summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx53-ard.dts
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2013-11-04 07:45:46 +0100
committerShawn Guo <shawn.guo@linaro.org>2014-02-09 14:32:25 +0100
commit7ac0f700a6d747c2a8a873e301e82092306173e4 (patch)
treeefa2ea9c8062d3b2b6ba9ca4a34ed4099838aaa3 /arch/arm/boot/dts/imx53-ard.dts
parentARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module (diff)
downloadlinux-7ac0f700a6d747c2a8a873e301e82092306173e4.tar.xz
linux-7ac0f700a6d747c2a8a873e301e82092306173e4.zip
ARM: dts: imx53: make pinctrl nodes board specific
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx53-ard.dts')
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts28
1 files changed, 25 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 174f86938c89..bf0a42cda055 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -99,7 +99,7 @@
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
@@ -109,7 +109,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-ard {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_1__GPIO1_1 0x80000000
@@ -148,11 +148,33 @@
MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000
>;
};
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};