Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

1 files changed, 107 insertions, 100 deletions

diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 5d3ed5aafc69..4aad0d9f5462 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -10,7 +10,10 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91RM9200 family SoC";
@@ -77,25 +80,29 @@
 			st: timer@fffffd00 {
 				compatible = "atmel,at91rm9200-st";
 				reg = <0xfffffd00 0x100>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			tcb0: timer@fffa0000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 0 18 4 0 19 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@fffa4000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa4000 0x100>;
-				interrupts = <20 4 0 21 4 0 22 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
+					      21 IRQ_TYPE_LEVEL_HIGH 0
+					      22 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			i2c0: i2c@fffb8000 {
 				compatible = "atmel,at91rm9200-i2c";
 				reg = <0xfffb8000 0x4000>;
-				interrupts = <12 4 6>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_twi>;
 				#address-cells = <1>;
@@ -106,7 +113,7 @@
 			mmc0: mmc@fffb4000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffb4000 0x4000>;
-				interrupts = <10 4 0>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -115,7 +122,7 @@
 			ssc0: ssc@fffd0000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffd0000 0x4000>;
-				interrupts = <14 4 5>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disable";
@@ -124,7 +131,7 @@
 			ssc1: ssc@fffd4000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffd4000 0x4000>;
-				interrupts = <15 4 5>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disable";
@@ -133,7 +140,7 @@
 			ssc2: ssc@fffd8000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffd8000 0x4000>;
-				interrupts = <16 4 5>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
 				status = "disable";
@@ -142,7 +149,7 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at91rm9200-emac", "cdns,emac";
 				reg = <0xfffbc000 0x4000>;
-				interrupts = <24 4 3>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				phy-mode = "rmii";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
@@ -167,234 +174,234 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<0 30 0x1 0x0	/* PA30 periph A */
-							 0 31 0x1 0x1>;	/* PA31 periph with pullup */
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA31 periph with pullup */
 					};
 				};
 
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<0 17 0x1 0x0	/* PA17 periph A */
-							 0 18 0x1 0x0>;	/* PA18 periph A */
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA18 periph A */
 					};
 
 					pinctrl_uart0_rts: uart0_rts-0 {
 						atmel,pins =
-							<0 20 0x1 0x0>;	/* PA20 periph A */
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
 					};
 
 					pinctrl_uart0_cts: uart0_cts-0 {
 						atmel,pins =
-							<0 21 0x1 0x0>;	/* PA21 periph A */
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
 					};
 				};
 
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<1 20 0x1 0x1	/* PB20 periph A with pullup */
-							 1 21 0x1 0x0>;	/* PB21 periph A */
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB20 periph A with pullup */
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
 					};
 
 					pinctrl_uart1_rts: uart1_rts-0 {
 						atmel,pins =
-							<1 24 0x1 0x0>;	/* PB24 periph A */
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
 					};
 
 					pinctrl_uart1_cts: uart1_cts-0 {
 						atmel,pins =
-							<1 26 0x1 0x0>;	/* PB26 periph A */
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
 					};
 
 					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
 						atmel,pins =
-							<1 19 0x1 0x0	/* PB19 periph A */
-							 1 25 0x1 0x0>;	/* PB25 periph A */
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
 					};
 
 					pinctrl_uart1_dcd: uart1_dcd-0 {
 						atmel,pins =
-							<1 23 0x1 0x0>;	/* PB23 periph A */
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
 					};
 
 					pinctrl_uart1_ri: uart1_ri-0 {
 						atmel,pins =
-							<1 18 0x1 0x0>;	/* PB18 periph A */
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
 					};
 				};
 
 				uart2 {
 					pinctrl_uart2: uart2-0 {
 						atmel,pins =
-							<0 22 0x1 0x0	/* PA22 periph A */
-							 0 23 0x1 0x1>;	/* PA23 periph A with pullup */
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA22 periph A */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
 					};
 
 					pinctrl_uart2_rts: uart2_rts-0 {
 						atmel,pins =
-							<0 30 0x2 0x0>;	/* PA30 periph B */
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
 					};
 
 					pinctrl_uart2_cts: uart2_cts-0 {
 						atmel,pins =
-							<0 31 0x2 0x0>;	/* PA31 periph B */
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
 					};
 				};
 
 				uart3 {
 					pinctrl_uart3: uart3-0 {
 						atmel,pins =
-							<0 5 0x2 0x1	/* PA5 periph B with pullup */
-							 0 6 0x2 0x0>;	/* PA6 periph B */
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA6 periph B */
 					};
 
 					pinctrl_uart3_rts: uart3_rts-0 {
 						atmel,pins =
-							<1 0 0x2 0x0>;	/* PB0 periph B */
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
 					pinctrl_uart3_cts: uart3_cts-0 {
 						atmel,pins =
-							<1 1 0x2 0x0>;	/* PB1 periph B */
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
 				};
 
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<2 2 0x0 0x1	/* PC2 gpio RDY pin pull_up */
-							 1 1 0x0 0x1>;	/* PB1 gpio CD pin pull_up */
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
+							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
 					};
 				};
 
 				macb {
 					pinctrl_macb_rmii: macb_rmii-0 {
 						atmel,pins =
-							<0 7 0x1 0x0	/* PA7 periph A */
-							 0 8 0x1 0x0	/* PA8 periph A */
-							 0 9 0x1 0x0	/* PA9 periph A */
-							 0 10 0x1 0x0	/* PA10 periph A */
-							 0 11 0x1 0x0	/* PA11 periph A */
-							 0 12 0x1 0x0	/* PA12 periph A */
-							 0 13 0x1 0x0	/* PA13 periph A */
-							 0 14 0x1 0x0	/* PA14 periph A */
-							 0 15 0x1 0x0	/* PA15 periph A */
-							 0 16 0x1 0x0>;	/* PA16 periph A */
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
 					};
 
