ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 593 deletions

diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
deleted file mode 100644
index ec1507c5147c..000000000000
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ /dev/null
@@ -1,593 +0,0 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "arm,realview-pbx";
-
-	chosen { };
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-	};
-
-	memory {
-		device_type = "memory";
-		/* 128 MiB memory @ 0x0 */
-		reg = <0x00000000 0x08000000>;
-	};
-
-	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: regulator-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-        };
-
-	veth: regulator-veth {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	refclk32khz: refclk32khz {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timclk: timclk@1M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <24>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	flash0@40000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x40000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	flash1@44000000 {
-		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,versatile-flash", "cfi-flash";
-		reg = <0x44000000 0x04000000>;
-		bank-width = <4>;
-		partitions {
-			compatible = "arm,arm-firmware-suite";
-		};
-	};
-
-	/* SMSC 9118 ethernet with PHY and EEPROM */
-	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
-		reg = <0x4e000000 0x10000>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
-	};
-
-	usb: usb@4f000000 {
-		compatible = "nxp,usb-isp1761";
-		reg = <0x4f000000 0x20000>;
-		dr_mode = "peripheral";
-	};
-
-	bridge {
-		compatible = "ti,ths8134a", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&clcd_pads>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		/*
-		 * This DDC I2C is connected directly to the DVI portions
-		 * of the connector, so it's not really working when the
-		 * monitor is connected to the VGA connector.
-		 */
-		compatible = "vga-connector";
-		ddc-i2c-bus = <&i2c1>;
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-
-	soc: soc {
-		compatible = "arm,realview-pbx-soc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		regmap = <&syscon>;
-		ranges;
-
-		syscon: syscon@10000000 {
-			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
-			reg = <0x10000000 0x1000>;
-			ranges = <0x0 0x10000000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			led@8,0 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x01>;
-				label = "versatile:0";
-				linux,default-trigger = "heartbeat";
-				default-state = "on";
-			};
-			led@8,1 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x02>;
-				label = "versatile:1";
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-			led@8,2 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x04>;
-				label = "versatile:2";
-				linux,default-trigger = "cpu0";
-				default-state = "off";
-			};
-			led@8,3 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x08>;
-				label = "versatile:3";
-				default-state = "off";
-			};
-			led@8,4 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x10>;
-				label = "versatile:4";
-				default-state = "off";
-			};
-			led@8,5 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x20>;
-				label = "versatile:5";
-				default-state = "off";
-			};
-			led@8,6 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x40>;
-				label = "versatile:6";
-				default-state = "off";
-			};
-			led@8,7 {
-				compatible = "register-bit-led";
-				reg = <0x08 0x04>;
-				offset = <0x08>;
-				mask = <0x80>;
-				label = "versatile:7";
-				default-state = "off";
-			};
-			oscclk0: clock-controller@c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x0c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x0C>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk1: clock-controller@10 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x10 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x10>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk2: clock-controller@14 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x14 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x14>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk3: clock-controller@18 {
-				compatible = "arm,syscon-icst307";
-				reg = <0x18 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x18>;
-				clocks = <&xtal24mhz>;
-			};
-			oscclk4: clock-controller@1c {
-				compatible = "arm,syscon-icst307";
-				reg = <0x1c 0x04>;
-				#clock-cells = <0>;
-				lock-offset = <0x20>;
-				vco-offset = <0x1c>;
-				clocks = <&xtal24mhz>;
-			};
-		};
-
-		sp810_syscon0: sysctl@10001000 {
-			compatible = "arm,sp810", "arm,primecell";
-			reg = <0x10001000 0x1000>;
-			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
-			clock-names = "refclk", "timclk", "apb_pclk";
-			#clock-cells = <1>;
-			clock-output-names = "timerclk0",
-					     "timerclk1",
-					     "timerclk2",
-					     "timerclk3";
-			assigned-clocks = <&sp810_syscon0 0>,
-					  <&sp810_syscon0 1>,
-					  <&sp810_syscon0 2>,
-					  <&sp810_syscon0 3>;
