ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 634 deletions

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
deleted file mode 100644
index a3668a0827fc..000000000000
--- a/arch/arm/boot/dts/imx23.dtsi
+++ /dev/null
@@ -1,634 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-#include "imx23-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&icoll>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		spi0 = &ssp0;
-		spi1 = &ssp1;
-		usbphy0 = &usbphy0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx23-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			dma_apbh: dma-controller@80004000 {
-				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
-				#dma-cells = <1>;
-				dma-channels = <8>;
-				clocks = <&clks 15>;
-			};
-
-			ecc@80008000 {
-				reg = <0x80008000 0x2000>;
-				status = "disabled";
-			};
-
-			nand-controller@8000c000 {
-				compatible = "fsl,imx23-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <56>;
-				interrupt-names = "bch";
-				clocks = <&clks 34>;
-				clock-names = "gpmi_io";
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: spi@80010000 {
-				reg = <0x80010000 0x2000>;
-				interrupts = <15>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			etm@80014000 {
-				reg = <0x80014000 0x2000>;
-				status = "disabled";
-			};
-
-			pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					reg = <0>;
-					interrupts = <16>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					reg = <1>;
-					interrupts = <17>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					reg = <2>;
-					interrupts = <18>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM0__DUART_RX
-						MX23_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_AUART1_RX__AUART1_RX
-						MX23_PAD_AUART1_TX__AUART1_TX
-						MX23_PAD_AUART1_CTS__AUART1_CTS
-						MX23_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_I2C_SCL__AUART1_TX
-						MX23_PAD_I2C_SDA__AUART1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_2pins_a: auart1-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D14__AUART2_RX
-						MX23_PAD_GPMI_D15__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__GPMI_D00
-						MX23_PAD_GPMI_D01__GPMI_D01
-						MX23_PAD_GPMI_D02__GPMI_D02
-						MX23_PAD_GPMI_D03__GPMI_D03
-						MX23_PAD_GPMI_D04__GPMI_D04
-						MX23_PAD_GPMI_D05__GPMI_D05
-						MX23_PAD_GPMI_D06__GPMI_D06
-						MX23_PAD_GPMI_D07__GPMI_D07
-						MX23_PAD_GPMI_CLE__GPMI_CLE
-						MX23_PAD_GPMI_ALE__GPMI_ALE
-						MX23_PAD_GPMI_RDY0__GPMI_RDY0
-						MX23_PAD_GPMI_RDY1__GPMI_RDY1
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-						MX23_PAD_GPMI_CE1N__GPMI_CE1N
-						MX23_PAD_GPMI_CE0N__GPMI_CE0N
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_fixup: gpmi-pins-fixup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_GPMI_D08__SSP1_DATA4
-						MX23_PAD_GPMI_D09__SSP1_DATA5
-						MX23_PAD_GPMI_D10__SSP1_DATA6
-						MX23_PAD_GPMI_D11__SSP1_DATA7
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_pins_fixup: mmc0-pins-fixup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc0_sck_cfg: mmc0-sck-cfg@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc1_4bit_pins_a: mmc1-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D01__SSP2_DATA1
-						MX23_PAD_GPMI_D02__SSP2_DATA2
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc1_8bit_pins_a: mmc1-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D01__SSP2_DATA1
-						MX23_PAD_GPMI_D02__SSP2_DATA2
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-						MX23_PAD_GPMI_D04__SSP2_DATA4
-						MX23_PAD_GPMI_D05__SSP2_DATA5
-						MX23_PAD_GPMI_D06__SSP2_DATA6
-						MX23_PAD_GPMI_D07__SSP2_DATA7
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM2__PWM2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_D00__LCD_D00
-						MX23_PAD_LCD_D01__LCD_D01
-						MX23_PAD_LCD_D02__LCD_D02
-						MX23_PAD_LCD_D03__LCD_D03
-						MX23_PAD_LCD_D04__LCD_D04
-						MX23_PAD_LCD_D05__LCD_D05
-						MX23_PAD_LCD_D06__LCD_D06
-						MX23_PAD_LCD_D07__LCD_D07
-						MX23_PAD_LCD_D08__LCD_D08
-						MX23_PAD_LCD_D09__LCD_D09
-						MX23_PAD_LCD_D10__LCD_D10
-						MX23_PAD_LCD_D11__LCD_D11
-						MX23_PAD_LCD_D12__LCD_D12
-						MX23_PAD_LCD_D13__LCD_D13
-						MX23_PAD_LCD_D14__LCD_D14
-						MX23_PAD_LCD_D15__LCD_D15
-						MX23_PAD_LCD_D16__LCD_D16
