ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 510 deletions

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
deleted file mode 100644
index b4a851aa8881..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ /dev/null
@@ -1,510 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
- *                    Anand Moon <linux.amoon@gmail.com>
- */
-
-#include <dt-bindings/input/input.h>
-#include "exynos5422-odroid-core.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &mmc_0;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key>;
-
-		power-key {
-			/*
-			 * The power button (SW2) is connected to the PWRON
-			 * pin (active high) of the S2MPS11 PMIC, which acts
-			 * as a 16ms debouce filter and signal inverter with
-			 * output on ONOB pin (active low). ONOB PMIC pin is
-			 * then connected to XEINT3 SoC pin.
-			 */
-			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <0>;
-			wakeup-source;
-		};
-	};
-
-	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&emmc_nrst_pin>;
-		pinctrl-names = "default";
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 20972 0>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 130 170 230>;
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu0_alert0: cpu-alert-0 {
-					temperature = <50000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_alert1: cpu-alert-1 {
-					temperature = <60000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_alert2: cpu-alert-2 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_crit0: cpu-crit-0 {
-					temperature = <120000>; /* millicelsius */
-					hysteresis = <0>; /* millicelsius */
-					type = "critical";
-				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu0_alert2
-				 */
-				cpu0_alert3: cpu-alert-3 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "passive";
-				};
-				cpu0_alert4: cpu-alert-4 {
-					temperature = <85000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu0_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				/*
-				 * When reaching cpu0_alert3, reduce CPU
-				 * by 2 steps. On Exynos5422/5800 that would
-				 * (usually) be: 1800 MHz and 1200 MHz.
-				 */
-				map3 {
-					trip = <&cpu0_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				/*
-				 * When reaching cpu0_alert4, reduce CPU
-				 * further, down to 600 MHz (14 steps for big,
-				 * 8 steps for LITTLE).
-				 */
-				cpu0_cooling_map4: map4 {
-					trip = <&cpu0_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu1_alert0: cpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu1_alert1: cpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu1_alert2: cpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu1_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				cpu1_alert3: cpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				cpu1_alert4: cpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu1_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&cpu1_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				cpu1_cooling_map4: map4 {
-					trip = <&cpu1_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu2_alert0: cpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu2_alert1: cpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu2_alert2: cpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu2_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				cpu2_alert3: cpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				cpu2_alert4: cpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu2_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&cpu2_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				cpu2_cooling_map4: map4 {
-					trip = <&cpu2_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu3_alert0: cpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu3_alert1: cpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu3_alert2: cpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				cpu3_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				cpu3_alert3: cpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				cpu3_alert4: cpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu3_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&cpu3_alert3>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				cpu3_cooling_map4: map4 {
-					trip = <&cpu3_alert4>;
-					cooling-device = <&cpu0 3 8>,
-							 <&cpu1 3 8>,
-							 <&cpu2 3 8>,
-							 <&cpu3 3 8>,
-							 <&cpu4 3 14>,
-							 <&cpu5 3 14>,
-							 <&cpu6 3 14>,
-							 <&cpu7 3 14>;
-				};
-			};
-		};
-		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				gpu_alert0: gpu-alert-0 {
-					temperature = <50000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				gpu_alert1: gpu-alert-1 {
-					temperature = <60000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				gpu_alert2: gpu-alert-2 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "active";
-				};
-				gpu_crit0: gpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-				gpu_alert3: gpu-alert-3 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-				gpu_alert4: gpu-alert-4 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "passive";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&gpu_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&gpu_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&gpu_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				map3 {
-					trip = <&gpu_alert3>;
-					cooling-device = <&gpu 0 2>;
-				};
-				map4 {
-					trip = <&gpu_alert4>;
-					cooling-device = <&gpu 3 6>;
-				};
-			};
-		};
-	};
-};
-
-&buck10_reg {
-	/* Supplies vmmc-supply of mmc_0 */
-	regulator-always-on;
-	regulator-boot-on;
-};
-
-&hdmi {
-	status = "okay";
-	ddc = <&i2c_2>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-	vdd-supply = <&ldo6_reg>;
-};
-
-&hdmicec {
-	status = "okay";
-	needs-hpd;
-};
-
-&i2c_2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	/* used by HDMI DDC */
-	status = "okay";
-};
-
-&ldo26_reg {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on;
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	mmc-pwrseq = <&emmc_pwrseq>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	max-frequency = <200000000>;
-	vmmc-supply = <&ldo18_reg>;
-	vqmmc-supply = <&ldo3_reg>;
-};
-
-&pinctrl_0 {
-	power_key: power-key-pins {
-		samsung,pins = "gpx0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst-pins {
-		samsung,pins = "gpd1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};