-			assigned-clock-parents = <&timclk>,
-					       <&timclk>,
-					       <&timclk>,
-					       <&timclk>;
-		};
-
-		i2c0: i2c@10002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10002000 0x1000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1338";
-				reg = <0x68>;
-			};
-		};
-
-		serial0: serial@10009000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x10009000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial1: serial@1000a000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000a000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		serial2: serial@1000b000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000b000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		ssp: spi@1000d000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x1000d000 0x1000>;
-			clocks = <&sspclk>, <&pclk>;
-			clock-names = "sspclk", "apb_pclk";
-		};
-
-		wdog0: watchdog@1000f000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x1000f000 0x1000>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		wdog1: watchdog@10010000 {
-			compatible = "arm,sp805", "arm,primecell";
-			reg = <0x10010000 0x1000>;
-			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdog_clk", "apb_pclk";
-			status = "disabled";
-		};
-
-		timer01: timer@10011000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10011000 0x1000>;
-			clocks = <&sp810_syscon0 0>,
-			         <&sp810_syscon0 1>,
-				 <&pclk>;
-			clock-names = "timerclk0",
-				    "timerclk1",
-				    "apb_pclk";
-		};
-
-		timer23: timer@10012000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10012000 0x1000>;
-			clocks = <&sp810_syscon0 2>,
-			         <&sp810_syscon0 3>,
-				 <&pclk>;
-			clock-names = "timerclk2",
-				    "timerclk3",
-				    "apb_pclk";
-		};
-
-		gpio0: gpio@10013000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10013000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@10014000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10014000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@10015000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x10015000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		i2c1: i2c@10016000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "arm,versatile-i2c";
-			reg = <0x10016000 0x1000>;
-		};
-
-		rtc: rtc@10017000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x10017000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		timer45: timer@10018000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10018000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timerclk4", "timerclk5", "apb_pclk";
-		};
-
-		timer67: timer@10019000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x10019000 0x1000>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timerclk6", "timerclk7", "apb_pclk";
-		};
-
-		sp810_syscon1: sysctl@1001a000 {
-			compatible = "arm,sp810", "arm,primecell";
-			reg = <0x1001a000 0x1000>;
-			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
-			clock-names = "refclk", "timclk", "apb_pclk";
-			#clock-cells = <1>;
-			clock-output-names = "timerclk4",
-					     "timerclk5",
-					     "timerclk6",
-					     "timerclk7";
-			assigned-clocks = <&sp810_syscon1 0>,
-					  <&sp810_syscon1 1>,
-					  <&sp810_syscon1 2>,
-					  <&sp810_syscon1 3>;
-			assigned-clock-parents = <&timclk>,
-					       <&timclk>,
-					       <&timclk>,
-					       <&timclk>;
-		};
-	};
-
-
-	/* These peripherals are inside the FPGA */
-	fpga {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		aaci: aaci@10004000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x10004000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		mmc: mmcsd@10005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x10005000 0x1000>;
-
-			/* Due to frequent FIFO overruns, use just 500 kHz */
-			max-frequency = <500000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			clocks = <&mclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-			vmmc-supply = <&vmmc>;
-			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		kmi0: kmi@10006000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10006000 0x1000>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@10007000 {
-			compatible = "arm,pl050", "arm,primecell";
-			reg = <0x10007000 0x1000>;
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		serial3: serial@1000c000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x1000c000 0x1000>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-	};
-
-	/* These peripherals are inside the NEC ISSP */
-	issp {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		clcd: clcd@10020000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0x10020000 0x1000>;
-			interrupt-names = "combined";
-			clocks = <&oscclk4>, <&pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-			/* 1024x768 16bpp @65MHz works fine */
-			max-memory-bandwidth = <95000000>;
-
-			port {
-				clcd_pads: endpoint {
-					remote-endpoint = <&vga_bridge_in>;
-					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-				};
-			};
-		};
-	};
-};