Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

1 files changed, 38 insertions, 14 deletions

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e44693e2cfda..834fb5a5306f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -193,6 +193,11 @@
 		reg = <0x10040000 0x5000>;
 	};
 
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
 	watchdog@101D0000 {
 		compatible = "samsung,exynos5250-wdt";
 		reg = <0x101D0000 0x100>;
@@ -268,7 +273,7 @@
 	sata_phy: sata-phy@12170000 {
 		compatible = "samsung,exynos5250-sata-phy";
 		reg = <0x12170000 0x1ff>;
-		clocks = <&clock 287>;
+		clocks = <&clock CLK_SATA_PHYCTRL>;
 		clock-names = "sata_phyctrl";
 		#phy-cells = <0>;
 		samsung,syscon-phandle = <&pmu_system_controller>;
@@ -551,22 +556,18 @@
 			compatible = "synopsys,dwc3";
 			reg = <0x12000000 0x10000>;
 			interrupts = <0 72 0>;
-			usb-phy = <&usb2_phy &usb3_phy>;
+			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+			phy-names = "usb2-phy", "usb3-phy";
 		};
 	};
 
-	usb3_phy: usbphy@12100000 {
-		compatible = "samsung,exynos5250-usb3phy";
+	usbdrd_phy: phy@12100000 {
+		compatible = "samsung,exynos5250-usbdrd-phy";
 		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
-		clock-names = "ext_xtal", "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbphy-sys {
-			reg = <0x10040704 0x8>;
-		};
+		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
 	};
 
 	usb@12110000 {
@@ -576,6 +577,12 @@
 
 		clocks = <&clock CLK_USB2>;
 		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy_gen 1>;
+		};
 	};
 
 	usb@12120000 {
@@ -585,6 +592,12 @@
 
 		clocks = <&clock CLK_USB2>;
 		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy_gen 1>;
+		};
 	};
 
 	usb2_phy: usbphy@12130000 {
@@ -602,6 +615,16 @@
 		};
 	};
 
+	usb2_phy_gen: phy@12130000 {
+		compatible = "samsung,exynos5250-usb2-phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+	};
+
 	pwm: pwm@12dd0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x12dd0000 0x100>;
@@ -708,6 +731,7 @@
 			 <&clock CLK_MOUT_HDMI>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				"sclk_hdmiphy", "mout_hdmi";
+		samsung,syscon-phandle = <&pmu_system_controller>;
 	};
 
 	mixer {
@@ -751,7 +775,7 @@
 		compatible = "samsung,exynos4210-secss";
 		reg = <0x10830000 0x10000>;
 		interrupts = <0 112 0>;
-		clocks = <&clock 348>;
+		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
 };