Merge tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek into next/dt

- mt7623: add mt7623n and mt7623a plattform
- add mt7623 based reference boards
- mt7623: add usb3, ethernet, cpufreq,
- Add banana-pi board
- add mt6323 pmic
- mt2701: add larb-id property to smi larb

* tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek:
  arm: dts: mt7623: cleanup binding file
  arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2
  arm: dts: mediatek: add larbid property for larb
  arm: dts: mt7623: fix mmc interrupt assignment
  arm: dts: mt2701: Add usb3 device nodes
  arm: dts: mt2701: Add ethernet device node
  arm: dts: mt7623: add clock-frequency to CPU nodes
  arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
  arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
  arm: dts: mt7623: enable the usb device on the mt7623n rfb
  arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
  arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
  arm: dts: mt7623: add mt6323.dtsi file
  dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform
  dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
  arm: dts: mt7623: fixup binding violation missing reset in ethernet node
  dt-bindings: net: mediatek: update documentation for reset signals

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 12 insertions, 8 deletions

diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index da7bd138e6f2..1caa9d2e83e1 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,7 +1,6 @@
-MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
+MediaTek SoC based Platforms Device Tree Bindings
 
-Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
-following property:
+Boards with a MediaTek SoC shall have the following property:
 
 Required root node property:
 
@@ -14,7 +13,8 @@ compatible: Must contain one of
    "mediatek,mt6795"
    "mediatek,mt6797"
    "mediatek,mt7622"
-   "mediatek,mt7623"
+   "mediatek,mt7623" which is referred to MT7623N SoC
+   "mediatek,mt7623a"
    "mediatek,mt8127"
    "mediatek,mt8135"
    "mediatek,mt8173"
@@ -46,9 +46,11 @@ Supported boards:
 - Reference board variant 1 for MT7622:
     Required root node properties:
       - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Evaluation board for MT7623:
+- Reference  board for MT7623n with NAND:
     Required root node properties:
-      - compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
+- Bananapi BPI-R2 board:
+      - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
 - MTK mt8127 tablet moose EVB:
     Required root node properties:
       - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index c7194e87d5f4..97ffae78df8f 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -15,8 +15,10 @@ Required properties:
 - clock-names: the names of the clock listed in the clocks property. These are
 	"ethif", "esw", "gp2", "gp1"
 - power-domains: phandle to the power domain that the ethernet is part of
-- resets: Should contain a phandle to the ethsys reset signal
-- reset-names: Should contain the reset signal name "eth"
+- resets: Should contain phandles to the ethsys reset signals
+- reset-names: Should contain the names of reset signal listed in the resets
+		property
+		These are "fe", "gmac" and "ppe"
 - mediatek,ethsys: phandle to the syscon node that handles the port setup
 - mediatek,pctl: phandle to the syscon node that handles the ports slew rate
 	and driver current