ARM: dts: imx: use nodes label in board dts

Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 224 insertions, 232 deletions

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 567e7ee72f91..fb33aff5b4b9 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -21,239 +21,20 @@
 		reg = <0x90000000 0x20000000>;
 	};
 
-	soc {
-		display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 0>;
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp1_1>;
-		};
-
-		display@di1 {
-			compatible = "fsl,imx-parallel-display";
-			crtcs = <&ipu 1>;
-			interface-pix-fmt = "rgb565";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp2_1>;
-		};
-
-		aips@70000000 { /* aips-1 */
-			spba@70000000 {
-				esdhc@70004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_1>;
-					fsl,cd-controller;
-					fsl,wp-controller;
-					status = "okay";
-				};
-
-				esdhc@70008000 { /* ESDHC2 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc2_1>;
-					cd-gpios = <&gpio1 6 0>;
-					wp-gpios = <&gpio1 5 0>;
-					status = "okay";
-				};
-
-				uart3: serial@7000c000 {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_uart3_1>;
-					fsl,uart-has-rtscts;
-					status = "okay";
-				};
-
-				ecspi@70010000 { /* ECSPI1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
-					status = "okay";
-
-					pmic: mc13892@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						compatible = "fsl,mc13892";
-						spi-max-frequency = <6000000>;
-						reg = <0>;
-						interrupt-parent = <&gpio1>;
-						interrupts = <8 0x4>;
-
-						regulators {
-							sw1_reg: sw1 {
-								regulator-min-microvolt = <600000>;
-								regulator-max-microvolt = <1375000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw2_reg: sw2 {
-								regulator-min-microvolt = <900000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw3_reg: sw3 {
-								regulator-min-microvolt = <1100000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw4_reg: sw4 {
-								regulator-min-microvolt = <1100000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vpll_reg: vpll {
-								regulator-min-microvolt = <1050000>;
-								regulator-max-microvolt = <1800000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vdig_reg: vdig {
-								regulator-min-microvolt = <1650000>;
-								regulator-max-microvolt = <1650000>;
-								regulator-boot-on;
-							};
-
-							vsd_reg: vsd {
-								regulator-min-microvolt = <1800000>;
-								regulator-max-microvolt = <3150000>;
-							};
-
-							vusb2_reg: vusb2 {
-								regulator-min-microvolt = <2400000>;
-								regulator-max-microvolt = <2775000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vvideo_reg: vvideo {
-								regulator-min-microvolt = <2775000>;
-								regulator-max-microvolt = <2775000>;
-							};
-
-							vaudio_reg: vaudio {
-								regulator-min-microvolt = <2300000>;
-								regulator-max-microvolt = <3000000>;
-							};
-
-							vcam_reg: vcam {
-								regulator-min-microvolt = <2500000>;
-								regulator-max-microvolt = <3000000>;
-							};
-
-							vgen1_reg: vgen1 {
-								regulator-min-microvolt = <1200000>;
-								regulator-max-microvolt = <1200000>;
-							};
-
-							vgen2_reg: vgen2 {
-								regulator-min-microvolt = <1200000>;
-								regulator-max-microvolt = <3150000>;
-								regulator-always-on;
-							};
-
-							vgen3_reg: vgen3 {
-								regulator-min-microvolt = <1800000>;
-								regulator-max-microvolt = <2900000>;
-								regulator-always-on;
-							};
-						};
-					};
-
-					flash: at45db321d@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-						spi-max-frequency = <25000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				ssi2: ssi@70014000 {
-					fsl,mode = "i2s-slave";
-					status = "okay";
-				};
-			};
-
-			iomuxc@73fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
-							697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
-							737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
-							740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
-							121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
-							402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
-							405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@73fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_1>;
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			uart2: serial@73fc0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2_1>;
-				status = "okay";
-			};
-		};
-
-		aips@80000000 {	/* aips-2 */
-			i2c@83fc4000 { /* I2C2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2_1>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					clock-frequency = <26000000>;
-					VDDA-supply = <&vdig_reg>;
-					VDDIO-supply = <&vvideo_reg>;
-				};
-			};
-
-			audmux@83fd0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_audmux_1>;
-				status = "okay";
-			};
+	display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+	};
 
-			ethernet@83fec000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fec_1>;
-				phy-mode = "mii";
-				status = "okay";
-			};
-		};
+	display@di1 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 1>;
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
 	};
 
 	gpio-keys {
@@ -281,3 +62,214 @@
 		mux-ext-port = <3>;
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	fsl,cd-controller;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	cd-gpios = <&gpio1 6 0>;
+	wp-gpios = <&gpio1 5 0>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 0x4>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				694  0x20d5	/* MX51_PAD_GPIO1_0__SD1_CD */
+				697  0x20d5	/* MX51_PAD_GPIO1_1__SD1_WP */
+				737  0x100	/* MX51_PAD_GPIO1_5__GPIO1_5 */
+				740  0x100	/* MX51_PAD_GPIO1_6__GPIO1_6 */
+				121  0x5	/* MX51_PAD_EIM_A27__GPIO2_21 */
+				402  0x85	/* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+				405  0x85	/* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clock-frequency = <26000000>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "mii";
+	status = "okay";
+};