Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 345 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
new file mode 100644
index 000000000000..3f825a6813da
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -0,0 +1,345 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	memory {
+		reg = <0x70000000 0x40000000>;
+	};
+
+	display0: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		status = "disabled";
+		display-timings {
+			claawvga {
+				native-mode;
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 8 0>;
+			linux,code = <116>; /* KEY_POWER */
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 0>;
+	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7@0 {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};