ARM: dts: armada-385-linksys: partition layout is board specific

Move the partition layout to individual boards. The Linksys WRT 3200 ACM
(Rango) comes with a 256MiB nand flash chip and different layout.

Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

1 files changed, 1 insertions, 63 deletions

diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 4049eaf80638..485abffb4368 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -172,74 +172,12 @@
 };
 
 &nand {
+	/* 128MiB or 256MiB */
 	status = "okay";
 	num-cs = <1>;
 	marvell,nand-keep-config;
 	marvell,nand-enable-arbiter;
 	nand-on-flash-bbt;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MiB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "u_env";
-		reg = <0x200000 0x40000>;    /* 256KiB */
-	};
-
-	partition@140000 {
-		label = "s_env";
-		reg = <0x240000 0x40000>;    /* 256KiB */
-	};
-
-	partition@900000 {
-		label = "devinfo";
-		reg = <0x900000 0x100000>;   /* 1MiB */
-		read-only;
-	};
-
-	/* kernel1 overlaps with rootfs1 by design */
-	partition@a00000 {
-		label = "kernel1";
-		reg = <0xa00000 0x2800000>;  /* 40MiB */
-	};
-
-	partition@1000000 {
-		label = "rootfs1";
-		reg = <0x1000000 0x2200000>;  /* 34MiB */
-	};
-
-	/* kernel2 overlaps with rootfs2 by design */
-	partition@3200000 {
-		label = "kernel2";
-		reg = <0x3200000 0x2800000>; /* 40MiB */
-	};
-
-	partition@3800000 {
-		label = "rootfs2";
-		reg = <0x3800000 0x2200000>; /* 34MiB */
-	};
-
-	/*
-	 * 38MiB, last MiB is for the BBT, not writable
-	 */
-	partition@5a00000 {
-		label = "syscfg";
-		reg = <0x5a00000 0x2600000>;
-	};
-
-	/*
-	 * Unused area between "s_env" and "devinfo".
-	 * Moved here because otherwise the renumbered
-	 * partitions would break the bootloader
-	 * supplied bootargs
-	 */
-	partition@180000 {
-		label = "unused_area";
-		reg = <0x280000 0x680000>;   /* 6.5MiB */
-	};
 };
 
 &mdio {