 					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
 						atmel,pins =
-							<1 12 0x2 0x0	/* PB12 periph B */
-							 1 13 0x2 0x0	/* PB13 periph B */
-							 1 14 0x2 0x0	/* PB14 periph B */
-							 1 15 0x2 0x0	/* PB15 periph B */
-							 1 16 0x2 0x0	/* PB16 periph B */
-							 1 17 0x2 0x0	/* PB17 periph B */
-							 1 18 0x2 0x0	/* PB18 periph B */
-							 1 19 0x2 0x0>;	/* PB19 periph B */
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
+							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
+							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
+							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
+							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
+							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
 					};
 				};
 
 				mmc0 {
 					pinctrl_mmc0_clk: mmc0_clk-0 {
 						atmel,pins =
-							<0 27 0x1 0x0>;	/* PA27 periph A */
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
 					};
 
 					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
 						atmel,pins =
-							<0 28 0x1 0x1	/* PA28 periph A with pullup */
-							 0 29 0x1 0x1>;	/* PA29 periph A with pullup */
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
 					};
 
 					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 						atmel,pins =
-							<1 3 0x2 0x1	/* PB3 periph B with pullup */
-							 1 4 0x2 0x1	/* PB4 periph B with pullup */
-							 1 5 0x2 0x1>;	/* PB5 periph B with pullup */
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
 					};
 
 					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
 						atmel,pins =
-							<0 8 0x2 0x1	/* PA8 periph B with pullup */
-							 0 9 0x2 0x1>;	/* PA9 periph B with pullup */
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
 					};
 
 					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
 						atmel,pins =
-							<0 10 0x2 0x1	/* PA10 periph B with pullup */
-							 0 11 0x2 0x1	/* PA11 periph B with pullup */
-							 0 12 0x2 0x1>;	/* PA12 periph B with pullup */
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
 					};
 				};
 
 				ssc0 {
 					pinctrl_ssc0_tx: ssc0_tx-0 {
 						atmel,pins =
-							<1 0 0x1 0x0	/* PB0 periph A */
-							 1 1 0x1 0x0	/* PB1 periph A */
-							 1 2 0x1 0x0>;	/* PB2 periph A */
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
 					};
 
 					pinctrl_ssc0_rx: ssc0_rx-0 {
 						atmel,pins =
-							<1 3 0x1 0x0	/* PB3 periph A */
-							 1 4 0x1 0x0	/* PB4 periph A */
-							 1 5 0x1 0x0>;	/* PB5 periph A */
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
 					};
 				};
 
 				ssc1 {
 					pinctrl_ssc1_tx: ssc1_tx-0 {
 						atmel,pins =
-							<1 6 0x1 0x0	/* PB6 periph A */
-							 1 7 0x1 0x0	/* PB7 periph A */
-							 1 8 0x1 0x0>;	/* PB8 periph A */
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
 					};
 
 					pinctrl_ssc1_rx: ssc1_rx-0 {
 						atmel,pins =
-							<1 9 0x1 0x0	/* PB9 periph A */
-							 1 10 0x1 0x0	/* PB10 periph A */
-							 1 11 0x1 0x0>;	/* PB11 periph A */
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
 					};
 				};
 
 				ssc2 {
 					pinctrl_ssc2_tx: ssc2_tx-0 {
 						atmel,pins =
-							<1 12 0x1 0x0	/* PB12 periph A */
-							 1 13 0x1 0x0	/* PB13 periph A */
-							 1 14 0x1 0x0>;	/* PB14 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
 					};
 
 					pinctrl_ssc2_rx: ssc2_rx-0 {
 						atmel,pins =
-							<1 15 0x1 0x0	/* PB15 periph A */
-							 1 16 0x1 0x0	/* PB16 periph A */
-							 1 17 0x1 0x0>;	/* PB17 periph A */
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
 					};
 				};
 
 				twi {
 					pinctrl_twi: twi-0 {
 						atmel,pins =
-							<0 25 0x1 0x2	/* PA25 periph A with multi drive */
-							 0 26 0x1 0x2>;	/* PA26 periph A with multi drive */
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
 					};
 
 					pinctrl_twi_gpio: twi_gpio-0 {
 						atmel,pins =
-							<0 25 0x0 0x2	/* PA25 GPIO with multi drive */
-							 0 26 0x0 0x2>;	/* PA26 GPIO with multi drive */
+							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
 					};
 				};
 
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -404,7 +411,7 @@
 				pioB: gpio@fffff600 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -414,7 +421,7 @@
 				pioC: gpio@fffff800 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -424,7 +431,7 @@
 				pioD: gpio@fffffa00 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <5 4 1>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -435,7 +442,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -444,7 +451,7 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
-				interrupts = <6 4 5>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -455,7 +462,7 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -466,7 +473,7 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -477,7 +484,7 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
-				interrupts = <23 4 5>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -488,7 +495,7 @@
 			usb1: gadget@fffb0000 {
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
-				interrupts = <11 4 2>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
 				status = "disabled";
 			};
 		};
@@ -503,9 +510,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			nand-ecc-mode = "soft";
-			gpios = <&pioC 2 0
+			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
 				 0
-				 &pioB 1 0
+				 &pioB 1 GPIO_ACTIVE_HIGH
 				>;
 			status = "disabled";
 		};
@@ -513,15 +520,15 @@
 		usb0: ohci@00300000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
-			interrupts = <23 4 2>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 25 0 /* sda */
-			 &pioA 26 0 /* scl */
+		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;