ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 176 deletions

diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
deleted file mode 100644
index 4ab45f294de2..000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Linksys WRT3200ACM (Rango)
- *
- * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT3200ACM";
-	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "rango:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "rango:white:wan";
-		reg = <0x1>;
-	};
-
-	usb2@5 {
-		label = "rango:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "rango:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "rango:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "rango:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "rango:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	led-power {
-		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		label = "rango:white:power";
-	};
-
-	led-sata {
-		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		label = "rango:white:sata";
-	};
-
-	led-wlan_2g {
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		label = "rango:white:wlan_2g";
-	};
-
-	led-wlan_5g {
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		label = "rango:white:wlan_5g";
-	};
-};
-
-&gpio_leds_pins {
-	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
-	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x200000>;  /* 2MiB */
-			read-only;
-		};
-
-		partition@200000 {
-			label = "u_env";
-			reg = <0x200000 0x20000>;    /* 128KiB */
-		};
-
-		partition@220000 {
-			label = "s_env";
-			reg = <0x220000 0x40000>;    /* 256KiB */
-		};
-
-		partition@7e0000 {
-			label = "devinfo";
-			reg = <0x7e0000 0x40000>;   /* 256KiB */
-			read-only;
-		};
-
-		partition@820000 {
-			label = "sysdiag";
-			reg = <0x820000 0x1e0000>;   /* 1920KiB */
-			read-only;
-		};
-
-		/* kernel1 overlaps with rootfs1 by design */
-		partition@a00000 {
-			label = "kernel1";
-			reg = <0xa00000 0x5000000>;  /* 80MiB */
-		};
-
-		partition@1000000 {
-			label = "rootfs1";
-			reg = <0x1000000 0x4a00000>;  /* 74MiB */
-		};
-
-		/* kernel2 overlaps with rootfs2 by design */
-		partition@5a00000 {
-			label = "kernel2";
-			reg = <0x5a00000 0x5000000>; /* 80MiB */
-		};
-
-		partition@6000000 {
-			label = "rootfs2";
-			reg = <0x6000000 0x4a00000>; /* 74MiB */
-		};
-
-		/*
-		 * 86MiB, last MiB is for the BBT, not writable
-		 */
-		partition@aa00000 {
-			label = "syscfg";
-			reg = <0xaa00000 0x5600000>;
-		};
-
-		/*
-		 * Unused area between "s_env" and "devinfo".
-		 * Moved here because otherwise the renumbered
-		 * partitions would break the bootloader
-		 * supplied bootargs
-		 */
-		partition@180000 {
-			label = "unused_area";
-			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
-		};
-	};
-};
-
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhci_pins>;
-	no-1-8-v;
-	non-removable;
-	wp-inverted;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&usb3_1_vbus {
-	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
-	marvell,pins = "mpp44";
-};