should try to make it available all the times, as this statistics
+  - Drivers should try to make it available all the times, as these statistics
     can be used when adjusting an antenna position and to check for troubles
     at the cabling.
 
-  .. [#f3] On a few devices, the gain keeps floating if no carrier.
+  .. [#f3] On a few devices, the gain keeps floating if there is no carrier.
      On such devices, strength report should check first if carrier is
      detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
      and otherwise return the lowest possible value.
@@ -232,7 +232,7 @@ Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
 Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
   - Signal to Noise ratio for the main carrier.
 
-  - Signal to Noise measurement depends on the device. On some hardware, is
+  - Signal to Noise measurement depends on the device. On some hardware, it is
     available when the main carrier is detected. On those hardware, CNR
     measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
     see :c:type:`fe_status`).
@@ -323,8 +323,8 @@ A typical example of the logic that handle status and statistics is::
 		.read_status = foo_get_status_and_stats,
 	};
 
-Statistics collect
-^^^^^^^^^^^^^^^^^^
+Statistics collection
+^^^^^^^^^^^^^^^^^^^^^
 
 On almost all frontend hardware, the bit and byte counts are stored by
 the hardware after a certain amount of time or after the total bit/block
diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
index d0902f356d65..2535b77e3459 100644
--- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
@@ -177,7 +177,7 @@ Available follower modes are:
       - ``CEC_MODE_MONITOR``
       - 0xe0
       - Put the file descriptor into monitor mode. Can only be used in
-	combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,i
+	combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`,
 	otherwise the ``EINVAL`` error code will be returned.
 	In monitor mode all messages this CEC
 	device transmits and all messages it receives (both broadcast
diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst
index def6c40db601..7f03fbe3d3b0 100644
--- a/Documentation/media/uapi/dvb/video-get-event.rst
+++ b/Documentation/media/uapi/dvb/video-get-event.rst
@@ -81,7 +81,7 @@ for this ioctl call.
 	#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
 	#define VIDEO_EVENT_DECODER_STOPPED 	3
 	#define VIDEO_EVENT_VSYNC 		4
-		__kernel_time_t timestamp;
+		long timestamp;
 		union {
 			video_size_t size;
 			unsigned int frame_rate;	/* in frames per 1000sec */
diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst
index 479942ce6fb8..2697400ccf62 100644
--- a/Documentation/media/uapi/dvb/video_types.rst
+++ b/Documentation/media/uapi/dvb/video_types.rst
@@ -170,7 +170,7 @@ VIDEO_GET_EVENT call.
     #define VIDEO_EVENT_FRAME_RATE_CHANGED  2
     #define VIDEO_EVENT_DECODER_STOPPED     3
     #define VIDEO_EVENT_VSYNC       4
-	__kernel_time_t timestamp;
+	long timestamp;
 	union {
 	    video_size_t size;
 	    unsigned int frame_rate;    /* in frames per 1000sec */
diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
index b2cd155e691b..7d98a7bf9f1f 100644
--- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
@@ -55,8 +55,7 @@ please make a proposal on the linux-media mailing list.
 
       - ``V4L2_PIX_FMT_HM12``
       - 'HM12'
-      - YUV 4:2:0 format used by the IVTV driver,
-	`http://www.ivtvdriver.org/ <http://www.ivtvdriver.org/>`__
+      - YUV 4:2:0 format used by the IVTV driver.
 
 	The format is documented in the kernel sources in the file
 	``Documentation/media/v4l-drivers/cx2341x.rst``
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst
index 960851275f23..045540bc0d86 100644
--- a/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-srggb12p.rst
@@ -13,7 +13,7 @@
 .. _v4l2-pix-fmt-sgrbg12p:
 
 *******************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB12P ('pRAA'), V4L2_PIX_FMT_SGRBG12P ('pgAA'), V4L2_PIX_FMT_SGBRG12P ('pGAA'), V4L2_PIX_FMT_SBGGR12P ('pBAA'),
+V4L2_PIX_FMT_SRGGB12P ('pRCC'), V4L2_PIX_FMT_SGRBG12P ('pgCC'), V4L2_PIX_FMT_SGBRG12P ('pGCC'), V4L2_PIX_FMT_SBGGR12P ('pBCC'),
 *******************************************************************************************************************************
 
 
diff --git a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst
index 1a988d7e7ff8..051ae3d05bc3 100644
--- a/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-srggb14p.rst
@@ -13,7 +13,7 @@
 .. _v4l2-pix-fmt-sgrbg14p:
 
