diff options
| author | Lothar Waßmann <LW@KARO-electronics.de> | 2013-09-19 08:59:48 +0200 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2013-09-26 07:01:36 +0200 |
| commit | bc3875f1a61e30dc56b00ffbd55daabce271e2ee (patch) | |
| tree | 178809cf8235854c22018bf4cb753494b9c3fde8 /arch/arm/boot/dts/imx23-olinuxino.dts | |
| parent | ARM: dts: mxs: add pinctrl header files (diff) | |
| download | linux-bc3875f1a61e30dc56b00ffbd55daabce271e2ee.tar.xz linux-bc3875f1a61e30dc56b00ffbd55daabce271e2ee.zip | |
ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers
Convert mx23/mx28 dts filed to use the pinctrl header files.
NOTE: During automatic conversion of these files to use the pinconfig
definitions an inconsistency has been found in:
arch/arm/boot/dts/imx28-apx4devkit.dts
According to the comment the function for pad SSP2_SS0 should have
been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131
represents: MX28_PAD_SSP2_SS0__AUART3_TX
I used the later (though probably wrong) definition because that's
what is actually being used in the DTB.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx23-olinuxino.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx23-olinuxino.dts | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index fc766ae12e24..f575434d22ae 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "imx23.dtsi" +#include "imx23.dtsi" / { model = "i.MX23 Olinuxino Low Cost Board"; @@ -40,7 +40,7 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + MX23_PAD_GPMI_ALE__GPIO_0_17 >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -50,7 +50,7 @@ led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + MX23_PAD_SSP1_DETECT__GPIO_2_1 >; fsl,drive-strength = <0>; fsl,voltage = <1>; |