ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.

The following devices/functionalities were added:
 * Main and secondary UARTs.
 * i2c and the pcf8563 device.
 * Ethernet.
 * NAND.
 * The BP1 button.
 * The LED.
 * Watchdog
 * SD.

Cc: Eric Bénard <eric@eukrea.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 143 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000000..1bdec21f4533
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+			>;
+		};
+
+		pinctrl_bp1: bp1grp {
+			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_led1: led1grp {
+			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+				MX35_PAD_RTS2__UART2_RTS		0x1c5
+				MX35_PAD_CTS2__UART2_CTS		0x1c5
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};