 *******************************************************************************************************************************
-V4L2_PIX_FMT_SRGGB14P ('pRCC'), V4L2_PIX_FMT_SGRBG14P ('pgCC'), V4L2_PIX_FMT_SGBRG14P ('pGCC'), V4L2_PIX_FMT_SBGGR14P ('pBCC'),
+V4L2_PIX_FMT_SRGGB14P ('pREE'), V4L2_PIX_FMT_SGRBG14P ('pgEE'), V4L2_PIX_FMT_SGBRG14P ('pGEE'), V4L2_PIX_FMT_SBGGR14P ('pBEE'),
 *******************************************************************************************************************************
 
 *man V4L2_PIX_FMT_SRGGB14P(2)*
diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst
index 4031b175257c..6f1be873bec1 100644
--- a/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-tch-td16.rst
@@ -15,7 +15,7 @@ V4L2_TCH_FMT_DELTA_TD16 ('TD16')
 
 *man V4L2_TCH_FMT_DELTA_TD16(2)*
 
-16-bit signed Touch Delta
+16-bit signed little endian Touch Delta
 
 
 Description
@@ -37,38 +37,38 @@ Each cell is one byte.
     :widths:       2 1 1 1 1 1 1 1 1
 
     * - start + 0:
-      - D'\ :sub:`00high`
       - D'\ :sub:`00low`
-      - D'\ :sub:`01high`
+      - D'\ :sub:`00high`
       - D'\ :sub:`01low`
-      - D'\ :sub:`02high`
+      - D'\ :sub:`01high`
       - D'\ :sub:`02low`
-      - D'\ :sub:`03high`
+      - D'\ :sub:`02high`
       - D'\ :sub:`03low`
+      - D'\ :sub:`03high`
     * - start + 8:
-      - D'\ :sub:`10high`
       - D'\ :sub:`10low`
-      - D'\ :sub:`11high`
+      - D'\ :sub:`10high`
       - D'\ :sub:`11low`
-      - D'\ :sub:`12high`
+      - D'\ :sub:`11high`
       - D'\ :sub:`12low`
-      - D'\ :sub:`13high`
+      - D'\ :sub:`12high`
       - D'\ :sub:`13low`
+      - D'\ :sub:`13high`
     * - start + 16:
-      - D'\ :sub:`20high`
       - D'\ :sub:`20low`
-      - D'\ :sub:`21high`
+      - D'\ :sub:`20high`
       - D'\ :sub:`21low`
-      - D'\ :sub:`22high`
+      - D'\ :sub:`21high`
       - D'\ :sub:`22low`
-      - D'\ :sub:`23high`
+      - D'\ :sub:`22high`
       - D'\ :sub:`23low`
+      - D'\ :sub:`23high`
     * - start + 24:
-      - D'\ :sub:`30high`
       - D'\ :sub:`30low`
-      - D'\ :sub:`31high`
+      - D'\ :sub:`30high`
       - D'\ :sub:`31low`
-      - D'\ :sub:`32high`
+      - D'\ :sub:`31high`
       - D'\ :sub:`32low`
-      - D'\ :sub:`33high`
+      - D'\ :sub:`32high`
       - D'\ :sub:`33low`
+      - D'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst
index 8278543be99a..cb3da6687a58 100644
--- a/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-tch-tu16.rst
@@ -15,7 +15,7 @@ V4L2_TCH_FMT_TU16 ('TU16')
 
 *man V4L2_TCH_FMT_TU16(2)*
 
-16-bit unsigned raw touch data
+16-bit unsigned little endian raw touch data
 
 
 Description
@@ -36,38 +36,38 @@ Each cell is one byte.
     :widths:       2 1 1 1 1 1 1 1 1
 
