Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung DT updates for v3.17" from Kukjin Kim:

exynos3250: add i2s dt for audio interface

exynos4
 - cleanup arm-pmu node because of 4 pmu on
   exynos4412 but 2 pmu on other exynos4 SoCs
 - add support sub-nodes to exynos usb host for exynos4

exynos4412-odroid-common
 - fix T-FLASH hotplug detection
 - disable 'always on' for BUCK8
 - add support for GPIO based buttons
 - add MAX98090 audio codec

exynos4412-odroidx2 and exynos4412-odroidu3
- refactor exynos4412-odroidx and exynos4412-odroid-common
  for odroid-x2 and u2/u3

exynos4412-odroidx
 - add support for USB phy, host and device
 - enable common hardware blocks, secure firmware calls,
   watchdog, g2d and fimc (mem2mem) multimedia accelerators
 - add support for USB phy, host and device
 - correct memory size

exynos5410
 - fill in CPU clock-frequency property to avoid warning

exynos5420
 - remove display pd because of instability

exynos5420-peach-pit and exynos5800-peach-pi
 - sort nodes each other to check its differences easily
 - enable audio support and add sound-card name property
 - add mask-tpm-reset node
 - add cros_ec including keyboard, i2c tunnel and tps65090
   and battery under the i2c tunnel

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add I2S dt node for exynos3250
  ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi
  ARM: dts: clean up arm-pmu node for exynos4
  ARM: dts: remove display power domain for exynos5420
  ARM: dts: Add sound nodes for Odroid-X2/U3 boards
  ARM: dts: fix T-FLASH hotplug detection for exynos4412-odroid-common
  ARM: dts: add support for GPIO buttons for exynos4412-odroid
  ARM: dts: disable 'always on' for BUCK8 regulator for exynos4412-odroid-common
  ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3
  ARM: dts: correct memory size for exynos4412-odroidx
  ARM: dts: add support for USB phy, host and device for exynos4412-odroidx
  ARM: dts: enable common hardware blocks for exynos4412-odroidx
  ARM: dts: add port sub-nodes to exynos usb host modules for exynos4
  ARM: dts: Add mask-tpm-reset node in exynos5800-peach-pi
  ARM: dts: Add mask-tpm-reset node in exynos5420-peach-pit
  ARM: dts: Add sound-card name for Snow/Peach-Pit/Peach-Pi
  ARM: dts: Fill in CPU clock-frequency for exynos5410
  ARM: dts: Sort nodes within Peach-pit/Peach-pi dts files
  ARM: dts: Enable audio support for exynos5800-peach-pi

1 files changed, 30 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 17b22e9cc2aa..08ea6dc9a92f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -123,6 +123,12 @@
 		reg = <0x10440000 0x1000>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>;
+	};
+
 	sys_reg: syscon@10010000 {
 		compatible = "samsung,exynos4-sysreg", "syscon";
 		reg = <0x10010000 0x400>;
@@ -322,6 +328,23 @@
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&exynos_usbphy 1>;
+		    status = "disabled";
+		};
+		port@1 {
+		    reg = <1>;
+		    phys = <&exynos_usbphy 2>;
+		    status = "disabled";
+		};
+		port@2 {
+		    reg = <2>;
+		    phys = <&exynos_usbphy 3>;
+		    status = "disabled";
+		};
 	};
 
 	ohci@12590000 {
@@ -331,6 +354,13 @@
 		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&exynos_usbphy 1>;
+		    status = "disabled";
+		};
 	};
 
 	i2s1: i2s@13960000 {