ARM: mxs: Add SchulerControl SPS1 DTS file

Add DTS file for this custom board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 169 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
new file mode 100644
index 000000000000..e6cde8aa7fff
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
+						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
+						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "everspin,mr25h256", "mr25h256";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
+				status = "okay";
+
+				rtc: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c64";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy0_pins_b>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+		};
+	};
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led@1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <0>;
+		};
+
+		led@2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <1>;
+		};
+
+		led@3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			default-trigger = "heartbeat";
+			reg = <2>;
+		};
+
+	};
+};