-						MX23_PAD_LCD_D17__LCD_D17
-						MX23_PAD_GPMI_D08__LCD_D18
-						MX23_PAD_GPMI_D09__LCD_D19
-						MX23_PAD_GPMI_D10__LCD_D20
-						MX23_PAD_GPMI_D11__LCD_D21
-						MX23_PAD_GPMI_D12__LCD_D22
-						MX23_PAD_GPMI_D13__LCD_D23
-						MX23_PAD_LCD_DOTCK__LCD_DOTCK
-						MX23_PAD_LCD_ENABLE__LCD_ENABLE
-						MX23_PAD_LCD_HSYNC__LCD_HSYNC
-						MX23_PAD_LCD_VSYNC__LCD_VSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c_pins_a: i2c@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_I2C_SCL__I2C_SCL
-						MX23_PAD_I2C_SDA__I2C_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c_pins_b: i2c@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_ENABLE__I2C_SCL
-						MX23_PAD_LCD_HSYNC__I2C_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c_pins_c: i2c@2 {
-					reg = <2>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA1__I2C_SCL
-						MX23_PAD_SSP1_DATA2__I2C_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			digctl@8001c000 {
-				compatible = "fsl,imx23-digctl";
-				reg = <0x8001c000 2000>;
-				status = "disabled";
-			};
-
-			emi@80020000 {
-				reg = <0x80020000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
-				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
-						  "saif0", "empty", "auart0-rx", "auart0-tx",
-						  "auart1-rx", "auart1-tx", "saif1", "empty",
-						  "empty", "empty", "empty", "empty";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 16>;
-			};
-
-			dcp: crypto@80028000 {
-				compatible = "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
-				status = "okay";
-			};
-
-			pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				status = "disabled";
-			};
-
-			efuse@8002c000 {
-				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8002c000 0x2000>;
-				clocks = <&clks 15>;
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif@80030000 {
-				compatible = "fsl,imx23-lcdif";
-				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
-				clocks = <&clks 38>;
-				status = "disabled";
-			};
-
-			ssp1: spi@80034000 {
-				reg = <0x80034000 0x2000>;
-				interrupts = <2>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			tvenc@80038000 {
-				reg = <0x80038000 0x2000>;
-				status = "disabled";
-			};
-		};
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				reg = <0x80042000 0x2000>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				reg = <0x80046000 0x2000>;
-				dmas = <&dma_apbx 10>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			audio-out@80048000 {
-				reg = <0x80048000 0x2000>;
-				dmas = <&dma_apbx 1>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			audio-in@8004c000 {
-				reg = <0x8004c000 0x2000>;
-				dmas = <&dma_apbx 0>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx23-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
-				status = "disabled";
-				clocks = <&clks 26>;
-				#io-channel-cells = <1>;
-			};
-
-			spdif@80054000 {
-				reg = <0x80054000 2000>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			i2c: i2c@80058000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-i2c";
-				reg = <0x80058000 0x2000>;
-				interrupts = <27>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			rtc@8005c000 {
-				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 0x2000>;
-				interrupts = <22>;
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 30>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <5>;
-				status = "disabled";
-			};
-
-			timrot@80068000 {
-				compatible = "fsl,imx23-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
-				clocks = <&clks 28>;
-			};
-
-			auart0: serial@8006c000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <24>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			auart1: serial@8006e000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <59>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			duart: serial@80070000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80070000 0x2000>;
-				interrupts = <0>;
-				clocks = <&clks 32>, <&clks 16>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 41>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x40000>;
-			interrupts = <11>;
-			fsl,usbphy = <&usbphy0>;
-			clocks = <&clks 40>;
-			status = "disabled";
-		};
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};