Merge tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.15" from Shawn Guo:

 - New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
   TX modules for MB7 from  Ka-Ro Electronics, i.MX6 Wandboard revd1
   variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
   Vining-2000 board.
 - Use the 'vpcie-supply' property for PCIe device for boards
   imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
 - A series from Jagan Teki to update imx6qdl-icore board with audio,
   touch and CAN support.
 - Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
   tempmon support for i.MX6UL.
 - A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
   and i.MX6 TX modules.
 - Fix DTC warnings in i.MX device trees, dropping leading zeros from
   unit address, correcting display nodes notation and display port
   names, fixing nodes with unit name and no reg property.
 - Other random device updates for various board support.

* tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
  ARM: dts: imx53-tx53: fix interrupt flags
  ARM: dts: imx28-tx28: fix interrupt flags
  ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
  ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property
  ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property
  ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property
  ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property
  ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property
  ARM: dts: imx: add ZII RDU1 board
  ARM: dts: imx: add support for TX6 modules on MB7 baseboard
  ARM: dts: imx: add support for TX6QP
  ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
  ARM: dts: imx6-tx6: move display configuration to .dtsi file
  ARM: dts: imx6-tx6: add support for I2C bus recovery
  ARM: dts: imx6-tx6: convert to using simple-audio-card
  ARM: dts: imx6-tx6: specify ethernet phy reset post-delay
  ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
  ARM: dts: imx6-tx6: add trickle-charge config for DS1339
  ARM: dts: imx6-tx6: remove obsolete ipu1 alias
  ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
  ...

[arnd: made sure we have no new leading zeroes in unit address during merge]

1 files changed, 834 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
new file mode 100644
index 000000000000..49be0e1c812d
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -0,0 +1,834 @@
+/*
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "ZII RDU1 Board";
+	compatible = "zii,imx51-rdu1", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+		rtc0 = &ds1341;
+	};
+
+	clk_26M_osc: 26M_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_26M_osc_gate: 26M_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz>;
+		clocks = <&clk_26M_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_26M_usb: usbhost_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_26M_snd: snd_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sndgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		/* no compatible here, bootloader will patch in correct one */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_3p3v>;
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swi2c>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
+			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,delay-us = <50>;
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			clocks = <&clk_26M_snd>;
+			VDDA-supply = <&vdig_reg>;
+			VDDIO-supply = <&vvideo_reg>;
+			#sound-dai-cells = <0>;
+		};
+	};
+
+	spi_gpio: spi-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiospi0>;
+		status = "okay";
+
+		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+
+		eeprom@0 {
+			compatible = "eeprom-93xx46";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+			spi-cs-high;
+			data-size = <8>;
+		};
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dsa,member = <0 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "RDU1 audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT";
+		simple-audio-card,aux-devs = <&tpa6130a2>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk_26M_snd>;
+		};
+	};
+
+	usbh1phy: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+	};
+
+	usbh2phy: usbphy2 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled0 {
+				reg = <3>;
+				label = "system:green:status";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled1 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen3_reg>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	tpa6130a2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ampgpio>;
+		power-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_3p3v>;
+	};
+
+	ds1341: rtc@68 {
+		compatible = "maxim,ds1341";
+		reg = <0x68>;
+	};
+
+	/* touch nodes default disabled, bootloader will enable the right one */
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@4c {
+		compatible = "atmel,maxtouch";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@20 {
+		compatible = "syna,rmi4_i2c";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touch-inverted-y;
+			touch-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh1phy>;
+	disable-over-current;
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh2phy>;
+	disable-over-current;
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ampgpio: ampgpiogrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_9__GPIO1_9		0x5e
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0xa5
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x85
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0xa5
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz: clk26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x1f5
+			MX51_PAD_NANDF_D9__FEC_RDATA0		0x2180
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x180
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x180
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x180
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x180
+			MX51_PAD_NANDF_D11__FEC_RX_DV		0x2084
+			MX51_PAD_EIM_CS5__FEC_CRS		0x180
+			MX51_PAD_NANDF_RB2__FEC_COL		0x2180
+			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x2180
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x2004
+			MX51_PAD_NANDF_CS3__FEC_MDC		0x2004
+			MX51_PAD_NANDF_D8__FEC_TDATA0		0x2180
+			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x2004
+			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x2004
+			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_EIM_A20__GPIO2_14		0x85
+		>;
+	};
+
+	pinctrl_gpiospi0: gpiospi0grp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D18__GPIO4_11		0x85
+			MX51_PAD_CSI2_D19__GPIO4_12		0x85
+			MX51_PAD_CSI2_HSYNC__GPIO4_14		0x85
+			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x85
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_D0_CS__GPIO3_3		0x85
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x1e0
+			MX51_PAD_GPIO1_8__GPIO1_8		0x21e2
+		>;
+	};
+
+	pinctrl_sndgate26mhz: sndgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+		>;
+	};
+
+	pinctrl_swi2c: swi2cgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__GPIO1_2		0xc5
+			MX51_PAD_DI1_D1_CS__GPIO3_4		0x400001f5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D14__GPIO3_26		0x21e6
+			MX51_PAD_NANDF_D15__GPIO3_25		0x21e6
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D8__GPIO3_12		0x85
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c4
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0xc5
+			MX51_PAD_UART2_TXD__UART2_TXD		0xc5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usbgate26mhz: usbgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT6__GPIO1_19		0x85
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_STP__USBH1_STP		0x0
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x0
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x0
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x0
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x0
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x0
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x0
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x0
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x0
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x0
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x0
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x0
+		>;
+	};
+
+	pinctrl_usbh1phy: usbh1phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D0__GPIO4_8		0x85
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			MX51_PAD_EIM_A26__USBH2_STP		0x0
+			MX51_PAD_EIM_A24__USBH2_CLK		0x0
+			MX51_PAD_EIM_A25__USBH2_DIR		0x0
+			MX51_PAD_EIM_A27__USBH2_NXT		0x0
+			MX51_PAD_EIM_D16__USBH2_DATA0		0x0
+			MX51_PAD_EIM_D17__USBH2_DATA1		0x0
+			MX51_PAD_EIM_D18__USBH2_DATA2		0x0
+			MX51_PAD_EIM_D19__USBH2_DATA3		0x0
+			MX51_PAD_EIM_D20__USBH2_DATA4		0x0
+			MX51_PAD_EIM_D21__USBH2_DATA5		0x0
+			MX51_PAD_EIM_D22__USBH2_DATA6		0x0
+			MX51_PAD_EIM_D23__USBH2_DATA7		0x0
+		>;
+	};
+
+	pinctrl_usbh2phy: usbh2phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D1__GPIO4_7		0x85
+		>;
+	};
+};