     * - start + 0:
-      - R'\ :sub:`00high`
       - R'\ :sub:`00low`
-      - R'\ :sub:`01high`
+      - R'\ :sub:`00high`
       - R'\ :sub:`01low`
-      - R'\ :sub:`02high`
+      - R'\ :sub:`01high`
       - R'\ :sub:`02low`
-      - R'\ :sub:`03high`
+      - R'\ :sub:`02high`
       - R'\ :sub:`03low`
+      - R'\ :sub:`03high`
     * - start + 8:
-      - R'\ :sub:`10high`
       - R'\ :sub:`10low`
-      - R'\ :sub:`11high`
+      - R'\ :sub:`10high`
       - R'\ :sub:`11low`
-      - R'\ :sub:`12high`
+      - R'\ :sub:`11high`
       - R'\ :sub:`12low`
-      - R'\ :sub:`13high`
+      - R'\ :sub:`12high`
       - R'\ :sub:`13low`
+      - R'\ :sub:`13high`
     * - start + 16:
-      - R'\ :sub:`20high`
       - R'\ :sub:`20low`
-      - R'\ :sub:`21high`
+      - R'\ :sub:`20high`
       - R'\ :sub:`21low`
-      - R'\ :sub:`22high`
+      - R'\ :sub:`21high`
       - R'\ :sub:`22low`
-      - R'\ :sub:`23high`
+      - R'\ :sub:`22high`
       - R'\ :sub:`23low`
+      - R'\ :sub:`23high`
     * - start + 24:
-      - R'\ :sub:`30high`
       - R'\ :sub:`30low`
-      - R'\ :sub:`31high`
+      - R'\ :sub:`30high`
       - R'\ :sub:`31low`
-      - R'\ :sub:`32high`
+      - R'\ :sub:`31high`
       - R'\ :sub:`32low`
-      - R'\ :sub:`33high`
+      - R'\ :sub:`32high`
       - R'\ :sub:`33low`
+      - R'\ :sub:`33high`
diff --git a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
index 399ef1062bac..8ca6ab701e4a 100644
--- a/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
+++ b/Documentation/media/uapi/v4l/vidioc-enum-fmt.rst
@@ -44,7 +44,9 @@ To enumerate image formats applications initialize the ``type`` and
 the :ref:`VIDIOC_ENUM_FMT` ioctl with a pointer to this structure. Drivers
 fill the rest of the structure or return an ``EINVAL`` error code. All
 formats are enumerable by beginning at index zero and incrementing by
-one until ``EINVAL`` is returned.
+one until ``EINVAL`` is returned. If applicable, drivers shall return
+formats in preference order, where preferred formats are returned before
+(that is, with lower ``index`` value) less-preferred formats.
 
 .. note::
 
diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
index 5712bd48e687..5c675cbac4cf 100644
--- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
+++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst
@@ -279,7 +279,7 @@ EBUSY
 	then it will set this flag to signal this to the application.
     * - ``V4L2_DV_FL_HALF_LINE``
       - Specific to interlaced formats: if set, then the vertical
-	backporch of field 1 (aka the odd field) is really one half-line
+	frontporch of field 1 (aka the odd field) is really one half-line
 	longer and the vertical backporch of field 2 (aka the even field)
 	is really one half-line shorter, so each field has exactly the
 	same number of half-lines. Whether half-lines can be detected or
diff --git a/Documentation/media/v4l-drivers/cx18.rst b/Documentation/media/v4l-drivers/cx18.rst
deleted file mode 100644
index 16895a734bae..000000000000
--- a/Documentation/media/v4l-drivers/cx18.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cx18 driver
-===============
-
-.. note::
-
-   This documentation is outdated.
-
-Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
-encoder chip:
-
-1) Currently supported are:
-
-	- Hauppauge HVR-1600
-	- Compro VideoMate H900
-	- Yuan MPC718
-	- Conexant Raptor PAL/SECAM devkit
-
-2) Some people have problems getting the i2c bus to work.
-   The symptom is that the eeprom cannot be read and the card is
-   unusable. This is probably fixed, but if you have problems
-   then post to the video4linux or ivtv-users mailing list.
-
-3) VBI (raw or sliced) has not yet been implemented.
-
-4) MPEG indexing is not yet implemented.
-
-5) The driver is still a bit rough around the edges, this should
-   improve over time.
-
-
-Firmware:
-
-You can obtain the firmware files here:
-
-http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz
-
-Untar and copy the .fw files to your firmware directory.
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
index c4c78a28654c..b41fea23fe5d 100644
--- a/Documentation/media/v4l-drivers/index.rst
+++ b/Documentation/media/v4l-drivers/index.rst
@@ -38,7 +38,6 @@ For more details see the file COPYING in the source distribution of Linux.
 	bttv
 	cafe_ccic
 	cpia2
-	cx18
 	cx2341x
 	cx88
 	davinci-vpbe