diff options
| author | Stefan Wahren <wahrenst@gmx.net> | 2019-07-14 17:55:00 +0200 |
|---|---|---|
| committer | Stefan Wahren <wahrenst@gmx.net> | 2019-08-12 22:53:13 +0200 |
| commit | e7774049ff255c8ba72bcee9c7ab307a95e8d7bc (patch) | |
| tree | d4a7d97d9c34a4d688d53f72b8b6a03ef07e6953 /arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | |
| parent | ARM: bcm283x: Reduce register ranges for UART, SPI and I2C (diff) | |
| download | linux-e7774049ff255c8ba72bcee9c7ab307a95e8d7bc.tar.xz linux-e7774049ff255c8ba72bcee9c7ab307a95e8d7bc.zip | |
ARM: dts: bcm283x: Define MMC interfaces at board level
Starting with RPi 4 this is the first board, which doesn't use sdhost
as default SD interface. So the MMC interfaces should be defined finally at
board level. Since all boards using sdhci already does this, we can drop the
pinctrl part from bcm2835-rpi.dtsi.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>
Diffstat (limited to 'arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts')
| -rw-r--r-- | arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts index 4764a25585ab..41afea4f1da2 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -81,6 +81,13 @@ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio14>; |